Screenshots of MEInfoWIN64

plutomaniac - Still at a loss here, I compiled his FD, dumped ME region + dumped BIOS region, still cannot open in FITc. I know opening this really doesn't help to check FPF side anyway, but it bugs me
And, the new MEINFOWin attached at #41 still does not give correct -verbose output
But, the main concern here = >> Is there any other way to check Measure/Verified boot status at FPF side without proper MEINFO -verbose output?

plutomaniac - Thanks, I don't understand any of that about the ME and FITc, sorry, as you know I don't ME FW very well So I don't know how to get CSE from his ME FW dump to compile FD + CSE + BIOS to open in FITc
Thanks for new tool version, hopefully it will now show proper MEINFOWin -verbose output! That is all we really need here to move forward, to check boot guard status at FPF

plutomaniac Thanks for further info, and link back to previous comments, but that didn't help me understand any of it (or I would have got that before)
This part I don't get >> To generate an EXTR $FPT from the SPI CSE LT image << I built full SPI image from his dumps, does not open in FITc, so I assume I need to make $FPT format ME FW from his dumped CSE FW region, and that is where I am lost.
I am seeing lots of errors in FIT, mainly all stopping file from opening, but there is a pile of errors no matter how I try to open. Below is what I see when trying to open his compiled BIOS I made from FPT dumps of FD, ME, BIOS

I am not seeing the error you mention. See my edit above, I added image. Yes, I am using 14.0.32. I will test with older then, thanks Never mind, I only have R3 and r4 release packages, you'll have to send me old FITc version
Here is the compiled image from his FD, ME, and BIOS region - http://s000.tinyupload.com/index.php?fil...921941010399810
Making this open in FITc is not really important to me if we can get MEINFO verbose to work properly, even if it opened in FITc now that still would not help me know if FPF has boot guard enabled or not anyway

plutomaniac OMG, DERP!!! Sorry, I missed that
Can you send me copy of old FITc, in case I run into this again later and actually need to work on the BIOS/ME with FITc

@RogueDragon was here today, but no reply In case you missed it, please grab the older MEINFO attached above at post #48 and run MEINfoWin -verbose and see if it works properly now

Thanks!

I will do it on the 5th.

@Lost_N_BIOS I used MeInfoWin64.

@RogueDragon - Thanks for report back! Bad news, we cannot edit this BIOS, at least not for menu changes, due to Intel Boot Guard enabled at the chipset (Measured/Verified Boot enabled at FPF)
We can however change any current setting you need changed, NVRAM is not covered by boot guard. These settings can be changed by grub/setup method, or RU method, whichever is easier for you.
You have already made a setup IFR yourself, correct? If yes, look through it and make a list of what you want changed, to what, and then give me and I will show you how to change via grub/setup or RU method.
Looking back, I think either grub didn't work for you, or this system, or RU was easier, not sure, but looks like RU method is what you should use.

@plutomaniac - old MEINFOWin64 worked for this ME, when time permits can you put together than older ME System Tools package so I can have in case needed in the future, thanks

I just wanted to change my laptop's fan curve to make it more aggressive. Is changing the temperature tri point the easiest method?