@adeveloper79 - Great to hear FDM1 works as well, it's better anyway due to less edits done, I only made FDM2 just in case FDM1 did not get it.
Can you see >> Advanced >> Overclock Performance Menu? If yes, inside it, can you see AND change the option "OverClocking Feature" or is that grayed out? If that is missing, or grayed out, then one more edit is needed

So, here's how to do that exact edit from FDM1 - You need hex editor + UEFITool version 25.0 (don't user newer)

1. open BIOS in UEFITool
2. Search >> GUID >> FE3542FE-C1D3-4EF8-657C-8048606FF670
3. Expand FE3542FE-C1D3-4EF8-657C-8048606FF670 / DriverSameplDXE / SetupUtility (aka "Setup")
4. Select PE32, right click, choose "Extract Body"
5. Open PE32 body in hex editor >> Edit at offsets shown below
90B: >> 70 >> Change to >> 00
943: >> 38 >> Change to >> 00
97A: >> 75 >> Change to >> EB (JNZ >> JMP)

6. Save modified setup P32 body
7. In UEFITool, select setup PE32 body again same as step #4, right click, choose "replace body" and browse to your modified setup file and select it as replacement.
8. Go to File >> Save Image As >> modfilename.bin

Done

And, here is what that edit looks like in assembly, which is how we find this to do the actual hex edit >>

Overclocking feature isnt greyed out on both mods

Thank You for explaining too

@adeveloper79 - Great to hear Overclocking Feature is already ungrayed, nice!
And you're welcome, it may or may not be same on next BIOS version, if it looks exactly the same then it probably is but if any digit is not same then I'll have to check it for you to be sure.

Thanks :D <3

Is it okay to have some options doing nothing like numlock state while booting and some having no info like in oc<memory it shows values of latencies and infos as 000000

and is it possible to add some options from other bios with same insyde and laptop lineup like in 8th gen of predator they have an option in bios to turn off keyboard backlight after sometime while being plugged to AC which my 7th gen doesnt have it only goes off if on battery

Sorry if i asked in wrong sub forum

@adeveloper79 - Sorry, but I'm not quite sure what your first questions are in regards to (numlock button, or some setting), show me what you are looking at/talking about on memory
If numlock setting, that is to have it enabled, or disabled at/during boot (ie DOS/BIOS).
On the memory, if you're talking about grayed out / Info at the top of memory section (Default, Custom, XMP1/XMP2), this is normal if your memory does not have XMP profiles, but you'd have to show me what you see to be sure
Remember, this should be hidden by design, so they may not have it all configured correctly. But, I think once you set Default or Custom stuff instead of auto, that may auto-update those sections info.
If that does not happen, there is one thing I see we can try to change and see if it allows this info to fill properly.

As for adding options, no, that's not possible, only can reveal what is there already. If some stuff is still missing, which there may be, we can further reveal >> Here, scroll through this vs what you see in BIOS, if anything catches your eye that you want and don't see let me know

These i meant for the numlock option

That numlock should enable/disable the numlock key at bootup periods, such as in BIOS or DOS (enable/disable by default)
The memory stuff, that does not look correct, however I can't be sure, since you have set custom but not applied any settings yet. Set some of that and reboot, does it show on top then, or still all 0000?
Does your memory have XMP? If you are not sure, look with HWINFO64, in large window, on left choose memory, then select a module, and on the right side scroll down and see if you see any XMP profiles.
You can also see this on the smaller CPU-z like window that first comes up when you open in too, on the right will be memory timings box, scroll down and see if you see XMP in the "ext" column

However, both may be acting funky due to what I mentioned I could possibly change. Here is two BIOS with that removed if you want to test, in order this time
http://s000.tinyupload.com/index.php?fil...094878561538876

Question, when you set custom memory speed/timings, do they apply and show up as properly changed in CPU-z memory tab?

Yea that numlock i enabled it but it doesnt do its work
About memory after reboot its same as 0000
XMP i think my memory doesnt have xmps
i used auto memory options by just selecting freq in my PC and later change CS latency to make it stable so thought this will be same in laptop my bad
no i havent tried manually setting i tried the Ratio option and changed it which bricked it hehe and i had to reflash the bios lel
i will try the provided bios in some hours and let you know the results
-------------------
Flashed a and b
'a' and 'b' both boots
'a' works good and have all same options and tabs
'b' when switching tab it just hangs up

Then it must be BIOS bug, about numlock, only Acer can fix that.

Don't "guess" about XMP, check, I showed you how Sorry, your explaination of memory setting stuff is not very clear, you said you use auto then later set CS etc, sounds manual, so very confusing.
Set memory speed, timings, etc, all manually in BIOS, then reboot and check top info area. If it all still remains 0000's, then we can hide that if it bothers you.

Also, check to confirm what speed you set in BIOS is speed you get in windows, check that with CPU-z software, in the memory tab (what speed you see needs x2 to be actual speed - if you see 1200 this = 2400 for example)
Thanks for info on BIOS test A-B, but you did not mention any results of testing things I mentioned above, or any comments on what we're discussing trying to fix here (in relation to BIOS A, since B hangs)

My bad i wasnt able to write it correctly about XMP i meant i dont see XMP info on CPUZ not hwinfo Really Sorry
on the memory update if i set custom it wont POST :V i think i need to dig up and read about timings and all to correctly set them

Its okay i wont use those lol till i learn about memory OC correctly

Sorry if i am bugging you :D

@adeveloper79 - Sometimes If too many profiles, CPU-z wont show, but if it's there you will see in HWINFO64 if there is any. Even if no XMP, there will be default SPD profiles at least, in CPU-z and HWINFO64.
Yes, to set custom you would need to know how to set speed, which multiplier for what Ref Clock (100/133), timings should be OK on auto.
Show me image of CPU-z SPD tab with one stick selected, then I can tell you what to set Also, show me image of CPU-z Memory tab selected too, so I can see what default/auto is setting for you now.

It's no bother at all, trying to help you

OK, thanks! Current memory speed/timings are >> 2400Mhz >> CAS 17-17-17-39 @ 2T
That kit may have XMP, are you sure you checked both ways fully with HWINFO64?
If you are not sure, please send me report from HWINFO64, do this so it's memory only >> Report >> Create Report >> Textfile >> Select all, then de-select all >> Then select Memory box only and click finish, then send me the txt file.

For setting speed/timings same as current you would set the following
Memory Reference Clock - 133
Memory Ratio - 9

Or
Memory Reference Clock - 100
Memory Ratio - 12

Qclk Odd ratio may need to be set enabled, to select either one of those combos above, not sure - If you try 133 and don't see 9 as option, or 100 and don't see 12 as option, then enable Qclk odd ratio first and reboot, then set

Timings set first two to 17
Then set third to 39

This will then = current auto settings (specifically if you use 133x9, that is what it's using now)

Thanks for explaining will try it and report

heres the report from hwinfo http://s000.tinyupload.com/?file_id=45649488345781122524