Great, thanks for confirmation! When I get back later today or tonight, I will unlock rest of BIOS for you
--------------------------

@Quaxth - Quick test, just to confirm this change, before I do a bunch of others in similar manner
Can you now see/select and change a new Video Memory option with 1MB or 8MB choices?
The black/grayed out one shown current amount under total memory will remain (we can remove later if you want, if it seems like a "dupe" to you)
http://s000.tinyupload.com/index.php?fil...195693003674624

Also, when you reply with result, please let me know if you want the original info/grayed out one removed in next edit, leaving only the actual setting one instead?

Thanks for No.4! Works fine and as it should!

Maybe leave the original settings grayed out, it's after done more easy to remember what was changed.

Otherwise, nothing to tell!

Thanks a lot and Cheers.

So, you do see both yes? The original gray/blacked out one that shows current applied value for video memory + You can now also see one below that where you can choose 1MB or 8MB, correct?
Sorry for asking again, just want to be sure

YES, I see both now as well as the grayed out value.

All is ok for now!

Thanks a lot.
-------------------------

In the Power Menue/Advanced CPU Control the 4. and 5. blacked (locked) out and could not be changed. Maybe that could be changed?

Otherwise, I didn't see any other which may be useful to use.

Thanks.

You can't see boot menu? I can't tell, your images all have a glare across the top, so I can't see what all main sections you can see except for some
If you can see boot menu, I need image of this (root image)

I've no problems to see the Boot Menu! That was only on the first test BIOS the fact. Please take a look at these 3 pictures: https://i.postimg.cc/26gDQ9rZ/Main-Off-20.png, https://i.postimg.cc/nr7t0Khw/Main-Off-21.png, https://i.postimg.cc/VLQw5h7y/Main-Off-22.png

The last 3 builds of the BIOS didn't have any problems like the first build had!

Hope this helps you because, as I already told, my Camera has a damaged LCD screen and it's difficult to make good pictures with it now!

Thanks.

Thanks! That image "Main Off 20" was missing from the package you sent, so was not sure if you could see Boot section or not
No worries, no new pictures needed for now!

@Quaxth - Here, mid-way done test needed, please show me root of Advanced, and also show me inside "Advanced CPU Control" (Top to bottom, may need two images)
Some of this stuff we are enabling, may not apply to your CPU (such as "Turbo" or "VT"), I am not sure outcome if you enable some setting like that?
http://s000.tinyupload.com/index.php?fil...346915262438427

Thanks for this one, installed and working!

The pictures: https://i.postimg.cc/wMv9SDyQ/Main-Off-23.png, https://i.postimg.cc/nrPnZMqb/Main-Off-24.png, https://i.postimg.cc/T27dnNF7/Main-Off-25.png, https://i.postimg.cc/ncXH2YtH/Main-Off-26.png,
https://i.postimg.cc/Pr0dRpt1/Main-Off-27.png

Not good but it's really difficult to make with that broken Camera LCD! If you need more, please let me know.

Thanks a lot. Cheers.

Please put all images in a zip, thanks.

Oops! Just after restarting that machine again into the BIOS, I saw that the Video Memory in Main Menue is gone fully. In the same Menue, now are CPU Type: [Not Detected], System Bus Speed: 667 MHz, System Memory Speed: 667 MHz, all 3 blacked out.
Advanced Menue had a lot changed now too!
In Security Menu: EVERYTHING is blacked out, could even not set any password!
In Power Menue: except for CPU Control, everything is the same (normal).
In Boot Menu: same new entrees.

All that is looking very good and easier to use.

Thanks a lot. If you need more pictures, please let me know.

Thanks a lot. Cheers.
-----------------------

Zitat von Lost_N_BIOS im Beitrag #25

---

Please put all images in a zip, thanks.

---

@Quaxth - Please use edit feature to add more to your post if no one has replied yet, don't make a bunch of posts in a row, thanks
You'll have to show me about "Video memory" I did edit it again, instead of using last edit over, maybe I was off one byte I will fix.
But yes, you should see CPU info etc above, this is part of what I wanted to see, if info was shown properly or not. They are supposed to be blacked out, this is informational showing item only.
If it's not proper, then I will hide back, such as CPU none detected, that's not right, so I probably will hide all again
Please show me one image of CPU-z main tab, and then one showing "memory" tab, you can open two instances side by side, that way you only need to take one screenshot.
If you do not want to install, use the "Zip" package - https://www.cpuid.com/softwares/cpu-z.html

No, but thanks, I don't need account or anything at postimage, if I used anything like that it's usually imgur.com
But I don't need it to view your images, or to share mine, so not something I need

Security menu, I have not touched, that's how it is on stock BIOS. I only edited so far, the things I asked you, nothing else, so no need to look at anything else * Edit - sorry, I forgot I did boot already
OK, thanks for the images, I will let you know if I need anything else

* Edit - Thanks, these images told me what I needed to know for now! Except I need to see the CPU-z images I asked about above
If Bus speed and memory speed are correct, I still may remove all that, since CPU type is not detected properly, these are all tied into one combo suppression item.
I could maybe hide one but not the others, but I don't want to risk that kind of edit on this BIOS without you having programmer in hand, backup made, and are ready to recover in case it bricks.

* Edit - I see what happened on the video, well at least the hidden one. Not sure why the original one disappeared, but I will put them both back now
* Edit - @Quaxth - Here, please test and confirm, both video back to normal now?
http://s000.tinyupload.com/index.php?fil...636601242981629

OK, pictures uploaded as 7z here: http://s000.tinyupload.com/index.php?fil...257627256254674

That is 2 about CPU-Z (EM350_1/2) and 4 about the menus (Main=1, Advanced/Video Configuration=2, Security=1)

For Video it could just as it is now, no need to change again! About the Security Menu, It must be possible to set at least the Supervisor Password, better would be all!

I hope that's what you need?!

Thanks a lot, Cheers.

Thanks for the images, I will check. I will put video back how it was when I first changed it for you, if it's not now (That is the desired goal)
Security I have not touched yet, I will make it all available to you But, trust me, you do not want to set a BIOS password, it's only asking for trouble down the road!

OK, I checked the images, I see FBS 667, and memory speed 667 too, so at least those are correct. Do you want me to leave that in the BIOS main page at top, or remove it all, since CPU detection isn't working correctly?
And, I see video is still not back to proper!! I'll put it back to that first way I edited first time, and remove this detection (maybe this is causing the issue, not sure, and you'd have to test 2-3 more BIOS for us to find out)
Here, please show me BIOS Main image again now, so I can see what video looks like, if you can see both again - This has nothing to do with video anywhere except "Main"
http://s000.tinyupload.com/index.php?fil...289484884471267

But, as you can see now, in that Advanced >> Video, you can change DVMT size, this is the dedicated video memory you wanted, more-so than the 1/8MB thing.
On this, can you set 384 as max now, or only 256? If only 256, I will change

Thanks for that info and suggestion.

I'm downloading and testing the latest BIOS now! All seem to be working fine again!

Regarding the Security Menue: on original all was able to set for Supervisor and User, HDD was frozen. Power On Password was disabled and that's ok! And so it should be back! In this latest BIOS, #7, Supervisor, and IDE0 Hdd Password could be set, while User Password is blacked out. That could be OK, just the IDE0 HDD Password should be frozen. The reason for being able to set some password is easy: think about who's using that machine in General: Kids! And Kids like playing with things around! So the Bios should be protected!

Regarding the Video Ram: the CPU and the Video Chipset can work with up to 256MB, which means 384MB will anyway not work! Leave it to 128MB and 256MB, please.

Ok, that's for now!

Thanks again and Cheers.