@javieracdc - That's a graphics issue, not BIOS. Dead/dying graphics card, or graphics chip inside CPU if you are using onboard graphics, or maybe loose/bad cable etc, something graphics related though
Put in another graphics card and then it should be OK. Then check out graphics card on another system

Zitat von Lost_N_BIOS im Beitrag #16

---

@javieracdc - That's a graphics issue, not BIOS. Dead/dying graphics card, or graphics chip inside CPU if you are using onboard graphics, or maybe loose/bad cable etc, something graphics related though
Put in another graphics card and then it should be OK. Then check out graphics card on another system

---

Hi,

I have a GA-970A-D3P Rev 2 and am after BIOS mod to version FD for NVMe boot functionality.

I note the BIOS mod mentioned earlier in this thread by @Lost_N_BIOS is for the DS3P board, not the D3P like the poster was asking (and which I'm after).

I tried that modded BIOS file anyway, and sure enough Qflash gives an ID check error which isn't surprising as the MBs are quite different (DS3P has Crossfire, different IO, different RAM types supported etc).

Attached is my BIOS (version FD) which loads and unloads ok. Is there a NVMe mod for this available?

thanks

@80s_hackster - See post #2, follow link (to post #54) on other thread
The link is for DS3P thread, but that thread has many variants posted in it, including the D3P Rev 2 at the link I provided in post #2 here
BIOS file extension may need fixed, if the file I uploaded matches what I have in folder (ROM), rename back to .FD if Qflash does not accept it << If this happens, let me know and I will re-up that file to fix this for next person grabbing it

Thanks @Lost_N_BIOS that worked first time :-)

@80s_hackster - You're welcome! So, did you have to rename the extension on that file, or was it OK as .rom?

@80s_hackster I change the file name and it worked. I didn't try it with the .rom extension.

Zitat von Lost_N_BIOS im Beitrag #21

---

@80s_hackster

---

@80s_hackster - Thanks!
I think I will go ahead and fix that now, and reup, in case anyone in the future runs into issue with .rom and has file extensions view disabled so can't see what's going on.

help me for bios f6f 970A-d3p v1.0 mod m.2 nvme, pls

@hbllne

Very easy mod, follow the links and present ur final work, someone can check later if the mod OK and help.

[HowTo] Get full NVMe support for all Systems with an AMI UEFI BIOS

[Guide] How to flash a modded AMI UEFI BIOS

Before any flash with mod files, the system should already be with the same version of the bios file that will be mod.
As usually, not the mod itself but the flash operation of the mod, envolves some risks that only u decide it, whenever possible a software backup of the entire SPI bios is advisable, preferably if possible a backup with a CHA programmer is the best and most reliable.

mod for me, pls ? i do it (h.t.t.p.s://w.w.w.win-raid.com/t871f50-HowTo-Get...-UEFI-BIOS.html) but when boot pc nothing happened. NVME not detect in bios and windows like not yet mod. it's my moded bios, Thanks for your help

Ur mod file is OK.
Now follow the procedure explained in the guide for OS install and boot from the new NVme drive.

can you reupload please f6f?

Previous post...wots the problem?

EDIT: Blind? Thats the mod in post #26...

just wanted modded f6f bios for my motherboard to add nvme support