It worked. Thank you.
What is this magic that you do ?
Or what was I doing wrong ?

That is true, as I tried ASUS's own update firmware and gave the same stupid error.
Thank you again, you're a magician :)

I found these documentations about Intel ME components drivers:

Intel Local Manageability Service (LMS):

https://github.com/intel/lms
https://software.intel.com/sites/managea...lityservice.htm

Intel(R) Dynamic Application Loader Host Interface (DAL):
https://software.intel.com/content/www/u.../tools/dal.html
https://github.com/intel/dynamic-applica...-host-interface

I couldn't find anything about Intel(R) iCLS Client!

So basically Intel LMS is just to receive messages from ME and report these messages into the Windows Event Viewer. So unless you want to read these messages in the Event Viewer LMS is useless. it has other job described in the links, but it is only if you have AMT!

I could find links about DAL long time ago, strange my search engine wouldn't give me anything about LMS although apparently these information was out there the whole time.

Strange that LMS gave me high CPU usage although MEInfo was reporting no errors.

Hi

I have a problem. I wanted to update my ME FW but after following the guide from first page me analyzer is showing me.

Note: File size exceeds firmware, unneeded padding!

I have been always following the guide and this is not the first time I am preparing me fw update with FIT but this the first time I recieved this error.

With latest Intel (R) Flash Image Tool. Version: 14.0.36.1158 from repo I wanted to merge following FWs to make an update on my laptop with HM470 platform with 10th gen i7 cpu
CSE ME 14.1.51.1517
PMC 140.2.01.1015
PCHC 14.0.0.7002

Could someone help me with this? With ME from 14.0.36 branch I have no problem but with 14.1 it is giving me the above note about padding.

One finding: I don't have this note in me analyzer when I use ME FW that is rgn but when I use extr versions I have the above note.

Best regards

Zitat von Krzyslaw im Beitrag #5285

---

Hi

I have a problem. I wanted to update my ME FW but after following the guide from first page me analyzer is showing me.

Note: File size exceeds firmware, unneeded padding!

I have been always following the guide and this is not the first time I am preparing me fw update with FIT but this the first time I recieved this error.

With latest Intel (R) Flash Image Tool. Version: 14.0.36.1158 from repo I wanted to merge following FWs to make an update on my laptop with HM470 platform with 10th gen i7 cpu
CSE ME 14.1.51.1517
PMC 140.2.01.1015
PCHC 14.0.0.7002

Could someone help me with this? With ME from 14.0.36 branch I have no problem but with 14.1 it is giving me the above note about padding.

One finding: I don't have this note in me analyzer when I use ME FW that is rgn but when I use extr versions I have the above note.

Best regards

---

So this note is harmless and it is good to go, thanks.

Zitat von ibsajc im Beitrag #5286

---

Zitat von Krzyslaw im Beitrag #5285

---

Hi

I have a problem. I wanted to update my ME FW but after following the guide from first page me analyzer is showing me.

Note: File size exceeds firmware, unneeded padding!

I have been always following the guide and this is not the first time I am preparing me fw update with FIT but this the first time I recieved this error.

With latest Intel (R) Flash Image Tool. Version: 14.0.36.1158 from repo I wanted to merge following FWs to make an update on my laptop with HM470 platform with 10th gen i7 cpu
CSE ME 14.1.51.1517
PMC 140.2.01.1015
PCHC 14.0.0.7002

Could someone help me with this? With ME from 14.0.36 branch I have no problem but with 14.1 it is giving me the above note about padding.

One finding: I don't have this note in me analyzer when I use ME FW that is rgn but when I use extr versions I have the above note.

Best regards

---

Update ME Firmware - MSI GF63 8RD
Update ME Firmware - MSI GF63 8RD (2)
Update ME Firmware - MSI GF63 8RD (2)

---

https://www.pcworld.com/article/3535335/...-processor.html

can someone please help me to find drivers for Msi GP75 Leopard 10sfk-074ca ? I installed windows 7 but can not find the drivers!
Please help.

@ plutomaniac

"Error 201: [FPTW64.exe] cannot be run on the current platform. Please contact your vendor." The only way I can provoke such a message is to use ME tools of a different main- version. Is there anything else that can cause this error?

Background:
Got a thread with a FUJITSU SIEMENS ESPRIMO P720 E90+ MI5W, bios R1.47.0, dated 08/26/2019, asked for NVME mod. Haswell system, Q85. Unreliable? dump provided with ME 9.1.45.3000, same version as in stock bios. Asked owner to use fpt 9.1 for spi information and backup of bios region but he claims that this gives an error 201.

Screendump of error in #25 Modding BIOS su FUJITSU SIEMENS ESPRIMO P720 E90+ MI5W (2)
Link to bios dump https://www.dropbox.com/s/fm2y2059pm6eyj...ujitsu.Bin?dl=0
Link to stock bios https://support.ts.fujitsu.com/IndexDown...C0-693926A9194E

Zitat von lfb6 im Beitrag #5293

---

Got a thread with a FUJITSU SIEMENS ESPRIMO P720 E90+ MI5W, bios R1.47.0, dated 08/26/2019, asked for NVME mod. Haswell system, B85.

---

Zitat von lfb6 im Beitrag #5293

---

Asked owner to use fpt 9.1 for spi information and backup of bios region but he claims that this gives an error 201.

---

Thanks- Q85, yes! Transfer error, corrected, but doesn't change conditions for question.

Thought of MEInfo, but that requires correct version, too, and if the user runs MEInfo on different system, too, it won't help either.