@ferasalloush - OK here is the quick test needed before I do full unlock - Please let me know which of these BIOS show a new second advanced?
http://s000.tinyupload.com/index.php?fil...529396159317624

Test in order below, stop once you see 2nd advanced and let me know which. Flash each one >> FPTw.exe -bios -f filename.bin << Then reboot to BIOS, load optimized defaults and reboot back to BIOS and check to see if you see new advanced or not (2x advanced for this test, just a test)
1. SetO
2. SetAMIT
3. SetAMITSDST
4. SetAMITSDSB

Also, I need an image of your Exit BIOS page, thanks And, do you use the "Security" page at all?
All settings will be left at default, or I can change them to whatever you wanted, but in order to add 2 x advanced + Chipset I have to replace one main menu (unless you are OK with swap new advance for old advance)

@Lost_N_BIOS The SetAMIT opened up the second advanced tab so i stopped at this step. I attached the EXIT page in this link : http://s000.tinyupload.com/index.php?fil...014885838466867
About the security tab I actually don't use it except to disable secure boot, I don't mind replacing the advanced tab with the new one. Your awesome man thanks.

Thanks for the test report, and image. Have you used AMIBCP (I will send PM)? If yes, look at your BIOS and compare the original advanced with the hidden one, some stuff in original you want/use may not be in the advanced, that's why I wanted to replace security possibly.
If you know 100% you will always want Secure boot disabled, I can hard disable that and then swap out the new advanced into original security position and then add chipset too
Plus I believe I can enable the overclock performance menu/tab too, without needing more tab positions, that will be my next test for you tonight

You're welcome, and thank you too!!

* Edit - @ferasalloush - Please test in order shown below, stop once you see Overclock Performance Menu appear (should be new tab/section by itself)
1. SetAMITOCP.bin
2. SetAMITOCPS.bin

http://s000.tinyupload.com/index.php?fil...835466878175270

@Lost_N_BIOS Hi, Yes I used AMIBCP and we can replace the security tab and keep secure boot always disabled. The only thing that I modify in the original advanced tab is as follows and the rest is default :

1 intel virtualization technology - disabled
2 VT-d - disabled
3 SATA - AHCI.

I will Test the OC and report back in a few minutes
------------------

@Lost_N_BIOS I just tested both, none of them opened up the OC menu. Hey ! do we need the main tab ? its only an information tab ?

Thanks for test report! Hmm, please test these two now, if these don't work, I will have to add that in other way (if possible)
http://s000.tinyupload.com/index.php?fil...370025361196391

No, I don't think you have to have main, why? Are you thinking if we can't get OC menu to show up in way I'm trying now, to replace main with it? If yes, then yes, we can do that too if you wanted

Secure boot is disabled by default, so no changes needed there, I just hide/replace it.
As for Advanced, Virtualization is in 2nd advanced, but Vt-d is not, however it is located in chipset. SATA/AHCI is in chipset as well.
So, if you want, we can just replace original advanced with hidden one

So, we can do this, if you want, if above doesn't give you the OC menu/tab
Main >> Overclock Performance Menu
Advanced >> Hidden Advanced
Add Chipset

This will leave you with security page, or we can leave main and replace security with Overclock Performance menu, up to you.

@Lost_N_BIOS rebooting and testing now, will report back.
Fyi anytime I restore to default : secure boot is enabled by default.
-----------------------------

@Lost_N_BIOS Also does not show up the OC.
What we can try is :

1 - replace main tab with OC
2 - replace new advanced with security tab.

Thanks, this means that I'd have to add it (OC Menu) manually, not a big deal but it just cuts into the amount of alloted possible tab space

And thanks for heads up about secure boot, it should be disabled once you load optimized and reboot. You are talking >> Security >> Secure Boot >> Secure Boot Control << This setting, correct?

So, Disable secure boot by default + the following menu changes (When it comes to these kind of edits, there is no try only do, so it will be as mentioned )
1. Main >> Overclock Performance Menu
2. Security >> 2nd hidden Advanced
3. Add Chipset

@Lost_N_BIOS Thanks man. ok waiting for any updates

@ferasalloush - You didn't confirm my findings, or if I was checking correct/same thing about, about Secure Boot. Please load optimized, reboot to BIOS and see if that is disabled by default as I see it in the BIOS, and confirm we're talking same thing.
If we're not talking same setting, show me image of exact thing you mean.

@Lost_N_BIOS you are right its only the secure boot control that will be enabled. The actual secure boot is disabled

Show me image, so I can know what I need to change (To disabled, correct)

@Lost_N_BIOS Yes sir the control has to be disabled http://s000.tinyupload.com/?file_id=11290172951810766566

Sorry, more confused now. That is the exact setting I was talking about, this is disabled by default after you load optimized defaults and save/reboot back to BIOS, correct?
Are you saying it's enabled by default, AFTER you load optimal defaults and reboot? See below, optimal default is disabled.
Ahh, I do see it enabled at setup though, but usually this is not used for actual BIOS settings being applied, but maybe this is one of those rare instances it is used? I also see enabled once at MFG NVRAM but disabled at STD NVRAM, so it's all mixed up, I'll disable it everywhere


Anyway, it's OK, I just needed to confirm 100% that is the setting you want, disabled, and I will disable everywhere at once (NVRAM too)

@Lost_N_BIOS don't confuse me now just disable it.

OK, will do then! Watch this space for edit, give me about 10-15 minutes, due to NVRAM edits for this setting change take a minute to do, rest only takes seconds

@ferasalloush - Edit - OK, if this fails to load BIOS, boot to DOS and reflash any previous BIOS region (maybe get ready for this in advance )
I'm mentioning this because I've never replaced main, I assume it will be fine like any other replacement but you never know and you know how assume goes sometimes
http://s000.tinyupload.com/index.php?fil...505053291174286