Okay I bought this, is this fine for our rescue? https://articulo.mercadolibre.cl/MLC-529...p-adaptador-_JM

Do I need a chip?

If you don't understand something just tell me.

@Lost_N_BIOS

@Upgrader001 - Yes, that kit contains everything you need No, you do not need chip, you will connect to the one on the board, dump it, send to me, then I will fix, then you program it back
What is the BIOS chip ID? Look with your eyes, do not rely on any old software image that may have mentioned a BIOS chip ID.

@Lost_N_BIOS

pictures about my motherboard
i cant find a battery, now the computer is totally dissamsembled.
i bought aonther bios programmer that comes the 15 of september.
NOW the question is..... where is the bios? i have found 4 suspects
https://imgur.com/a/3kjkdXW
https://imgur.com/gallery/bVTRL6q

Please put all images in a zip, thanks. Then I can check for you

Zitat von Lost_N_BIOS im Beitrag #34

---

Please put all images in a zip, thanks. Then I can check for you

---

Your WTF is this circled in the image is the SouthBrige/PCH chip SR40B = HM370

The BIOS is the GD25B127D chip (Gigadevice 25B127DSIG). For this chip, use 1.18 software with chip ID GD25Q128 - http://s000.tinyupload.com/index.php?fil...213094641136166
Or use Flashrom - Here is GUI version - (post 510) - [Guide] Using CH341A-based programmer to flash SPI EEPROM (34)
And here is Linux/Ubuntu Method - [GUIDE] The Beginners Guide to Using a CH341A SPI Programmer/Flasher (With Pictures!)

Here is guide to use with programmer once it arrives - [GUIDE] Flash BIOS with CH341A programmer
DO NOT erase or write to chip, until you've dumped BIOS and I've checked it and replied back. Do read, verify and saves only. Also don't use "Auto" in the CH341A software

@Lost_N_BIOS
OK i installled the driver and i putted the test clip, readed, verified and saved the bios http://www.mediafire.com/file/xpplkrqks6...x9+BIOS.7z/file
i'm waiting your orders

@Lost_N_BIOS
are you checking the bios or i have to go walk alone from this stage?

@Upgrader001 - Here, program back by this method >> Open app, click detect and choose ID GD25Q128, erase, then blank check, then open BIOS file, then write, then verify.
Once done, remove main battery, CMOS battery if there is one, remove main power cable. Then connect the power on button cable, and press and hold the power on button for 10-15 seconds. Then let sit for one minute without power
Then put all back together and boot to BIOS, load optimized defaults, save and reboot back to BIOS, then make all other changes you want.
http://s000.tinyupload.com/index.php?fil...910349168618304

@Lost_N_BIOS
i can't write i cant found the botton. How can i do this in the 1.18 version of this program?

@Upgrader001 - "Write" button is the "Program" button, directly above 08h offset column, after "Read" and before "Verify"

Bios repaired. Mission accomplished. Thank you again.

@Lost_N_BIOS
hi i need your help again i bricked the laptop again. It's a similar reason, i introduced a invalid value in the bios, now it's bricked. Same laptop.

please help me

Hi friend, let me know and i will help you, i am sorry , but Lost_N_BIOS isn't here form long time and we all are worried about him ...
You have a brick ?
Have you an CH341a programmer ?
I will wait your reply to help you friend ...
Regards

@BDMaster
hi BDMaster. That's a really bad and sad news about lost n bios.

yes i bricked
yes i have a ch341a programmer

thanks for your disposition