It might be because without an AGESA update it might brick peeps trying to use the updated BIOS if they don't have USB Flashback.

That should not be why UBU does not add microcodes for AMD, that kind of thing is to system specific and many systems/models are 100% compatible with lots of microcodes/CPU's that may not be in the BIOS
I assume due to where they are stored and how, but this used to cause UBU to also not be able to update them too, but now it can, so it should also be able to add as well
-------------------------

@KedarWolf - Do you have an older version of 00A20F10, than the one you sent? If yes, send to me, thanks. I have a new test idea, but need older microcode first

@Fernando - Thanks! I was not sure how often or how much you used UBU, I assumed a lot since you wrote out that very in depth guide.
But yes, I know what you mean, and agree, updates/changes always add new messes
Sorry, I just always assumed you had covered all steps necessary there since it was such and in-depth guide, but yes, all this new stuff always adding more wrinkles to our ventures
All sorted now since post #28 anyway, so it's Ok

I am not sure who would be good user to take over the UBU guide, why was it never SoniX from the start, did he just not have time to do + work on UBU itself?

I am OP on several threads on mydigitallife.net and overclock.net including the Official GTX 1080 Ti one that has 18411 Posts.

Here is one I wrote from scratch.

https://forums.mydigitallife.net/threads...tsc-2019.80038/

If you want me to take over the guide, I wouldn't mind. :)

@Lost_N_BIOS

I have issues with the BIOS the guy unlocked for me I don't have with the same stock BIOS that isn't unlocked.

What it is with the unlocked BIOS, I need to unplug my DP cable and leave only my second monitor HDMI cable in when I reboot or I get a VGA Error on my motherboard boot display and PC doesn't boot.

The stock not unlocked BIOS doesn't do this. I think when the guy unlocked it for me, he messed something up that causes the error.

You think you can unlock everything in the CBS and PBS menu for me, see if it fixes it? If you want to wait until you get the $20 Friday I'm okay with that. :)

Here is the direct link to it.

https://download.msi.com/bos_exe/mb/7C34v193.zip

Here are the menus.

@Fernando ^^ See #35

@KedarWolf - That could be settings issue, or vBIOS on the card etc. Odd stock would not do that, but mod would, are you sure it's same BIOS version?
Did you load optimal after flashing in his mod BIOS, then save and reboot back to BIOS to make your other changes?

Yes, I can unlock CBS/PBS entire contents without any issues, provided you can see CBS/PBS by default?
I need to see ENTIRE contents of stock CBS/PBS, ALL Settings, top to bottom, on all submenus inside each one.
Please put all these images in a max compressed zip, thanks.

I do not need to wait on any donations or anything like that, you know me, I work for free as time permits, anything someone send to me is just an appreciated bonus

Here was what I was thinking, when I mentioned that above at edit in post #32 - >> 00A00F00 - Replace with >> 00A20F10 via hex
Then updated via UBU, in case any checksum corrections are to be made anywhere during this kind of update process.
I checked the module after, and it does not look like it, but could be elsewhere, and that is why I wanted to do this UBU test (since we cannot add w/ UBU)

If this also fails, then I think it pretty much confirms Agesa update needed here, and or other modules as well.

https://drive.google.com/file/d/1KCRAwn-...iew?usp=sharing

Lots of sub menus. Zip with max compression bigger than 6MB. :(

Zitat von Lost_N_BIOS im Beitrag #32

---

That should not be why UBU does not add microcodes for AMD, that kind of thing is to system specific and many systems/models are 100% compatible with lots of microcodes/CPU's that may not be in the BIOS
I assume due to where they are stored and how, but this used to cause UBU to also not be able to update them too, but now it can, so it should also be able to add as well
-------------------------

@KedarWolf - Do you have an older version of 00A20F10, than the one you sent? If yes, send to me, thanks. I have a new test idea, but need older microcode first

---

@KedarWolf - Here is new test for those guys >> 00A00F00 Removed >> Replace with >> 00A20F10 >> Updated with UBU after
I'd say if this fails, then for sure something else is needed in BIOS, Agesa update and or other modules also updated/changed
http://s000.tinyupload.com/index.php?fil...916625628031447

You never answered me, for the mod BIOS for you, with stock BIOS can you already see CBS/PBS menu by default?
And if yes, just to confirm, the images above are from stock BIOS flashed in correct?

The images are from the buggy mod BIOS. NO PBS or CBS menus in the stock BIOS.

@KedarWolf - Ohh, OK. Here, please redo the images, sorry
I guess this is ONLY needed, if ANYTHING looks different, even a single added or removed setting, because I will be starting with and only editing stock BIOS, so I need to see what to enable/disable directly on that.
This is stock BIOS, I then only unlocked the CBS/PBS and did nothing else yet - http://s000.tinyupload.com/index.php?fil...759552472593422

If everything looks exactly same as the images you sent me, then OK, thanks, and let me know. Then I will unlock the rest of what's missing, and hide that empty menu (if it's really empty inside, I will check first)

Only two things still not working, but might be limitations of my CPU etc.

Edit: The 300/400/500 Chipset Common Options doesn't open at all.

@KedarWolf - As mentioned, I ONLY enabled the menus, nothing else yet. So some stuff may not work, some may not be visible, etc.
Reminder for self, so I don't have to look back, previously you said >> NVDIMM opens but doesn't show anything, the 300/400/500 Chipset Common Options doesn't open at all
So, all same/same then, and I can use the images you provided earlier? What actually happens when you select and try to enter 300/400/500 options? And yes, that may be CPU specific, but doesn't 300 apply to your CPU type?

I looked inside 300/400/500, there is a single suppressed setting, so it may be, if he did not unsuppress this for you, then that may be why it's locking you out?
But, I would expect it to be suppressed instead (hidden), and then inside contents just blank, that's how this should work. But, I'll make it visible for you, and then we'll sort why you can't enter

300/400/500 Chipset Common Options, VarStoreInfo (VarOffset/VarName): 0xFFFF, VarStore: 0x0, QuestionId: 0x9, FormId: 0x7009 {0F 0F 0D 00 0D 00 09 00 00 00 FF FF 00 09 70}
0x1697B Suppress If {0A 82}
0x1697D QuestionId: 0xA equals value 0xFF {12 86 0A 00 FF 00}
0x16983 Not {17 02}
0x16985 End {29 02}
0x16987 Numeric: Combo CBS, VarStoreInfo (VarOffset/VarName): 0x20, VarStore: 0x5000, QuestionId: 0xA, Size: 1, Min: 0x0, Max 0xFF, Step: 0x0 {07 91 0E 00 0F 00 0A 00 00 50 20 00 10 20 00 FF 00}
0x16998 Default: DefaultId: 0x0, Value (8 bit): 0xFE {5B 06 00 00 00 FE}
0x1699E End {29 02}
0x169A0 End If {29 02}

While I was in there, I checked NVDIMM for you, it's blank inside, so we'll hide it >>

Form: NVDIMM, FormId: 0x7019 {01 86 19 70 F3 00}
0x1955F Subtitle: Statement.Prompt: NVDIMM, Flags: 0x0 {02 87 F3 00 00 00 00}
0x19566 End {29 02}
0x19568 Subtitle: Statement.Prompt: , Flags: 0x0 {02 87 02 00 00 00 00}
0x1956F End {29 02}
0x19571 End Form {29 02}