Nice, hopefully it will arrive soon! I will redo mod on your EZ Flashed 2801 BIOS.
And to answer your previous now edited out question, yes, that is why I wanted you to use EZ Flash to flash the stock BIOS files and then dump with FPT, so all board specifics remained in place.
How did you dump this, and how did you dump the previous backup you sent me, both same way?

It arrived today!

It was flashed with EZ Flash after booting into BIOS.

It was dumped with fptw.exe.

(The earlier backup was dumped with fptw64.exe, but I don't use that any more, at your suggestion.)

@MentalNomad - Great your programmer arrived! What is your BIOS chip ID? Ohh, it looks like GD25B128C from page one, correct?
I will do your BIOS now... Wait, actually, give me a BIOS dump with your programmer and I'll edit that, this way you get used to using. Use software version 1.34 and BIOS ID GD25Q128

Here is guide on using - [GUIDE] Flash BIOS with CH341A programmer
And here is general CH341A software, driver needs installed once only, before you start using - http://s000.tinyupload.com/index.php?fil...695330485827902

ASProgrammer 1.41 will also work, and has your exact chip ID - https://github.com/nofeletru/UsbAsp-flash/releases/

Got the programmer working to read; sending links in DM.

Both chips were flashed to 3801, dumped, and 7z together a Ultra.

Links in DM, @Lost_N_BIOS . Thanks, again.

Fixed BIOS sent in PM, let me know how it goes out here in case anyone else needs a variant of this BIOS later (I will rebuild it on stock BIOS for others)

Life got in the way, but I finally got around to getting the chip programmed (with Colibri) and I improved my CPU mod.

I took the advice to use tape to mask off the two pads I need to short, and then applying the silver conductive ink more heavily. Worked great.

New system boots into BIOS and Windows 10, no problems!

Will share pics another night... imgur keeps failing with errors.

THANKS A BILLION, Lost_N_BIOS and chinobino!

--------------------------------------

Photos on imgbb.com.

https://ibb.co/CHYK6YW
https://ibb.co/LCYhdC5
https://ibb.co/68Qpn3Q

It's OK, life has been a bit of a weird one for us all lately I'm sure, hope you are staying healthy!
Great to hear the masking off of the pads helped a lot with that conductive ink How much did that conductive ink pen cost you?

Also great to hear the mod BIOS is working good for you You're welcome! Stay safe out there!

Staying safe is getting harder - I'm in a hot spot.

The pen was about $10 US.

@MentalNomad - Hope you can keep healthy my friend!! Thanks, I will have to look into these pens, always mean to get one for random quick tests, but forget to pick one up.