Forum - RE: [Guide] Integration of drivers into a Win7/8/10 image

#136 | RE: [Guide] Integration of drivers into a Win7/8/10 image datum

Fri Jun 23, 2017 2:42 pm (Last edited: Fri Jun 23, 2017 2:44 pm)

Zitat von Avatar-Lion im Beitrag #747
When you try to add NVME driver is popping up the error list, and he (center) does not appear.
http://www.pixic.ru/i/S04134e0I7D520Q6.png

On the right hand side the NTLite GUI shows the hardware of your currently used host machine (the computer, which is currently doing the NTLite processing task).
This list is completely irrelevant for you, because you want to integrate a driver for an Intel NVMe Controller, which is obviously not present within your used host machine.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#137 | RE: [Guide] Integration of drivers into a Win7/8/10 image datum

Fri Jun 23, 2017 2:48 pm

Fernando
And? How do I install Windows 7 on the SSD?

reply

#138 | RE: [Guide] Integration of drivers into a Win7/8/10 image datum

Fri Jun 23, 2017 2:54 pm

@tistou77:
@Avatar-Lion:
Since our discussion about how to successfully integrate a mod+signed NVMe driver into a Win7 image by using NTLite has not much to do with the topic "Recommended AHCI/RAID and NVMe Drivers", I have moved your posts into this thread.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#139 | RE: [Guide] Integration of drivers into a Win7/8/10 image datum

Fri Jun 23, 2017 2:58 pm (Last edited: Fri Jun 23, 2017 3:05 pm)

Zitat von Fernando im Beitrag #138
Since our discussion about how to successfully integrate a mod+signed NVMe driver into a Win7 image by using NTLite has not much to do with the topic "Recommended AHCI/RAID and NVMe Drivers", I have moved your posts into this thread.

OK.
I tried to specify the path to your driver through the Browse, but the installer wrote about missing digital signature.

reply

#140 | RE: [Guide] Integration of drivers into a Win7/8/10 image datum

Fri Jun 23, 2017 2:58 pm (Last edited: Fri Jun 23, 2017 3:04 pm)

Zitat von Avatar-Lion im Beitrag #137
How do I install Windows 7 on the SSD?

By integration of the related mod+signed NVMe driver into the Win7 image according the start post of this thread.
Don't load any NTLite preset of a previously done customization and don't care about the hardware list, which is shown on the right side of the NTLite GUI.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#141 | RE: [Guide] Integration of drivers into a Win7/8/10 image datum

Fri Jun 23, 2017 3:02 pm

Zitat von Avatar-Lion im Beitrag #139
I tried to specify the path to your driver through the Browse, but the installer wrote about missing digital signature.

Win7 Setup only accepts WHQL certified drivers, if you try to load them at the beginning of the OS installation procedure.
That is why I gave you the advice to integrate the driver into the Win7 image by using a tool like NTLite.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#142 | RE: [Guide] Integration of drivers into a Win7/8/10 image datum

Fri Jun 23, 2017 3:06 pm (Last edited: Fri Jun 23, 2017 3:10 pm)

Please integrate yourself NVMe driver and USB 3.0 driver to boot.wim (Win7 x64) and send it to me. I believe this will eliminate the possibility of my mistake. If your boot.wim, the installer will refuse to see the SSD so your modified driver is not suitable for him.

M/B: MSI B250M PRO-VDH

reply

#143 | RE: [Guide] Integration of drivers into a Win7/8/10 image datum

Fri Jun 23, 2017 4:26 pm

Zitat von Avatar-Lion im Beitrag #142
Please integrate yourself NVMe driver and USB 3.0 driver to boot.wim (Win7 x64) and send it to me.

No, my friend, this not my task and I will not do that.
Nobody has forced you or any other user
a) to buy an Intel NVMe SSD, which is natively not supported by any available Intel NVMe driver, and
b) to install a Windows OS, which natively doesn't support NVMe at all.
If you should not suucceed by following my guide (note: you have to integrate the mod+signed driver into the BOOT.WIM and additionally into the INSTALL.WIM), I recommend to contact the Intel and/or Microsoft Support and ask for help. It is not my task to compensate their deficiencies.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#144 | RE: [Guide] Integration of drivers into a Win7/8/10 image datum

Sat Jun 24, 2017 1:56 pm (Last edited: Sat Jun 24, 2017 1:58 pm)

I understood what's the matter. NTLite does not work properly with boot.wim, resulting in a standard NVMe driver from Microsoft not working. If I do everything manually (for example, I used this instruction from the HP website and took the original boot.wim), then the SSD becomes visible. True, you can see that only through Shift + F10 > DiskPart > List Disk, because through the GUI, it does not reach the selection of the partition for installation (it breaks off on the standard message about driver shortage, I suspect that the matter is in the absence of the required USB driver... Although the USB drive through the Browse is visible... Hmm...).

reply

#145 | RE: [Guide] Integration of drivers into a Win7/8/10 image datum

Sat Jun 24, 2017 4:23 pm

Zitat von Avatar-Lion im Beitrag #144
NTLite does not work properly with boot.wim, resulting in a standard NVMe driver from Microsoft not working.

This is simply not true.
NTLite works properly with an untouched BOOT.WIM image. Since Win7 natively doesn't contain any NVMe driver, NTLite cannot make such driver unusable.
If you have integrated the MS NVMe driver via MS Hotfix into the Win7 BOOT.WIM image, you should not additionally integrate or load any other NVMe driver.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#146 | RE: [Guide] Integration of drivers into a Win7/8/10 image datum

Wed Aug 23, 2017 5:08 am (Last edited: Wed Aug 23, 2017 6:19 am)

http://imgur.com/a/uxlQO

I'm using NTLite version 1.4.0.5525 64-bit, and am working on an image I created in 2015. I uninstalled a previous version of nLite and discarded the excutable. I then found that the feature to remove drivers no longer wanted was removed. Since I have already removed some MS drivers I guess putting 2 drivers for the USB extensible drivers won't cause an issue considering their size. However as in the screenshot I seem unable to remove hotfixes already applied. Since I will be integrating the unofficial sp2 rollup into this slipstream have you got an advice? I have also an untouched ISO of win 7 SP1 64 bit ultimate. If I used that would my integrated updated drivers be installed over the MS defaults?

@EmmaRoyd: Done : https://www.ntlite.com/discussions/#/dis...64bit-ult-image

My Specs:
3900x, Gigabyte X570 Aorus Elite, 32Gb Patriot Viper Steel 4400 bdie 3600MT/s C16 (atm), Sapphire RX Vega 56 + Asetek 570LX AIO, Xonar DX, Samsung C24FG73 (1920x1080 144Hz), Samsung 850 Evo& 860 Evo, 4 x 14TB WD140EMFZ attempted raid 10, SH-S203B DL DVD/rw, Corsair HX850, Lian-Li 011dynamic XL, Razer deathadderv2, G15 & Wolfking Keyboard, Sandisk Extreme USB 3.0, 100Gb/10Mb Virgin Media, Windows 10 2004

reply

#147 | RE: [Guide] Integration of AHCI/RAID drivers into a Win7/8/10 image datum

Wed Aug 23, 2017 6:06 am (Last edited: Wed Aug 23, 2017 6:08 am)

megatron, as this is an NTLite question, i kindly ask if you can post on the NTLite forum where Nuhi, myself, or other forum members will happily answer any questions you have over and above basic driver integration. :)

reply

#148 | RE: [Guide] Integration of AHCI/RAID drivers into a Win7/8/10 image datum

Sat Sep 02, 2017 6:31 pm

@ all:
Due to some minor changes regarding the NTLite processing, which were introduced with the NTLite v1.4, I have updated today the start post of this thread.

Update of the Start Post
Changelog:

Updated: parts of the guide
New: all inserted screenshots

Good luck with the revised guide!
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#149 | RE: [Guide] Integration of drivers into a Win7/8/10 image datum

Mon Nov 13, 2017 6:25 am

good

reply

#150 | RE: [Guide] Integration of drivers into a Win7/8/10 image datum

Mon Nov 13, 2017 10:13 am

@IceCreamSandwich:
Welcome to the Win-RAID Forum!
Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

Please enter a reason for warning.