Hello!
I would like to request a mod for motherboard Gigabyte 970A-D3p for use MVNe pci-e card :)
If possible, unlock more features :D

@javieracdc - What is your board revision? Look in bottom left corner of PCB.
I did rev 2.0 latest BIOS with NVME Mod here [OFFER] Gigabyte GA-970A-DS3P rev2.x BIOS Mod NVME Added (4)

If you have Rev. 1.0 board, I will have to make you new BIOS, what version do you want used?

If you want stuff unlocked, you need to give me a zip of ALL pages of your BIOS, all menus at root level, all submenus inside, all settings inside all menus - So I can see every single setting/page
If you do this, you can F12 screenshot to USB, then please put in MAX compressed zip.

Zitat von Lost_N_BIOS im Beitrag #2

---

@javieracdc - What is your board revision? Look in bottom left corner of PCB.
I did rev 2.0 latest BIOS with NVME Mod here [OFFER] Gigabyte GA-970A-DS3P rev2.x BIOS Mod NVME Added (4)

If you have Rev. 1.0 board, I will have to make you new BIOS, what version do you want used?

If you want stuff unlocked, you need to give me a zip of ALL pages of your BIOS, all menus at root level, all submenus inside, all settings inside all menus - So I can see every single setting/page
If you do this, you can F12 screenshot to USB, then please put in MAX compressed zip.

---

@javieracdc - Thanks for the images! OK, yes, I will do NVME mod for Rev. 1.0 board and do the unlock hidden settings for you (usually not many hidden in Gigabyte BIOS)
Yes, you will be able to boot off NVME on PCIE adapter once you flash in mod BIOS
BIOS will be posted here soon!

* Edit - Wait, do you want me to do F5, or latest F6f (Suggested)?

Hello I prefer F6f :)

@javieracdc - Thanks - Missing image >> Advanced CPU Core Features

Zitat von Lost_N_BIOS im Beitrag #6

---

@javieracdc - Thanks - Missing image >> Advanced CPU Core Features

---

@javieracdc - Thanks for follow-up image, nothing hidden in there anyway - Here you go, flash via Qflash - http://s000.tinyupload.com/index.php?fil...149974438043082
Once done, boot to BIOS, load optimized defaults, save and apply, then reboot back to BIOS and shut down
Then follow step #4 of this guide in the "This is what you should do" section - [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS

Thanks so much! Worked fine flashing
At the moment I don't have any NVMe disk to test but I will get one soon :)

@javieracdc - You're welcome and thanks for quick test and confirmation back! Can you see some new settings in BIOS too? If not, let me know and I will do further edit on top of the one I did (it should get them though)
There was not many to reveal, only maybe 5-6 items. If you need me to list them out let me know, so you can check to confirm

* Edit - Actually, here I checked and made list for you, these are what I intended to be made visible, if they are not then let me know and I will send follow-up edit >>
Advanced Frequency Settings >> BCLK Clock Evaluation
BIOS Features >> Setup Prompt Timeout
BIOS Features >> Display Boot Option Control
Peripherals >> USB Mass Storage Driver Support
Power Management >> ACPI Sleep State

Thanks, those option is showed

Might you explain what is the meaning of Setup Prompt Timeout?

@javieracdc - Thanks for confirmation! Setup Prompt Timeout = Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting.
This means if you set some amount, say 20 seconds, at startup the POST Screen will wait 20 additional seconds to allow for you to hit the Enter BIOS key or not, before it hands over the BIOS to the OS and windows starts to load.

Zitat von Lost_N_BIOS im Beitrag #12

---

@javieracdc - Thanks for confirmation! Setup Prompt Timeout = Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting.
This means if you set some amount, say 20 seconds, at startup the POST Screen will wait 20 additional seconds to allow for you to hit the Enter BIOS key or not, before it hands over the BIOS to the OS and windows starts to load.

---

@javieracdc - You're welcome! Yes, but flashing mod BIOS is sometimes an issue there.
Please make threads for those systems you need edited, in each one add stock BIOS download page (not link to BIOS). Also, please show an image of the exact error you see on screen when you try a card that is blocked.
Do you have flash programmer, like CH341A or other? If yes, remind me of that in those threads, if not, then let me know that too

Zitat von Lost_N_BIOS im Beitrag #14

---

@javieracdc - You're welcome! Yes, but flashing mod BIOS is sometimes an issue there.
Please make threads for those systems you need edited, in each one add stock BIOS download page (not link to BIOS). Also, please show an image of the exact error you see on screen when you try a card that is blocked.
Do you have flash programmer, like CH341A or other? If yes, remind me of that in those threads, if not, then let me know that too

---