@Lost_N_BIOS:
Morning, Ive got a Xiaomi Mi Gaming laptop 2nd gen (i7 8750h, HM370 A30D, gtx 1060m 6g), got pretty good HW for the price. The thing is that none of the software is up to date. Some Users are desperate about it PL1 and EDP even PL2 throttling all the time on load. (i myself just have pl1 at 45w on 28 seconds which is stock from bios(throtlestop cant change it even with "disable and lock power limits" but no pl1 anymore or thermal throttling cause i uv(ran 34.38-34.57 frequency on the 45w limit, on the past at a previous SW setup i was running 35.50-35.70 while pl1) I tried some ways like setting variants(setup_var) from opencore bootloaader environment, (in the proccess of fine tuning this laptop broke/corrupted many windows OS with sensitive data.) . modded vbios (UV+OC) on my gfx card 1060 6g and it runs great, i got stuck on the mb bios tho, eventually gave up afraid not to break anything(most shops here in greece dont even touch my laptop here as its not a very known device here and have never worked with it before).
Also i have an error many of the times lately when i boot into windows bd prochot triggers, i can use the cpu fine tho and even push it to its limits, not even frequency drops or benchmarks scores drop, (cinebench always fluctuates between 2780 and 2880 even with bd prochot on boot i manage to get the right scores), i just check and if it is enabled untick it on throttlestop on every boot to be sure, i even disabled it from there but doesnt seem to work. can it be a false positive? cause when i open hwinfo it shows bd prochot as a "no" value.(note i tried reinstalling windows 3 times even tried once with windows update drivers, still remains with throttlestop. I also reinstalled bios and cmos reset)

Zitat

---

@filippos96 - Not sure what you need here?? Do you mean you need unlocked BIOS menus? If yes, please do the following below, and with the biosreg.bin file also include the latest BIOS exe in same zip/rar, this is all I need for now.
Please upload to tinyupload.com or uploadfiles.io - thanks!

---

Where is biosreg.bin? Thanks in advance

Zitat von Lost_N_BIOS im Beitrag #1230

---

@MrCjxer - Yes, if you do not find SKTOCC to mod, and you do not connect pads properly, system will not start.
It will act/function in same way as it does it you start it without any CPU installed - test that, if you need to see how your board acts, they all do not act same, some run/start with no CPU, others wont

That is Asus board in second image, what is first image from? You can't use other brands or models, you have to find your exact model hard mod image for this.
Maybe some BioStar would be same/similar, but it would not be anything like Asus mod location. And yes, if you cannot solder, then SKTOCC mod may be harder for you than connect the pads on CPU.

@filippos96 - You didn't answer my question, same as I asked you last time, what do you need done there? If you need unlocked BIOS menu, then you need to follow the FPT guide I gave you at the original post and give me your BIOS region
Ohh, sorry! I see forgot to add the FPT copy/paste in that last post Sorry! You still need to answer me, what do you need?

If you have already modified the BIOS in ANY way, you will need to re-flash it back to factory defaults using factory method (NOT FPT)!!!
Additionally, please remove all BIOS passwords, disable secure boot, and disable TPM or Encryption if you have enabled. Do this before moving on to below

If you do not have Intel ME drivers installed, install them now from your system driver download page, then start over here after reboot.
Check your BIOS' main page and see if ME FW version is shown. If not then > DOWNLOAD HWINFO64 HERE <

Once HWINFO is open, look at the large window on the left side, expand motherboard, and find the ME area.
Inside that section is the ME Firmware version. Take note of the version. (ie. write it down or get a screenshot)

Once you have that, go to the thread linked below, and in the section "C.2" find and download the matching ME System Tools Package for your system.
(ie if ME FW version = 10.x get V10 package, if 9.0-9.1 get V9.1 package, if 9.5 or above get V9.5 package etc)
> DOWNLOAD " ME System Tools " packages HERE <

Once downloaded, inside you will find Flash Programming Tool folder, and then inside that a Windows or Win/Win32 folder (NOT x64).
Highlight that Win/Win32 folder, then hold shift and press right click. Choose "open command window here" (Not power shell! >> * See Registry file below *).

If you get an error, reply to this post with a screenshot of it, OR write down the EXACT command entered and the EXACT error given.

((If "open command window here" does not appear, look for the "Simple Registry Edit" below...))

Step #1
Now you should be at the command prompt.
You are going to BACKUP the factory un-modified firmware, so type the following command:
Command: " FPTw.exe -bios -d biosreg.bin "

>> Attach the saved "biosreg.bin ", placed into a compressed ZIP/RAR file, to your next post!!! <<

Step #2
Right after you do that, try to write back the BIOS Region dump and see if you get any error(s).
Command: " FPTw.exe -bios -f biosreg.bin "
^^ This step is important! Don't forget! ^^

If you get an error, reply to this post with a screenshot of it, OR write down the EXACT command entered and the EXACT error given.

Here is a SIMPLE REGISTRY EDIT that adds "Open command window here as Administrator" to the right click menu, instead of Power Shell
Double-click downloaded file to install. Reboot after install may be required
> CLICK HERE TO DOWNLOAD CMD PROMPT REGISTRY ENTRY <

If the windows method above does NOT work for you...
Then you may have to copy all contents from the Flash Programming Tool \ DOS folder to the root of a Bootable USB disk and do the dump from DOS
( DOS command: " FPT.exe -bios -d biosreg.bin " )

---

Zitat von Lost_N_BIOS im Beitrag [TOOL] Easy automated Mod tool for Coffee Lake bios

---

@filippos96 - doubt that, did you check, it may just need replaced?!?!
Bclk is ME FW controlled, unless your BIOS has option to adjust it, if so then maybe you caNo CMOS? I n get close to 100, but it's generally fluctuating a bit in modern systems.
Your posting here is a confusing, ongoing mess, this is Coffee Mod BIOS thread, do you need Coffee Mod AND unlocked menus?
If you need Coffee mod, tell me your old CPU model and your new CPU SSPEC off top of CPU.

Sorry, that image you linked, I have no idea what you're showing me that for?
If you need some defaults changed also, please give me exact name of settings and what you want them set to, in a list not an image.

---

Zitat von Lost_N_BIOS im Beitrag #4

---

@filippos96 - Yes, I understood what that image was, but it's a mess, and does not clearly show me what you want changed and it's name etc. Please make a text list as I mentioned, exact setting name from IFR + what you want it changed to as default.
Did you open system up, look at both sides of the board, to confirm these is no CMOS battery? If not, then you can't be sure, and probably is one but dead. But yeah, no worries, we can change defaults
Why are you posting in Coffee Mod BIOS thread if you do not need Coffee Mod BIOS? You should have made your own thread, please do that now and I will move our posts to your thread.
I can't do it myself right now, because I don't even know what board you have, since your in wrong thread and model is not in title etc

---

@filippos96 - Yes, I understood what that image was, but it's a mess, and does not clearly show me what you want changed and it's name etc. Please make a text list as I mentioned, exact setting name from IFR + what you want it changed to as default.
Did you open system up, look at both sides of the board, to confirm these is no CMOS battery? If not, then you can't be sure, and probably is one but dead. But yeah, no worries, we can change defaults
Why are you posting in Coffee Mod BIOS thread if you do not need Coffee Mod BIOS? You should have made your own thread, please do that now and I will move our posts to your thread.
I can't do it myself right now, because I don't even know what board you have, since your in wrong thread and model is not in title etc

(Thanks for moving my posts in this thread mods)

EDIT by Fernando: Thread title shortened and personal address moved into the start post (to save space)

@filippos96 - Merged/moved ect - now, please cleanup post one, or copy last post to post one, so it's not so confusing looking
Then make a list of the changes you want as I asked, thanks

so i just need you to change the default variant bit values on BIOS with this https://raw.githubusercontent.com/johnny...iaomiValues.png , unlock advanced menus, i want you to update ME FW inside the bios if possible , i want to have the option from thee BIOS to OC BCLK and OC Ram(should be in the advanced menus anyways) and update microcode inside bios
here is also the cpu-z validator link https://valid.x86.fr/k8jiwk

again, Here is the bios.reg bin, the exe of my bios and an error that i got when flashing bin with admin cmd, i think related to variant locks from bios. https://tinyurl.com/y4vkcrb7
thanks in advance