@UrWorstNytmare06 - Flash this mod vars back, using the same version that created it, command below
http://s000.tinyupload.com/index.php?fil...581458656392676

H2OUVE.exe -sv modifiedvarsfilename.txt

There will be long list of success/fail, this is expected and normal, reboot once it's done.
Then dump BIOS region again with new name (FPTw.exe -bios -d biosregnew.bin), and try to flash it right back (FPTw.exe -bios -f biosregnew.bin) , once success send me the new BIOS region to unlock

@Lost_N_BIOS - All the things went right as they should be and here is the requested new biosreg dump file

@UrWorstNytmare06 - Thanks, here is your unlocked BIOS
http://s000.tinyupload.com/index.php?fil...432752304426095

Flash back via >> FPTw.exe -bios -f filename.bin

* Edit - @UrWorstNytmare06 - once you flash, please show me image of root of >> OverClocking Performance Menu
Few things may need further unsuppressed, I was not sure and wanted to wait to see what you see without me touching the rest there

*** WARNING - To ANYONE with laptop and unlocked BIOS!!!! ***
DO NOT try to enable this graphics card or disable that card, switch cards etc. Otherwise you will end up with no display output (ie black screen) and no way to recover except by blind flash or with flash programmer.
You can change graphics related settings, like changing memory sizes, or core speeds etc, just don't try to disable one card or change which is main etc.
Additionally, be very careful when trying to undervolt CPU, you can leave BIOS unbootable due to CPU voltage too low (Sometimes even 0.05 is too much)

*** WARNING *** - This BIOS is user specific! If you are not user UrWorstNytmare06 at Win-RAID.com forum, DO NOT USE THIS BIOS!!
If you do, and you are not UrWorstNytmare06, then you will loose your serial, UUID, OG NVRAM, and possibly LAN MAC ID as well.
You have been warned!!!

@Lost_N_BIOS - hey, i already flashed the bios file before your edited post and everything is working fine. Thank you Thank you very much for your time and help🤩🤩

@UrWorstNytmare06 - Thanks! Yes, I assumed unlock was OK, but I see some settings and submenus that are probably still hidden from you, that's why I edited that in.
Did you disable Overclocking Feature? I set that to enabled by default, but only in setup, not in vars. Anyway, can you please enable that and show me same area again after reboot, then I will unlock rest of missing items for this page.

@Lost_N_BIOS - Here it is
*Edit - Hey i'm trying to set all my cpu ratio limit to 40 but i think some settings are not getting updated.

You cannot override Intel spec for your CPU, what CPU do you have?
Thanks for images, I will get you further unlocked BIOS tonight when I have more time (only have a few minutes here right now)
----------------

* Edit - @UrWorstNytmare06 - So, only a few missing (power limit settings) from the additional turbo page you showed, but rest at root where visible once you enabled that OC setting I asked about.
Here is new BIOS with rest now visible at the turbo page - http://s000.tinyupload.com/index.php?fil...740955149932201

There's probably other stuff hidden from you still at Advanced pages, but I'd need to see images of that at root level at first, and then possibly inside from of the submenus there too.
If you do send images of any of this for further checking, please resize them to 800-1000px wide and or also put them in a max compressed zip, thanks!

Repost because of wrong category

Hey everyone, @Lost_N_BIOS
I have a ch341a programmer and soci8 clip and have made a bios dump and would like for the advanced options to be unlocked BUT ALSO to unlock the legacy boot option instead of uefi only. See mod.bin for unlocked advanced option only.

FOR: Lost_N_BIOS

Last night you were contacted by St1cky regarding unlocking the ability to allow me to change from uefi to legacy in my bios(as well as unlock all other advanced settings which I currently have unlocked). In the reply back to st1cky, you asked for: if someone else made my modded bios, yes, yes they did, and how I flashed mine (I used a CH341a programmer and a soci8 clip. You also requested the modded bios dump which you can find here: https://drive.google.com/file/d/1WK5_BNG...ew?usp=drivesdk . Here is my original bios dump with no mods: https://drive.google.com/file/d/1SoEN2Xp...ew?usp=drivesdk.
Let me know what your thoughts are .

@Fernando:
thanks for deleting that other posts, I didn’t realize I made that mistake. I have seen that thread but the laptop in the title is different from mine by a lot so I thought it would be a good idea just to keep separate because I was already kind of (a friend was ) in contact with lost_n_bios.

Clarification is needed here on what model you have, you and St1cky sent me different model names. Anyway, I just replied to your PM, to keep my sanity please answer all that out here, I didn't realize until now you had a thread.
Fernando is correct, all/most PH 300 I've been moving into that thread, but it really does not matter to keep all similar together because each and every BIOS is personal anyway so no one can use anyone's BIOS from before them, so it's an ongoing mess

I’m so sorry, I just saw this after replying to your pm.

Here is my reply:

I’m going to start from the top down to answer your questions:
1. Have I already unlocked the advanced settings, Yes, someone modified my dumped bios yesterday
2.my laptop model is the Acer predator Helios 300 Ph315/51/78NP
3. Here is a link to the stock bios from manufacturer (not my dump) https://www.acer.com/ac/en/US/content/su...roduct/7603?b=1
4. Your assumption is correct, I dumped my bios, he unlocked the advanced page, debug page, and then I reflashed. The problem is is that he didn’t unlock the legacy option which should be on the boot page as far as I am aware. It’s up to you wether you want to edit the already modified bios or the stock bios, I will link both below.
5. Here is a link to the modified bios which unlocks the advanced and debug page but not the boot option legacy: https://drive.google.com/file/d/1WK5_BNG...ew?usp=drivesdk
6. And here is a link to the stock bios that I dumped: https://drive.google.com/file/d/1SoEN2Xp...ew?usp=drivesdk

It is up to you which one you would like to use but if you did start from scratch you would have to re unlock the advanced and debug page

@Kebicle - Due to #1 - Then, what do you need further unlocked?? They did unlock Power and Advanced menu for you, correct?
#3 is a broken link, but no worries, I already have stock BIOS for this model due to above linked thread Fernando mentioned, that's where I unlocked this model for other user
Thanks, I will further edit #5 then. Why didn't he unlock Power page for you too (Ohh, I see, not much interesting there anyway ) * Please fix link at #5, or re-upload etc, that is a dead link, or broken link as well
Yes, I see in Boot where Legacy option is hidden from user, easy to fix

* Edit - Actually, this one is where I've unlocked this model for users recently, few others in PM I guess, so not the above linked thread Fernando and I mentioned - Acer Predator Helios 300 (PH315-51-78NP) - Unlocked Settings
I will merge your thread to this one above once you've seen this post

@Lost_N_BIOS

Sorry I was typing my response on my phone, now on my laptop. Sorry to waste your time.

I want the legacy option to be unlocked (you know this I was just saying to your first line) and if its easy to do the power option aswell. Dont waste your time on it if its not easy though.

ORIG link: https://www.acer.com/ac/en/US/content/su...roduct/7603?b=1

#5 Modded link: https://drive.google.com/file/d/1oXwaTK6...iew?usp=sharing

Thanks for your help. Not sure why the links decided to quit on me.

Please tag me in the merged Thread in your response.

Links probably broke due to copy/paste from PM (not source in PM)
@Kebicle - Merged now