I tried to restore the bios dump from my 3rd post, but all I got is a red Cpu LED @boot. This should work? Just want to fix my daily 🤪 @Lost_N_BIOS

should i try to restore it with the official Bios file from Asus site?

edit: I managed to restore my Bioschip with the stock Bios file from the Asus site and the Mainboard is back again - Windows boots again :)

so im on Day 0 again. Whats your Status at modding the Bios file? @Lost_N_BIOS

@Dan111baSh - Yes, I can update microcodes, but that affects all things you mentioned (may be positive or negative, only you testing can find out). LAN module is only used it you boot from LAN or Wake on LAN, RST only used if you use RAID (So, sounds like applies)
As mentioned, I would have to rebuild you a complete BIOS, your file at post #3 is partial BIOS (BIOS region only), so you cannot program that in by itself. Similar applies to stock BIOS from Asus, it would need edited first but is bootable once extracted from capsule.
It's inside a capsule so that would need removed first, but then it would also wipe your system specific info if you programmed it too, without properly transferring all data into the BIOS first in all proper locations (there is several)
So, sounds like you did the last thing At least you got it back up and running again

Here is properly fixed BIOS, erase chip, blank check, open file, write/verify. Then clear CMOS, boot to BIOS and load optimized, then save and reboot back to BIOS and set everything how you want, then you are back to proper day 0
Then, please clarify again what you want visible in a list, and what you want updated, then I will make BIOS for you to flash again via FPT
http://s000.tinyupload.com/index.php?fil...745799577173541

Thank you so far @Lost_N_BIOS . Should I restore the "fixed file" via programmer or ftpw.exe tool?

Here is the list:
ACPI Settings menu
-Enable /disable Hpet
-Enable /disable hibernation
-Enable /disable TCO Timer
-unlock PCH P2SB

updating microcodes and Rst for testing would be nice, too

Via programmer, how I mentioned above
Then, rest we can do with FPT, thanks for list, I will do those edits now

* Edit @Dan111baSh - Can you see >> Advanced >> ACPI Settings?
Also, can you see >> PCH Configuration?
Please show me image of what you can see inside Advanced >> PCH Config at root level (And top to bottom, if you need to scroll up/down)

I made some Screenshots @Lost_N_BIOS

@Dan111baSh - Please put those in a zip, thanks. About RAID, it's an issue for me, could take hours to sort out, but I can do it if it's a must for you.
But anyway, how important is that for you, you'd only be updating from 15 to 15, so kinda not huge diff anyway >>
EFI >>>> 15.5.0.2875 >> v15.9.3.3408
OROM >> 15.5.0.2875 >> v15.9.1.3271

http://s000.tinyupload.com/index.php?fil...869482716076883

its okay, rst is not important for me @Lost_N_BIOS

@Dan111baSh - I can do it, but not in a hurry, there is issue I would have to work around, and sometimes that takes me hours.
Unless you want to test possible bricked BIOS real quick, and recover with programmer if bricked, to see if added padding in your main DXE volume causes issues on this board or not?
Some boards it does not, others = instant brick, only way to know is to test. If you test, and it's fine, then nothing I need to work around and mod can be done quickly.

If you want to test let me know and I will send test file. << Never mind!! Issue resolved on final menu edit repack!

we can test RST later for sure :)

in 1st place i want the hidden entrys and test new cpu microcodes.

Thanks a lot @Lost_N_BIOS

@Dan111baSh - See my edit above, was editing while you replied All sorted, packging file for you now
You're welcome! Keep refreshing in about 3-4 minutes, I will edit mod BIOS here

* Edit @Dan111baSh - Here is your mod BIOS, flash via >> FPTw.exe -bios -f biosregm.bin
http://s000.tinyupload.com/index.php?fil...653694349435933

I've included the before/after (With M at end of name) of the files edited for the menu changes you wanted, so you can look and see, if you wanted
Setup edits to unsuppress some items & AMITSE/SetupData is to make same changes AMIBCP makes but done manually
If anything you wanted still missing, let me know and we'll get it fixed right away

*** WARNING *** - This BIOS is user specific! If you are not user Dan111baSh at Win-RAID.com forum, DO NOT USE THIS BIOS!!
If you do, and you are not Dan111baSh , then you will loose your serial, UUID, OG NVRAM, and possibly LAN MAC ID as well.
You have been warned!!!

should i do the "setup_var 0x90C 0x00" @efi Shell before, again? @Lost_N_BIOS

@Dan111baSh - No, you're good to go, all that is done already previously, just >> FPTw.exe -bios -f filename.bin
If you did not program in the "Fixed" BIOS I sent you, let me know, and I can repack this into complete BIOS for you to program in if you want, that way your Ethernet gets fixed and you program in mod BIOS all at once

i get "Error 368: Failed to disable write protection for the BIOS space.
FPT Operation Failed." now @Lost_N_BIOS

@Dan111baSh - Ahh, sorry! Then you will have to do the unlock again, it should be unlocked already if the dump you sent me was created after you unlocked it, but sometimes this happens.
If you want to wait, I can permanently disable that, so you'll only have to do one more time to flash in the one with it disabled for sure moving forward (unless you flash in other stock BIOS)

Thank you buddy @Lost_N_BIOS .
Everything works :)