Hello world,

I have some problem when i turn laptop on, but it will not show any display. In the meantime, it shows out the display, Windows starts running perfectly. But, when i shut it down and starts again, it creates the same problem of not showing the display.

The main symptoms, I see device manager Intel MEI has exclamation sign with error code 10
STATUS_DEVICE_POWER_FAILURE

I also checked event viewer and I have this one error showing multiple times, "Intel(R) Management Engine Interface driver has failed to perform handshake with the Firmware (FWSTS0: 0x00004181, FWSTS1: 0x16462100)." I have tried many times to update/reinstall drivers.

HWINFO results :



looks like there's no ME on motherboard and bios settings no option for ME
Screenshot MEManuf and MEInfo



I also attach the SPI.bin
system model im using is ASUS K46CB Ultrabook
How can i fix this?
your help is greatly appreciated
thanks in advance

agungg

--------------------

up

I told you in PM how to fix, this can only be fixed if you do pinmod to unlock FD (I sent you linked info) or if you have a flash programmer.
Maybe though, your FD is unlocked! I see in SPI unlocked FD, but unsure, requested FD dump only in PM

* Edit @agungg - Here, since it seems like you do have unlocked FD from that SPI dump (if it's actual SPI dump) flash via >> FPTw.exe -me -f me.bin
http://s000.tinyupload.com/index.php?fil...792535284778111

Zitat von Lost_N_BIOS im Beitrag #2

---

I told you in PM how to fix, this can only be fixed if you do pinmod to unlock FD (I sent you linked info) or if you have a flash programmer.
Maybe though, your FD is unlocked! I see in SPI unlocked FD, but unsure, requested FD dump only in PM

* Edit @agungg - Here, since it seems like you do have unlocked FD from that SPI dump (if it's actual SPI dump) flash via >> FPTw.exe -me -f me.bin

---

Zitat von Lost_N_BIOS im Beitrag #2

---

I told you in PM how to fix, this can only be fixed if you do pinmod to unlock FD (I sent you linked info) or if you have a flash programmer.
Maybe though, your FD is unlocked! I see in SPI unlocked FD, but unsure, requested FD dump only in PM

* Edit @agungg - Here, since it seems like you do have unlocked FD from that SPI dump (if it's actual SPI dump) flash via >> FPTw.exe -me -f me.bin

---

@agungg- You're welcome! Great to see all working again!

It was no trouble to help, I'm always busy so it's OK

Dear Sir, I have the same problem with my Asus K46. I´ve been using my Windows 10 with this kinda of symptons. It doesnt matter restarting or shutting down. It always goes black screen. So I turn the power off, wait 5 seconds, and turn on. Everything start OK.

Could you please help me with the solution?

Greetings

ping
Brazil.

Download Intel ME System Tools v8 r3 - (2017-11-19) in this thread, section C2:
Intel (Converged Security) Management Engine: Drivers, Firmware and Tools

Open a command prompt as administrator, change to corresponding directory .....\Intel ME System Tools v8 r3\Flash Programming Tool\Windows64\ and run
fptw64 -d spi.bin

Attach the zipped file here or post the link to it.

I have the same problem can you guide me to fix the problem i have an asus z97 pro after some updates it bugged the driver .