Yes, I get that, but this is not how you should be checking these changes, look at the actual temp and fan speeds

@Lost_N_BIOS on post #79, what is the exact settings you want me to change? Also, do I have to change the values from post #74 back to default?

Any/all of them, you are looking to see if ANY change when (at what temp) fan speeds change or not. I assume none of this will work, this is almost always EC FW controlled.
The changes you made at post #74 did not work, so yes, you can change them back (or leave, or reflash BIOS)

None works. I will just repaste my laptop in the future. I can also prob the EC chip while I repaste. I will contact you when I am ready. Thanks for all your help.

@RogueDragon - Then new paste is about best you can do, or request custom BIOS with visible settings to change for that or a custom EC FW configured to what you want, sometimes they will do this.
I cannot do anything with EC FW usually, I'll look for you if you can give me specific temps and or speeds/% used, but I doubt I will be able to find anything.

Zitat von Lost_N_BIOS im Beitrag #43

---

$FPT is in the dump he sent at post #34, I get similar errors (but different) and cannot open file in FITc, if I try to open the extracted ME FW backup image body from BIOS's ME FW Backup area (DE90FFA8-B985-4575-AB8D-ADE52C362CA3)

---

Can you also help me unlock my bios advanced menu?
btw I have a Asus x532flc laptop
Laptop details
bios version: 304
Bios Vendor: American Megatrends
System Bios Version: 5.16
Intel ME Version: 14.0, Build 1205, Hot Fix 11
Bios Date:2020/04/07

Error:
Error 167: Protected Range Registers are currently set by BIOS, preventing flash access.
Please contact the target system BIOS vendor for an option to disable
Protected Range Registers.

FPT Operation Failed.