@Lost_N_BIOS - Yeah, I'm not sure what result will let me keep Intel sensor hub functionality. I think It's best to keep it on. BIOS turns ME status to temporary disable. I wanted to try me_cleaners soft disable status (hap bit).

I thought those bin files were the entire rom huh. I'm still waiting on the programmer.

I don't know what happened in the last line heh. I tried sending a photo of the bios chip and have another one on hand. Anyway, the bios chip id is a winbond 25q64fvsiq. I've attached a photo again, hopefully it worked.

I got the programmer :D

Here's the dump:

@curpy - Lots of things get messed up with corrupted or missing/disable ME FW, so this was probably cause of the items you noticed failing or missing. BIOS ME Temp disable is for one reboot, and is meant for ME Update purposes
Set the HAP Bit yourself using Intel FITc tool

No, whatever bin you are referring to, I assume what you sent me before, is only BIOS region dumps, this is not complete BIOS (only 6MB out of 8MB).

For W25Q64FV using 1.30 or 1.34 software and W25Q64BV ID - Please redo the dump above if you did not use this version/ID

I will fix ME For you, but if you want ME Disabled HAP Bit set, then you will again see all the issues you mentioned (ie missing or non-working items) probably

* Edit @curpy - Here is fixed BIOS (M1 BIOS region used), both with updated latest 11.8 ME FW - one with ME HAP set/reserved=Yes and one without (So ME FW enabled) - Program in using the info I mentioned above or write may fail
With both of these, FD is unlocked, so once you program one in, if you want to switch ME regions you can just write with FPT from windows or DOS (if ME Disabled, you may have to use FPT from DOS, I can't remember)
http://s000.tinyupload.com/index.php?fil...580981090176956