Zitat von Lost_N_BIOS im Beitrag #15

---

@gog02 - yes, if setting is in BIOS we can make visible, but not 100% sure that is what you mean? I don't know about speedshift, if that disables turbo by default if you disable it, then you have to leave it enabled. Speedstep can be disabled anytime, this does not affect turbo

---

Hello,

this bios is great, would it be possible to get this done for bios 1.03 for the z390 Dark?

@gog02 - Sorry for delay!! I think MSI would have to unlink those options, I don't see them connected or interacting with each other in what I can see settings-wise. Send them email, explain, and ask them to unlink the option.
I cannot even see Turbo Mode in the image you showed above. Also, there is 2 different turbo modes in this BIOS, which are you asking about, Intel(R) Turbo Boost Max Technology 3.0, or Turbo Boost Mode?

@hodor418 - Why not just update to 1.07, BIOS already done and tested for that version? If you need something like old microcodes put into 1.07 I can do that instead, and it would be much easier.

Hi, so I have a bunch of tuned overclock profiles that don't seem to play nice with any bios revision higher than 1.03 (dont break whats not broken), even copying the settings manually don't seem to play that well. Maybe if there was some way to spoof the version on the new modded bios to allow me to use the 1.03 profiles?

The reason I'm looking to get a modded bios is when i have my profile set (4500mhz, cl16-17-17-28-2) there is an issue when the ram reaches approx 30 degrees Celsius, ram tests I run spit out a bunch of errors (which I believe to be TREFI temperature related issues on the modules). Looking at the modded bios there are options to disable the thermal monitoring among other configurations that might resolve this issue.
--------------------------

Hey @Lost_N_BIOS, i have no frame of reference about how difficult this is to do. I have no problem if you want to invoice me via paypal or something for whatever amount you deem fair for the work

@hodor418 - Yes, overclock profiles should not be used between BIOS, and actual OC settings would not work exactly the same between BIOS, you'd have to re-tweak settings any time you use a different BIOS, this is to be expected.
I'll redo mods on 1.03 BIOS for you I suppose It's not too hard to do If you want to send something my way that would be greatly appreciated, but it's not required or anything. I will send you a PM
I have to run now, but will do this first thing when I get back tonight in about 8 hours
------------------------------

* Edit -
@hodor418 - Here is unlocked 1.03 BIOS, as done originally for this thread.
http://s000.tinyupload.com/index.php?fil...557893260268860

However, now re-reading what you mentioned, I think you may need different type of menu mod/unlock, depending on which actual thermal settings you wanted to have access to in the BIOS. Please show me in AMIBCP which settings you were considering needing access to.
I see thermals in a few places in advanced, which I think you should have access to now with this mod BIOS (if not, let me know what is missing in Advanced and I can make visible), but I also see some thermal stuff in the memory config outside of "Setup" in AMIBCP.
I don't see any TREFI Thermals though, but I could have missed it. Anyway, if it's this menu outside of setup you need access to, then I will have to do a MUCH different edit for you, that is much more involved.
For that you'll have to give me some time and you'll need to pick some submenu somewhere you do not use or care about (can be visible or not), and then I will replace that with the memory config submenu instead.

sorry for jump this topic but i was so curious on ENABLE pci delay optimization on acpi but seems the bios freezeing is there way to fix it ??


things i want to enable/disable


ptid support disable
cs pl1/pl2 value changeable
see all pep menu

disable/enable intel rmt state
disable/enable hw notification
disable/enable pci delay optimization