new txe version 2 driver Intel Trusted Execution Engine Interface Braswell/Cherry Trail 2.0.5.3117 WHQL:
-https://we.tl/t-TgMq6LoA3T

I leave it here for consideration.
I had a laptop that i put t to sleep automatically after 5 minute, and to hibernate after 30 min.

The most time i found the laptop stuck with a black screen.
I resolved it with TXE EOP Message bios option from enabled to disabled.

I have to admit i don't understand how to put a recent TXE 4 firmware in a flashable file for my ASRock J5005.
There is an existing BIOS online that updates the TXE https://www.asrock.com/mb/Intel/J5005-ITX/index.de.asp#BIOS
I wonder if i overlooked a howto somewhere that explains how to update the TXE part of this file for such a case?

Can it be that easy?
Loading the BIOS from ASRock into FIT and setting it up the way explained for cleaning with the dummy key etc.
Overwriting the TXE Region.bin in the Decomp folder with the latest TXE firmware shows up with the corresponding number under Flash Layout -> Intel TXE sub partition.
After build copy the SMIP part.
I have a file then that shows as "configured" for the ME and behaves valid in UBU.
Anything i got wrong and some things get lost that way?
https://www65.zippyshare.com/v/CzrIagIt/file.html
Edit: One thing that worries me is the different offset of the microcode in the rebuilt version.
Edit2: I got an updated BIOS from ASRock support that contains the 4.0.20.1310 TXE. FIT creates a completely different file with the 4.0.20.1310 out of the firmware repository. The TXE Region.bin created from FIT and the original ASRock BIOS is ~250kb smaller. Is this expected? Re-creating the BIOS in FIT without exchanging any ROM spits out pretty much the same file as the original. Some bytes are different. Most likely version numbers and alike.

Error 7: [SMIP Controller] Invalid Manifest Extension Utility path. Manifest Extension Utility path set to: ''
Error 6: [SMIP Controller] Failed to sign SMIP data.
Error 37: [Ifwi Actions] Failed to build SMIP data.
Error 19: [Ifwi Actions] Failed to prepare OEM SMIP data.
Error 12: [Ifwi Actions] Failed to prepare one or more IFWI components.
Error 15: Failed to build.
Failed to build!
Hello, I used Intel cstxe system tools V4 to clean up the me area and build me. How to solve the problem

Link to meu.exe under Build Settings, it is in the guide.

As reported 3 posts above a rebuild using Flash Iamge Tool 4 for my GLK with a different TXE moves the offset of the µC.
This only happens if the TXE is a EXTR file. Putting in the different RGN versions does not change the µC offset on rebuild.
I hope this observation is new and is of some help for something.

Edit: Did anybody ever update a TXE v4 successfully?