Hi I am new here
I just got an AtocmicPI single-board computer, with Aptio bios, just wondering if someone can guide me to upgrade the Intel FW and modified the bios for better speed.
I could install the win 10 on EMMC and run some tools provided in this forum and after some view reading
I could retrieve with TXEInfoWin64 -verbose it showed below

Intel(R) Anti-Theft Technology - NOT PRESENT
Intel(R) Capability Licensing Service - PRESENT/ENABLED
Protect Audio Video Path - PRESENT/ENABLED
Intel(R) Dynamic Application Loader - PRESENT/ENABLED
Intel(R) NFC Capabilities - NOT PRESENT

Last TXE reset reason: Power up
Local FWUpdate: Enabled
Get BIOS flash lockdown status...done
BIOS Config Lock: Enabled

Get flash master region access status...done
Host Read Access to TXE: Enabled
Host Write Access to TXE: Enabled
SPI Flash ID #1: EF6017
SPI Flash ID VSCC #1: 20252025
SPI Flash BIOS VSCC: 20252025
Protected Range Register Base #0 0x0
Protected Range Register Limit #0 0x0
Protected Range Register Base #1 0x0
Protected Range Register Limit #1 0x0
Protected Range Register Base #2 0x0
Protected Range Register Limit #2 0x0
Protected Range Register Base #3 0x0
Protected Range Register Limit #3 0x0
Protected Range Register Base #4 0x0
Protected Range Register Limit #4 0x0
BIOS boot State: Post Boot
OEM Id: 00000000-0000-0000-0000-000000000000
Get TXE FWU OEM Tag command...done
OEM Tag: 0x00000000
Global Valid FPF: Invalid
PTT FPF: Enabled
Perform Secure Boot FPF: Disabled
OEM Public Key Hash FPF: 0000000000000000000000000000000000000000000000000000000000000000
Key Manifest ID FPF: 00
Alternative BIOS Limit FPF: 0000
Secure Boot Status: Not Executed
Secure Boot Recovery Status: Not Executed
PTT Lockout Override Counter: 10
Keybox: Not Provisioned
Anti Replay Protection FPF: Enabled

with TXEManufWin64 -verbose


Intel(R) TXEManuf Version: 2.0.5.3107
Copyright(C) 2005 - 2015, Intel Corporation. All rights reserved.


FW Status Register1: 0x1F0000D5
FW Status Register2: 0x6900000E

CurrentState: Normal
ManufacturingMode: Enabled
TXEMemoryInvalid: Valid
OperationalState: Power Gated
InitComplete: Initializing
BUPLoadState: Success
ErrorCode: No Error
ModeOfOperation: Normal
Phase: HOSTCOMM Module

Get FWU info command...done

Get FWU version command...done

Get FWU feature state command...done

Get TXE FWU platform type command...done

Get TXE FWU feature capability command...done
Feature enablement is 0x60101040
gFeatureAvailability value is 0x1

Request Intel(R) TXE test result command...done

TXE initialization state valid
TXE operation mode valid
Current operation state valid
TXE error state valid
Verifying FW Status Register1...done

Request Intel(R) TXE test result command...done
vsccommn.bin was created on 08:26:29 12/15/2014 GMT
SPI Flash ID #1 TXE VSCC value is 0x2025
SPI Flash ID #1 (ID: 0xEF6017) TXE VSCC value checked
SPI Flash ID #1 BIOS VSCC value is 0x2025
SPI Flash ID #1 (ID: 0xEF6017) BIOS VSCC value checked
FPBA value is 0x0

Request Intel(R) TXE Runtime BIST test command...done

Get Intel(R) TXE test data command...done
Total of 1 Intel(R) TXE test result retrieved

MicroKernel - Internal Hardware Tests: Internal Hardware Tests - Passed

Clear Intel(R) TXE test data command...done

TXEManuf Test Passed

I also have saved my BIOS With Intel FPT

Intel (R) Flash Programming Tool. Version: 2.0.5.3107
Copyright (c) 2007 - 2015, Intel Corporation. All rights reserved.

Number of LPC Devices supported: 177
LPC Device Id: 229C.
Platform: Cherry Trail
Initializing SPI utilities
Reading HSFSTS register... Flash Descriptor: Valid

Region Limits as programmed into the SPI Registers
FREG0 - DESC Region:Base Address: 0x000000 Limit : 0x000FFF
FREG1 - BIOS Region:Base Address: 0x400000 Limit : 0x7FFFFF
FREG2 - TXE Region:Base Address: 0x001000 Limit : 0x3FFFFF
FREG4 - PDR Region:Base Address: 0x1FFF000 Limit : 0x000FFF
Address Limit 0x800000 Maximum Memory 8192kB


--- Flash Devices Found ---
W25Q64DW ID:0xEF6017 Size: 8192KB (65536Kb)


Please help me what should I do from here TIA