Zitat von iceman im Beitrag #1237

---

There are mistakes, under the win8.1 system, thank you

---

Zitat von temroa im Beitrag #1239

---

plutomaniac do you should us to use mei driver v11.0.0.1133 ? ım asking because you was writed "i dont should mei v11 driver for now"

---

Zitat von Ludolf im Beitrag #1242

---

Can you please explain how to do the dump? You mean flash programming tool, right? Isn't it only for building new images?

---

Updates 08/05/2015:

* Updated Intel MEI Driver INF from v11.0.0.1133 --> v11.0.0.1134
* Updated Intel MEI Drivers & Software (Consumer) from v11.0.0.1133 --> v11.0.0.1134
* Removed Intel ME System Tools v9.6 r1
* Removed Intel ME 9.6 Consumer 1.5MB Firmware v9.6.0.1038
* Removed Intel MEInfo Tool for ME 9.6 Firmware v9.6.0.1038
* Removed Intel MEManuf Tool for ME 9.6 Firmware v9.6.0.1038
* Removed Intel FWUpdate Tool for ME 9.6 Firmware v9.6.0.1038

Intel ME System Tools v10.0 from r1 --> r2:

* Added WPT-LP 1.5MB FW Bring Up Guide v1.0 (06/2014)
* Added 5MB FW Release Notes v10.0.26.1000 (HF, 07/2014)
* Added 5MB FW Intel MEBX User Guide v1.0 (03/2014)
* Added Broadwell PCH-LP SPI Programming Guide v1.0 (06/2014)
* Added Certificates (from v10.0.28.1006)

Intel ME System Tools v6.0 IGN from r2 --> r3:

* Updated Flash Image Tool from v6.0.50.1252 (07/2013) --> v6.0.50.1260 (04/2015)
* Updated MEVerificationUtility (MEInfoWin from v6.0.0.1184 --> v6.0.50.1252)
* Updated ME Ignition FW Bring Up Guide from v1.2 (08/2012) --> v1.3 (05/2015)
* Updated Management Engine Firmware Readme from v6.0.50.1252 (08/2013) --> v6.0.50.1260 (05/2015)
* Updated Ignition Firmware Release Notes from v6.0.50.1252 (08/2013) --> v6.0.50.1260 (05/2015)
* Updated SMBus to PECI Bridge Protocol AppNote from v1.8 (04/2013) --> v1.9 (10/2013)
* Updated SPI Programming Guide from v1.2 (08/2012) --> v1.3 (05/2015)

@vasia

The current drivers (even v11) are compatible with all systems from 6-series and up. That means ME7 and up (officially it's ME8 and up).

After 9.0.0.1287 the driver was changed with a different structure and name. But other than that, it's just a newer driver which still supports older systems.

The only problem: Some Z77 systems (like my own GA-Z77X-UD3H) reported a Code 10 or Code 43 after Wakeup from Sleep with any driver after 9.0.0.1287 (latest to have the old format). Even the latest v10 driver (10.0.30.1054) seems to cause this issue but the ME11 drivers finally resolved it according to my testing.

Conclusion: Install driver v10.0.30.1054. Put the computer to sleep and then wake it up. Check Device Manager > System Devices. Is Intel Management Engine Interface showing error Code 10 or Code 43? If it's ok, you are good to go. If it's not, install the latest v11.0.0.1134 driver which should not cause such a problem.

Zitat von temroa im Beitrag #1247

---

ı remember you was told us "ı dont should me driver v10" i dont remember the reason do you should this me v11 driver is it right choice for end user ?

---