@diderius6

would you mind sharing your SSDT tables at least?

also, I've never used windbg before, so I would need help to learn to use it.

Has this Threadripper board a COM connector?
If not, the new debug methode via Lan or USB from @Mov AX, 0xDEAD can help.
And you need a second compi.
Not all Lan ports work with this methode but most USB.
Download all the needed files from Git, where Move post them. I tested them, work.
And you need a second compi
Dietmar

@diderius6

It has debug LEDs, but I don't see anything like a COM port anywhere on the diagram.

The 2 NICs are 2.5gb Intel variants, I hope that's not an issue.
^
my mistake, they are just regular 1 gigabit

@infuscomus
Which name have the Lan ports, because not all are supported.
And which name have the Lan ports on the second compi?
Dietmar

PS: And may be, that @Mov AX, 0xDEAD can help us with Lan, with port that is not official supported.

@diderius6

The gigabyte website says these are i210at Ethernet controllers.

@infuscomus
May be, that they work, because XP has drivers for them. The i219 work not, I tried.
And I remember, that you also can use a lan card, connected to an Pci-e slot,
so debug session should work in any case
Dietmar

Zitat von diderius6 im Beitrag #36

---

you also can use a lan card, connected to an Pci-e slot

---

Now you need another compi,
from where we do all.
For lan debug you can put XP SP3 on this other compi too,
works
Dietmar

@diderius6

I have my AB350 Ryzen system with XP on it that I can use.

also, Can I see your SSDT tables?

"Can I see your SSDT tables"
For this I need to build up everything on my Ryzen system.
And I have the same system as you,
so not so much sense
Dietmar

@diderius6

do you still have your x570 system?

@infuscomus

Yes, but I dont like at all, because it is unstable as much as possible,
brr..Build from Asus, quick and dirty. I asked Asus support and they answered to me,
that they do not have their own(!) Bios..
Dietmar

PS: My comment about this board, that for example nearly no Ram can work with it,
was deleted at https://geizhals.de..

@diderius6

I've had some problems with my gigabyte TRX40 designare - mainly pcie lane allocation, it still not perfect but al least all the slots work correctly now.

Gigabyte support have been helpful, but I would've preferred they catch these problems in their labs before release rather than me telling them about it.

Zitat von diderius6 im Beitrag #42

---

for example nearly no Ram can work with it

---

I have 2 of them,
first 99% bad
second 89%
Dietmar