@plutomaniac

Would you be so kind and compile Firmware Version 14.1.60.1790 with PMC FW Version 140.2.1.1018, PCHC FW Version 14.0.0.7002 and PHY P CMP v12.14.214.2014 so it would be ready to use with FWUpdate Tool? I have 10875H CPU on HM470.

In the link from post above there are always 2 versions of bin files for CSME, PMC, PCHC, PHY, preproduction and production, and I don't know what should I use, and there are also other bin files in folders SAM and Prestitched and here I also don't know what to do with them, as I never saw this bin files.

I think the pack you required would fit for the 10700k z490 too, right ?

I think, yes

@plutomaniac thank you for the tools + guide.
I came here in the hope to make PTT work. It can be turned on in bios, but it doesn't show up in windows.
In some of your posts you mentioned locking me would help (it is in manufacturing mode atm)

But FPTW.exe -closemnf returns:
Error 51: Could not access PCI device.
Error 51: Could not access PCI device.
Error 64: Failed to initialize SPI interface.
FPT Operation Failed.

info-tool:
CurrentState: Normal
ManufacturingMode: Enabled

Board: Gigabyte GA-IMB410TN
FW Version 14.5.32.1397 H Consumer

I already updated fw to recent version
PTT is also enabled in fit

Have you/anyone an idea why I cant lock my me?

Somehow locking worked today, maybe a restart wasn't enough and the power cycle did the trick?
Sadly tpm still doesn't show up in windows

If someone wants here is a link for ME FW compiled by me and ready to use with update tool:
https://www2.zippyshare.com/v/XPBDRQTK/file.html

Compiled with : Intel (R) Flash Image Tool. Version: 14.0.60.1790

CSE ME: 14.1.60.1790 production
PMC : 140.2.01.1018 production
PCHC : 14.0.0.7002 production
PHY : 12.14.214.2014 production
SAM : 01.0011.00 production

OTHER:

As for SAM I added it to FIT to compile full image but I have no idea if it should be there or not. I only know that the FW can be compiled without it and ME analyzer shows FW Update ready this way or another.

I don't know if PHY AND SAM is needed or updated during flashing for CML CPUS anyway.

FINDING:
Finding is that, the image compiled from pre production images shows some different chipset EBG (instead of CMP) for PHY.

The .bin files not on MEGA yet ?

Hmm, I must be blind, but I swear the Fw are not there.

PS. Yes, I am blind. Sorry. It's either that or they were actually not there like 10 minutes ago.

Zitat von plutomaniac im Beitrag #5616

---

CSME 15.0 Consumer H B v15.0.35.1932

---

@plutomaniac

Here is a link for new MEI driver 2124.100.0.1096 dated 07.06.2021

Pack contains HECI.inf only

https://www80.zippyshare.com/v/yV3Ij9KH/file.html


BTW
I don't know if it is related but on my laptop I have flashed CSME 14.1 Consumer H A v14.1.60.1790 and somehow my memory AIDA64 scores are better now
I have 2x16GB 3200 16-17-17-33-1T DDR4 SODIMM
READ is at 49.4 / WRITE is at 50 / COPY is at 47.8 / Latency is at 46.5
on previous CSME v14.1.53.1649 it was
READ is at 49 / WRITE is at 49.8 / COPY is at 47.4 / Latency is at 46.7

Zitat von Krzyslaw im Beitrag #5623

---

@plutomaniac

Here is a link for new MEI driver 2124.100.0.1096 dated 07.06.2021

Pack contains HECI.inf only

https://www80.zippyshare.com/v/yV3Ij9KH/file.html


BTW
I don't know if it is related but on my laptop I have flashed CSME 14.1 Consumer H A v14.1.60.1790 and somehow my memory AIDA64 scores are better now
I have 2x16GB 3200 16-17-17-33-1T DDR4 SODIMM
READ is at 49.4 / WRITE is at 50 / COPY is at 47.8 / Latency is at 46.5
on previous CSME v14.1.53.1649 it was
READ is at 49 / WRITE is at 49.8 / COPY is at 47.4 / Latency is at 46.7

---

Yeah I did them few times and those are average

Of course I can do better than that if I spend more time on sub timings or just by disabling ring down bin for the cpu