@frankiekat i7-4790 3.6GHz should be vpro capable (if it's not the 'K' version- but since you wrote 3.6GHz...)

Post bios and/or me region you created?

@lfb6 as a new user to this forum it is unfortunately not allowing me to post external links yet. I can try again next week... :/

It's BIOS version A25 and used the 9.1.45.3000_5MB_PRD_RGN.bin as the Me Region replacement.

This particular 9020 has the sticker inside the case that says "3 ME Disabled". Is it still possible to enable AMT in this case?

Thanks!

fk

@frankiekat There are several threads in this forum that describe activating Dells with "3 ME Disabled"

For sharing files- mega.nz is often used, most mail providers offer to share files, shouldn't be a problem, normally.

@lfb6 I did upload to mega.nz, but the forum software/rules won't let a new registrant post external links in a message for the first 7 days (understandable I suppose). That said, the (short) link is `tinyurl.com slash y65y5n6q`.

I'll do some more searching for the other threads for "3 ME Disabled".

Thanks,

fk

@frankiekat Which settnigs did you change? In your dump AMT is effectively disabled- see pictures comparing a 9.1 ME with working AMT (on top) and your dump at the bottom.

pic 1 - Service advertisement ..... Don't think it's relevant, but this might be bios dependant, should leave it unchanged.
pic 1 - Manageability application enable/ disable is greyed out, but becomes active when enabling AMT
pic 2 - AMT idle timeout is the time AMT waits until it goes to sleep when machine/ OS entering S* sleep.

@lfb6 yes, that finally did the trick. I must have somehow missed changing those "Featured Supported" in the instructions, but doing that did finally restore the MBEx functionality. I had to re-flash the BIOS with the OEM because something went wrong and it was giving me an "Vesa unsupported video card" error, but after that it seems to be working fine.

Thank you for all of the tips and help!

fk

Nice! Glad it worked