no i bought this computer to a particular person, but i know a computer with a power source of 230w that can run a i9-9980hk and a 2070 mobile. Anyways can you put an i9-9980hk, i9-11980HK tiger lake and i9-10980HK microcodes? is that posible? the chipsets are very similar, may be that can run. thanks for you patience and work.

@Upgrader001 - Your first comment does not make sense to me. But the second part of that, about the power supply, that does not matter and is unrelated to what I mentioned about power delivery system (I'm talking about VRM/power delivery components on the motherboard)
Yes, it's possible to put in Tiger Lake Microcodes, all you do is insert them But, no I will not do that as it's pointless, they will not work and that is a totally different CPU socket

Here is unlocked BIOS + 906ED inserted, change log included - https://ufile.io/vn9go54s
Flash it back via FPT using this command >> FPTw.exe -bios -f biosregNEWuCFCITCHKSetM1.bin
* You may need to rename it, unsure if FPT likes long names like that

*** WARNING - To ANYONE with laptop and unlocked BIOS!!!! ***
DO NOT try to enable this graphics card or disable that card, switch cards etc. Otherwise you will end up with no display output (ie black screen) and no way to recover except by blind flash or with flash programmer.
You can change graphics related settings, like changing memory sizes, or core speeds etc, just don't try to disable one card or change which is main etc.
Additionally, be very careful when trying to undervolt CPU, you can leave BIOS unbootable due to CPU voltage too low (Sometimes even 0.05 is too much)

*** WARNING *** - This BIOS is user specific! If you are not user Upgrader001 at Win-RAID.com forum, DO NOT USE THIS BIOS!!
If you do, and you are not Upgrader001, then you will loose your serial, UUID, OG NVRAM, and possibly LAN MAC ID as well.
You have been warned!!!

thank you so much. Just i have to re download intel me things because i formatted the computer.
@Lost_N_BIOS how is the step by step to flash the bios?
-------------

@Lost_N_BIOS what i did.... i renamed the bios to 1.bin then i went to \Intel CSME System Tools v12 r26\Flash Programming Tool\ and i opened WIN32 with a console as a admin and i puted FPTw.exe -bios -f 1.bin with the image inside the folder. Something its wrong or its all right?

@Upgrader001 - Please use edit instead of making multiple replies in a row, thanks
Looks good, reboot and all should be unlocked and BIOS ready for the other CPU

I'm back, thank you.

@Upgrader001 - You're welcome! So, all OK, and BIOS is unlocked etc? If yes, then you are ready for the CPU replacement

Hi people
Recently lost n bios modified my bios successful.
But stupid things I have made. I modified some parameters in the bios like uncore voltage and other one that I don't remember and my bios don't boot. I have the computer turn it on and off alone since I did this.

Please help me

- What did you change, try to remember If it was all voltage related, then you set something too low
Did you try to wait, after boot, and see if it finally loads windows in 1 minute or two?

You can try, remove main battery, remove PSU cable, press and hold case power on switch for one minute, then see if it starts after that (trying to clear CMOS)
If that fails, do the same, but open bottom and remove CMOS battery first. Then if that also fails, remove all memory and boot the board with zero memory installed, then put back only one stick and see if you can then boot into BIOS.

If you cannot get it, you will need CH341A + SOIC8 / SOP8 test clip with cable, to dump the BIOS, send to me, then I will make you new BIOS to program back in

* Edit - @Upgrader001 - Moved these posts back into the main thread for this board, no need for separate topic without any system info etc

I'm making some memory, I have been playing with the bios since you did the custom one. I touched max oc value or something like that and nothing happened. I touched core voltage to -5 mv and the disk didn't booted. But now I touched uncore voltage and the machine is on/off all the time.

@Upgrader001 - Probably due to CPU voltage too low, it's in my warning I gave you above
Try to fix/reset how I mentioned above, maybe you will get lucky and get it to reset to fail safe without having to order a flash programmer.

Ok

@Lost_N_BIOS
I have bought a bios programmer it will be here between 24 of Sept and 2 of October. do I need to teardown the laptop? To use the bios programmer?

@Upgrader001 - Sorry you could not get it reset without programmer Did you try leaving out all power, main battery, PSU cable, and remove CMOS Cable, for long time (24+ hours)?
Yes, you will need to at least take off the bottom of the casing, usually from there you can see the BIOS chip. If you cannot find, take image for me of what you see with the bottom removed and I will see if I can point out BIOS chip for you
Here is guide on how to use programmer -[GUIDE] Flash BIOS with CH341A programmer
And here is software package - http://s000.tinyupload.com/index.php?fil...213094641136166
Be sure you DO NOT erase or write to chip, until you've made a backup dump and someone checked it to be sure it's OK/Valid, that way you know your system specific info is preserved and can be put back into BIOS later as needed
Once you find chip, give me the chip ID and I will tell you what software/version may be best to use to read/write to the chip, if I know what works best.

Okay I'll try the 24 hours reset but I haven't removed cmos battery because it is in the reverse of the motherboard..I thought that bios programmer could solve the problem without disassembly the computer. Anyways, the computer doesn't read usb, with that in the way, is it going to work the bios programmer if the computer doesn't read usb pendrives and don't image(turned off screen black screen no lights)? @Lost_N_BIOS

@Upgrader001 - You HAVE to remove CMOS battery, or short it out, if you are trying to clear CMOS
Yes, programmer can fix all this without clearing CMOS, because we'd do that in BIOS rebuild. Clear CMOS and all stuff I mentioned was to try and help you get it to reset without having to use programmer
To use programmer, yes, you will need to take system apart, at very least remove bottom of case. And program is not ran on the problem system, it's only connected to the problem system via SOIC8 test clip cable connected to the BIOS chip.
You connect the USB programmer to another running computer, and all programming is done from there.

On CMOS battery, if you can't remove easily, you can try to short it all out, by remove PSU, and power cable, then sit something heavy on Power on button, and leave it there, so power on button is held down for 24+ hours
Sometimes that can clear the CMOS and drain the battery, sometimes. Sometimes the only way to clear CMOS or re-load defaults is by shorting a clear CMOS dot on the board, it will look like tiny gold circle but will have thin line through it.
Trying to start without memory, and then with only one memory module, can sometimes get fail safe defaults to load too. So try that as well.