Is it possible to upgrade a ME 8.1.x firmware to a later version, i.e. >8.1.x such as 9.x and so?

Zitat von onuracengiz im Beitrag #5339

---

Intel Management Engine Interface (MEI/AMT) Version 2048.15.0.2027 WHQL

---

Zitat von random im Beitrag #5342

---

Zitat von onuracengiz im Beitrag #5339

---

Intel Management Engine Interface (MEI/AMT) Version 2048.15.0.2027 WHQL

---

This driver removed the software components for me (Z370 motherboard) and WU updated the Generic entries them with outdated Intel drivers, but just 2 out of the 3 software comps.
Gonna reinstall the older driver.

---

Zitat von onuracengiz im Beitrag #5344

---

Zitat von random im Beitrag #5342

---

Zitat von onuracengiz im Beitrag #5339

---

Intel Management Engine Interface (MEI/AMT) Version 2048.15.0.2027 WHQL

---

This driver removed the software components for me (Z370 motherboard) and WU updated the Generic entries them with outdated Intel drivers, but just 2 out of the 3 software comps.
Gonna reinstall the older driver.

---

try the new 2101.15.0.2080 version if something similar happens let it uninstall (odd though,it should not do that),cut the connection,use have disk method.if still the new driver has not been accepted this possibly means its the end of the road for your device which translates to you wont need to worry about the updates anymore,thats the lastest version (previous one) possible for your device

---

Good to hear

Hello, i have a problem :
i have a desktop pc with a motherboard Asus Z97-A . And with Dumo software, it informs me that a major update is available since several years ,but i never managed to install it :

- Intel Management Engine Interface 2040.100.0.1029

On page 1 of this topic, in A1 i tried to install the " Intel MEI Drivers Software v2101.15.0.2080 DCH " or " MEI Software v2044.15.0.1951 MSI "
but when i run the setup, windows stops it and replies :
" this platform is not supported "



And i also downloaded the driver only on page 1 of this topic in A2 : " MEI Driver v2040.100.0.1029 (Windows 8, 10 <= 1703) "

but when i go to my device manager > system peripherals > Intel Management Engine Interface > right click mouse > properties > driver > update driver > browse my computer for driver software
and that i go to the place where i downloaded the IMEI :
Windows does not want to install the IMEI it always tells me that i already have the most recent driver installed while this is wrong of course, i currently have the IMEI version :
11.7.0.1057 old from 19/11/2017

sorry for my average english, i'm french .Do you know a solution? thank you in advance for your help

No its not wrong at all, DUMO relies on general information...not specific HW ID.
If u use for ex: Driver Easy it will point u the the version u got now and last one for Z97, ME9 as the 11.7.0.1057.
Its pointed in point A related to older chipsets 7 8 9

Acer vn7-792g
Intel 100series/c230 chipset

ME firmware successfully updated to 11.8.82.3838
ME software successfully updated to 2047.100.0.1039 (Intel MEI v2101.15.0.2080)

Tools used;
CSME Firmware v11.8.82.3838 (CON H DA)
Intel CSME System Tools v11 r37
ME_Analyzer_v1.185.0_r227
Intel CSME Version Detection Tool

Zitat von MeatWar im Beitrag #5349

---

No its not wrong at all, DUMO relies on general information...not specific HW ID.
If u use for ex: Driver Easy it will point u the the version u got now and last one for Z97, ME9 as the 11.7.0.1057.
Its pointed in point A related to older chipsets 7 8 9

---

Ur problem is not related to ME Firmware 9 period. Ur question is related to the driver and if u check latest versions presented (Modern ones) u will not find ur HW ID in the INF of the driver.
Wot u need is in section D1 or D4

MEI Software v11.7.0.1069 includes MEI Driver v11.7.0.1057 which is the latest supported version for that system
You can try and possibly update it’s firmware though
if you are already using bios version 2801 (not the latest but 3503 is beta therefore i dont recommend it)

this is ME Analyzer report;


so you need this firmware ; ME 9.1 1.5MB v9.1.40.1000
and this tool; ME System Tools v9.1 r7

Thank you for your answers
@onuracengiz thank you for your links.

i'm still in bios 2801 ,will the 2 tools you just gave me work with my version of bios?

also i am a novice and i do not know if these 2 tools are complicated or not to understand, to use ?
should i run this one first? : ME 9.1 1.5MB v9.1.40.1000 then this one next? : ME System Tools v9.1 r7 and that's all? or will there be some settings / parameters that i have to do with them?