@bressawsk - Sorry for the delay! Thanks for checking about error, I thought so, this is expected Please put the file below back into H2OUVE 100.00.16.08 folder, then run command below.
There will be list of success/failure, then reboot and make new BIOS region dump using FPT step #1 using new name, then now step #2 should pass/success, once that happens, upload the new biosreg.bin file for me to edit
http://s000.tinyupload.com/index.php?fil...954588320943316

H2OUVE.exe -sv varsM.txt

Zitat von Lost_N_BIOS im Beitrag #16

---

@bressawsk - Sorry for the delay! Thanks for checking about error, I thought so, this is expected Please put the file below back into H2OUVE 100.00.16.08 folder, then run command below.
There will be list of success/failure, then reboot and make new BIOS region dump using FPT step #1 using new name, then now step #2 should pass/success, once that happens, upload the new biosreg.bin file for me to edit
http://s000.tinyupload.com/index.php?fil...954588320943316

H2OUVE.exe -sv varsM.txt

---

@bressawsk - OK, and you're welcome! No rush here, so whenever you get back to it is OK with me

@Lost_N_BIOS

Sorry for the delay. FPT #step2 didn't show any errors at this time!
Check the attached files.

Thanks!

@bressawsk - Great! Here is 2x unlocked BIOS, first one may not get it all, so I included 2nd just in case
Please flash #1 first and then if no new power/Advanced menus, then flash in #2 - Let me know if #1 gets it too, thanks
Flash them in using FPT >> FPTw.exe -bios -f biosregm1.bin (or biosregm2.bin)
http://s000.tinyupload.com/index.php?fil...860011635328337

*** WARNING - To ANYONE with laptop and unlocked BIOS!!!! ***
DO NOT try to enable this graphics card or disable that card, switch cards etc. Otherwise you will end up with no display output (ie black screen) and no way to recover except by blind flash or with flash programmer.
You can change graphics related settings, like changing memory sizes, or core speeds etc, just don't try to disable one card or change which is main etc.
Additionally, be very careful when trying to undervolt CPU, you can leave BIOS unbootable due to CPU voltage too low (Sometimes even 0.05 is too much)

*** WARNING *** - This BIOS is user specific! If you are not user bressawsk at Win-RAID.com forum, DO NOT USE THIS BIOS!!
If you do, and you are not bressawsk, then you will loose your serial, UUID, OG NVRAM, and possibly LAN MAC ID as well.
You have been warned!!!

@Lost_N_BIOS

Wow that's awesome!! I will let you know about my tests with both bios.

Thanks again for your time!

=)

@bressawsk - You're welcome! Yes, please report back once you've had a chance to test and tinker, thanks

Do you also have Firmware limited TDP? I have the 1050 version and no XTU or Bios tweak seems to solve it, will cap to 54w short duration and 45w long period. I'm wondering if there is a way around this, considering I'm using LM, I don't have temperature problems.

@Lost_N_BIOS

Many thanks! I confirm both BIOS #1 & #2 fully working working! Ive playing with the configs and still couldn't remove the TDP Limit of 35w long duration.
Additional i remove some thermal limits, indeed, my system is working much more flawless, and the temps didn't go any degree higher.

Ps. Please everybody, carefull with unlocked settings (From any bios!) there are lot of sensitive options that can hard-brick your system.

Hello I need to download this Bios MOD but the link is broken; t6402f16-REQUEST-Acer-Nitro-AN.html can you help me please @ Lost_N_BIOS

TinyUpload is dead since 3 months ago I think
-----------------------------

I can't Put the link.. Sorry but is maded by @Lost_N_BIOS s

@Skraunes - Tinyupload has only been down for a little over a week now. Do you know any news/info about that?
Now that you have made some (1) posts you can add links

Merging this back to the main thread, you should have replied there initially
So, about this link.. All BIOS here for this model are personal, so you should not use any BIOS linked here anyway, please do the following below

First - Download the following package, and run the command below from each versions folder that directly contains it's exe.
Once done, copy the entire folder somewhere, delete everything but any created vars.txt and then repackage this and send to me, this way all created vars.txt remain in place in the folders of the version that created them.
https://www.sendspace.com/file/8v98ya

Command to run >> H2OUVE.exe -gv vars.txt

Then, once I have the above file, and send back to you AND You have flashed it back in, then you will do step #1 of below spoiler
Do not do this yet!! You have to wait to do this until after I send you back unlocked vars and you've flashed it in and rebooted, then you do below #1 and send me the file. I'm only adding this now to save time.

Thanks !! You are a real hero !!, His dns are down i contacted with Twitter support so maybe you need to change you upload servers/

@Skraunes - You're welcome! And thanks, so you spoke with them (Tinyupload) directly? If yes, and it's just DNS servers, hopefully that will be fixed soon, it usually doesn't take this long though so worried
It's hard to find a good free host, without hassles to download, that also doesn't delete files after 10-3 days etc. Do you know any good ones?

One more thing; i can't see the C.2 section on the thread

C.2 is in second post of the linked thread, I just checked to make sure the topic info wasn't resorted or something