Thanks for testing report! Thanks for dumps too, I checked, all changes going in as we wanted, so it's not a flashing issue

All the stuff you posted above, that's above chipset in IFR is simply disabling those settings/variables by default, nothing to do with the menu itself)

They did try to make it hard to add stuff back, on purpose, more so than usual, due to 2nd advanced removed from setup. Due to that, about 2nd advanced, it may not work properly even if we make it show up in BIOS.
Hopefully you need chipset more, since it should at least work, once we make visible!

I see now, there is two setup modules!!! Do you have flash programmer? If not, please order one, you need CH341A + SOIC8 test clip w/ cable, let me know if you need linked examples. These are less than $7 total shipped for both items
We can test removing OEMSetup and see if it will fall back to proper AMI normal setup then, but if this works, you'd loose all original menus. Or, we can also test swapping around some menus (By ID Swap, in various areas)
But for any of that, it's not really ideal to play around with if you do not have flash programmer, because it can brick BIOS easily and you want to be able to recover in minutes so you can carry on with more test (and have working system too)
I do not have much experience playing with AMICallback and dual setup's split like this, but I know it's possible to do both of the types of things mentioned above.

@lordkag is the only user I've seen with experience on that and he discussed it here some
[Sony VAIO] BIOS modding/hacking/unlocking - Some Questions (3)

Here's my notes and findings, no matter what you do/try, leave the Magic String edit I did as it is, so all those menus (13) are enabled at the AMI default setup root level with 01
Sorry, I don't think I can help more on this, due to the way they've replaced setup with their own instead, someone with more experience will have to help on this one.
I can however help you with swapping menu tabs if you want to try that, but it may be best to wait until you have programmer in hand and full BIOS backup made, checked by someone to confirm all OK, and then proceed.

Thanku sir!
1.I dumped W25Q32BV 4M with flash programmer
2.I changed desc with the dump
3.I flashed the desc unlocked dump back with flash programmer and dumped the full flash with Fpt -D full.rom

Full Dump here :http://s000.tinyupload.com/?file_id=80357697874165980262

waiting for you test rom

Hi Sir！
My programmer is ready and I want to try.
Could you help me to swapping menu tabs or tell me what I should do?
I tried to delete the OemSetupPage with uefitool，After that, all Menus gone, It just show me a blue background.
I think i don't need the boot menu at all,I can control it with hotkeys. The Security menu doesn't work for me either.
You can change boot menu and Security menu to the Invisible Advanced menu and Chipset menu ,I want to try it.

Thanks for all the help！
Keep waiting for your good news

So boot and security menus can be replaced, sounds like a good test then, lets hope we have some success that way.
Sorry this BIOS is such a pain! I've rarely seen this kind of menu replacement, and as you see lordkag complain too, it's not usual or ideal!
Please wait, I will see what I can do right now and get you some files to test

@jhsvip * Edit - I think this will fail, but you can try This is swap of Adv only for now, to see outcome

When you deleted OEM Setup page, did you do the 13 x 01 magic string edit too? If not, try second BIOS in above package
I also included one final BIOS, swapping in original setup body in place of OEM Setup Body. I suspect all edits here will fail, and you will have to either recover from DOS FPT if you can boot to DOS, or flash programmer, so be ready!

Sorry, this is outside my skill-set sadly, sorry
http://s000.tinyupload.com/index.php?fil...475836797286382

I will try today and report immediately！
Thank U so much! Love u！

Hi Sir
Here The Report ：
ADVSwap.bin -> Advanced menu is gone
OEMRemove.bin -> All Menus gone, When i press F2 to get into the bios It just show me a blue background.
SetupSwapinPlaceOfOEM.rom -> All Menus gone, When i press F2 to get into the bios It just show me a blue background.

All of them can boot normally

Should I have taken every one of them dumped？

Waiting for your next reply.

Thank u very much!

Another question： when i change boot mode to csm use amibcp，all boot options gone, but can boot 1st Uefi device，nothing can do the boot devices.

Many BIOS settings will be restored automatically after amibcp is edited . Maybe oemcallback did it

@jhsvip - Sorry for delayed reply, and thanks for the report back! Only person I know that can maybe help here is @lordkag

On the CSM/AMIBCP question, do you mean you edit stock BIOS and this happens? What exactly are you changing, and to what, in what menu (show me images)
Sounds like you are not using AMIBCP right, or you are not editing the correct items in correct (currently visible to you) menus.

Thanks for your reply Sir!

My laptop was broken lastnight, I'll tell you where i changed and upload the images after it fixed.

Thank you again!