Up

@pipes80 - In your image at post #12 - test item 5713648
To unsupress that, edit >> 46 02 19 82 12 06 5D 11 01 00 >> Change to >> 46 0A 00 00 00 00 00 00 00 00

This = below, and removes the suppression and gray out if all at same time.
Suppress IF 0A 82
False (46 0A 00 00 00 00 00 00 00 00)

Then test, if you can see item in BIOS or not (ROOT menu that contains this setting must already be visible, or you need other edit to that first)
If you CAN see root menu that contains this setting, but the setting still not visible after above edit, then you need to do AMITSE/SetupData edit.
In AMITSE/SetupData BODY >> Search BA 0E, find the one with 7B 04 and 7C 04 near it, then edit the 15th byte after BA 0E, if 01, change to 07, if 09, change to 0F, if other show me and I will tell you

Zitat von Lost_N_BIOS im Beitrag #17

---

@pipes80 - In your image at post #12 - test item 5713648
To unsupress that, edit >> 46 02 19 82 12 06 5D 11 01 00 >> Change to >> 46 0A 00 00 00 00 00 00 00 00

This = below, and removes the suppression and gray out if all at same time.
Suppress IF 0A 82
False (46 0A 00 00 00 00 00 00 00 00)

Then test, if you can see item in BIOS or not (ROOT menu that contains this setting must already be visible, or you need other edit to that first)
If you CAN see root menu that contains this setting, but the setting still not visible after above edit, then you need to do AMITSE/SetupData edit.
In AMITSE/SetupData BODY >> Search BA 0E, find the one with 7B 04 and 7C 04 near it, then edit the 15th byte after BA 0E, if 01, change to 07, if 09, change to 0F, if other show me and I will tell you

---

Zitat von pipes80 im Beitrag #1

---

There is possibility to unlock various option in bios, dc loadline or other like sadc loadline? or there is a guide how to enable that option?

---

@pipes80 - Sorry, I don't understand your first comment at post #18? Ohh!
I see what you mean, you are in wrong model for the 15th byte stuff I mentioned at post #17, this is about Access Level Edit, this is done in AMITSE/SetupData module NOT Setup

I gave you the exact edit you need to make, directly in front of 05 91 7B 04 7C 04 BA 0E 01 00 AD 09 10 10 00 02 00 >> Edit >> 46 02 19 82 12 06 5D 11 01 00 >> Change to >> 46 0A 00 00 00 00 00 00 00 00
Then make BIOS, test and see if you can then see "test item 5713648" if not, then you also need to do AMITSE/SetupData Edit on top of that to change Access Level
Test this setup module edit by itself first! You may not need to edit AMITSE/SetupData to change Access Level.

Let me explain this edit above, see also, this post (#53+55) for more in-depth examples of this kind of edit

Before >>
Suppress If {0A 82}
TRUE {46 02}
Gray Out If {19 82}
QuestionID 0x115D equals value 0x1 {12 06 5D 11 01 00 }

After Edit >> we change ALL Suppress instruction If to false, and take up remaining space of all other variables/commands instead>>
Suppress If {0A 82}
FALSE {47 0A 00 00 00 00 00 00 00 00}

Other settings, we're discussing in your other thread. The above only about the setting you asked about in #12 ("test item 5713648)
For other suppressed items, yes, you need to unsuppress and or ungray first too, then after that if still hidden you may also need access level edit on top of that (in AMITSE/SetupData)

Zitat von Lost_N_BIOS im Beitrag #19

---

@pipes80 - Sorry, I don't understand your first comment at post #18? Ohh!
I see what you mean, you are in wrong model for the 15th byte stuff I mentioned at post #17, this is about Access Level Edit, this is done in AMITSE/SetupData module NOT Setup

I gave you the exact edit you need to make, directly in front of 05 91 7B 04 7C 04 BA 0E 01 00 AD 09 10 10 00 02 00 >> Edit >> 46 02 19 82 12 06 5D 11 01 00 >> Change to >> 46 0A 00 00 00 00 00 00 00 00
Then make BIOS, test and see if you can then see "test item 5713648" if not, then you also need to do AMITSE/SetupData Edit on top of that to change Access Level
Test this setup module edit by itself first! You may not need to edit AMITSE/SetupData to change Access Level.

Let me explain this edit above, see also, this post (#53+55) for more in-depth examples of this kind of edit

Before >>
Suppress If {0A 82}
TRUE {46 02}
Gray Out If {19 82}
QuestionID 0x115D equals value 0x1 {12 06 5D 11 01 00 }

After Edit >> we change ALL Suppress instruction If to false, and take up remaining space of all other variables/commands instead>>
Suppress If {0A 82}
FALSE {47 0A 00 00 00 00 00 00 00 00}

Other settings, we're discussing in your other thread. The above only about the setting you asked about in #12 ("test item 5713648)
For other suppressed items, yes, you need to unsuppress and or ungray first too, then after that if still hidden you may also need access level edit on top of that (in AMITSE/SetupData)

---

Yes, that is the only place this is located, as I mentioned.

In post #17 I discuss TWO different edits (Change suppression & Change Access Level), in TWO different modules (Setup & AMITSE/SetupData).
Do first edit in setup only, then test. If still not visible, then do second one on top of that mod BIOS, in AMITSE/SetupData module.

Also Setup and SetupData (Actual >> AMITSE/SetupData) are not the same BIOS module at all! AMITSE/SetupData, you will find below AMITSE, or within expanded AMITSE module itself (some BIOS), usually near bottom of DXE volume (same volume w/ setup)
What you show in image above is Setup module, NOT SetupData - Don't get these confused or mix them up while editing

Zitat von Lost_N_BIOS im Beitrag #21

---

Yes, that is the only place this is located, as I mentioned.

In post #17 I discuss TWO different edits (Change suppression & Change Access Level), in TWO different modules (Setup & AMITSE/SetupData).
Do first edit in setup only, then test. If still not visible, then do second one on top of that mod BIOS, in AMITSE/SetupData module.

Also Setup and SetupData (Actual >> AMITSE/SetupData) are not the same BIOS module at all! AMITSE/SetupData, you will find below AMITSE, or within expanded AMITSE module itself (some BIOS)
What you show in image above is Setup module, NOT SetupData - Don't get these confused or mix them up while editing [lke]

---

Please see my edits above, I edited probably 3-5 times while you were replying
That "sequence" is not in AMITSE/SetupData, not at all. Please read over what I wrote about AMITSE/SetupData and how to find/edit at post #17 (last sentence there is all there is about this, nothing else related to this in that post, only last line)

If you can't get it figured out, let me know and I will do the edit, then send you before/after both modified modules so you can see the edit, and two BIOS to test (one with Setup edit only, and second with both Setup + AMITSE/SetupData edit)
Similar edit also explained in post #10, but for different BIOS setting

Zitat von Lost_N_BIOS im Beitrag #23

---

Please see my edits above, I edited probably 3-5 times while you were replying
That "sequence" is not in AMITSE/SetupData, not at all. Please read over what I wrote about AMITSE/SetupData and how to find/edit at post #17 (last sentence there is all there is about this, nothing else related to this in that post, only last line)

If you can't get it figured out, let me know and I will do the edit, then send you before/after both modified modules so you can see the edit, and two BIOS to test (one with Setup edit only, and second with both Setup + AMITSE/SetupData edit)
Similar edit also explained in post #10, but for different BIOS setting

---

You're still mixing up the two different module edits I discussed. 15th byte edit comments do NOT apply to anything inside "Setup" module (Shown in your image, selected tab is "Setup" module)
Additionally, the bytes you have highlighted in the image are not used to locate/edit anything AMITSE/SetupData, and will not be found in there either. See post #17 for how to find area to edit in AMITSE/SetupData and what the 15th byte comment applies to after you locate this area
As mentioned, if you want, I will do both edits, and send you before/after files, so you can then see what is done and you will then understand right away

Zitat von Lost_N_BIOS im Beitrag #25

---

You're still mixing up the two different module edits I discussed. 15th byte edit comments do NOT apply to anything inside "Setup" module (Shown in your image, selected tab is "Setup" module)
Additionally, the bytes you have highlighted in the image are not used to locate/edit anything AMITSE/SetupData, and will not be found in there either. See post #17 for how to find area to edit in AMITSE/SetupData and what the 15th byte comment applies to after you locate this area
As mentioned, if you want, I will do both edits, and send you before/after files, so you can then see what is done and you will then understand right away

---

Here, please pay attention to how I extracted these modules, if you use them to insert into any BIOS. I extract setup PE32 "As-Is" and AMITSE/SetupData BODY, after expanded all the way with UEFITool, inside select SetupData and extract BODY.
This only important if you use these modules, otherwise you can extract/replace however you are used to.
Otherwise, just use these so you can compare side by side stock and Mod files, to see the edits.
http://s000.tinyupload.com/index.php?fil...868177934846405

Setup PE32 edit should be tested in mod BIOS by itself first
Then, if not visible, make new mod BIOS with both Setup PE32 & AMISTE/SetupData edit in BIOS at same time

Zitat von Lost_N_BIOS im Beitrag #27

---

Here, please pay attention to how I extracted these modules, if you use them to insert into any BIOS. I extract setup PE32 "As-Is" and AMITSE/SetupData BODY, after expanded all the way with UEFITool, inside select SetupData and extract BODY.
This only important if you use these modules, otherwise you can extract/replace however you are used to.
Otherwise, just use these so you can compare side by side stock and Mod files, to see the edits.
http://s000.tinyupload.com/index.php?fil...868177934846405

Setup PE32 edit should be tested in mod BIOS by itself first
Then, if not visible, make new mod BIOS with both Setup PE32 & AMISTE/SetupData edit in BIOS at same time

---

@pipes80 - Sounds like you replaced incorrect module w/ wrong files, or incorrect module in incorrect way etc. The files are fine, it's just user insert error
That's why I said be careful if you used those files, I expected that would happen and hoped you would not insert them unless you were 100% sure how, asked for more info etc!
Better you extract/replace your own files your own way, just use my files to look at side by side with hex editor, then make your own same edit.

If you want to know exactly what you did wrong, send me the file you flashed in and I will check it and let you know, show you in images etc
I assume probably you didn't expand AMITSE/SetupData and select SetupData and then replace BODY. But, could be you replaced Setup PE32 as-is incorrectly (if you did not expand to PE32, select it, then replace as-is)
Hard to say, I'd have to see your file you flashed

Could also be UEFITool version used, if you have not already replaced these modules with version you are using and flashed a mod BIOS already and it's OK (due to padding remove/add issue)
I have not checked if this BIOS has issues relating to that or not, suggest you use 25.0

Or, send me your original FPT BIOS region dump, and I will do the edit inserts for you if you want?

And, you should be following my instructions!! Setup edit only should have been tested first, what was the outcome of that edit/flash??

Zitat von Lost_N_BIOS im Beitrag #29

---

@pipes80 - Sounds like you replaced incorrect module w/ wrong files, or incorrect module in incorrect way etc. The files are fine, it's just user insert error
That's why I said be careful if you used those files, I expected that would happen and hoped you would not insert them unless you were 100% sure how, asked for more info etc!
Better you extract/replace your own files your own way, just use my files to look at side by side with hex editor, then make your own same edit.

If you want to know exactly what you did wrong, send me the file you flashed in and I will check it and let you know, show you in images etc
I assume probably you didn't expand AMITSE/SetupData and select SetupData and then replace BODY. But, could be you replaced Setup PE32 as-is incorrectly (if you did not expand to PE32, select it, then replace as-is)
Hard to say, I'd have to see your file you flashed

---