Intel Management Engine Driver 2033.15.0.1783
Support: ME10-ME15

Hello,
Which version would you recommend to download for "Asus Zenbook Flip 14 i7 8550u Intel UHD Graphics 620 "?

i am having a sleep mode problem. the device falls into deep sleep.

@plutomaniac - Which PCHC CMP FW is newer, and do you have latest, since both versions in repo package and this thread are latest=No
CMP_14.0.0.7001_PRD
CMP_14.0.0.1002_PRD << by "Date" in MEA, this looks to be newer than above, but still latest=No?

According to #5111: 7002 = 1002 (7002 latest rearding to MEA.dat: 'Latest_PCHCCMP_140__14.0.0.7002'

Zitat von plutomaniac im Beitrag #5111

---

Ok, this is due to Intel stupidity. PCHC 14.0.0.1002 and 14.0.0.7002 are identical. The difference is that Builds 7xxx are Engineering ones. ....

---

@lfb6 - Thanks, I looked back a page or two, but I guess I scrolled past and missed that! However, I was asking about 7001/1002 but I guess this still means same/same and 7001 would = 1001
There is no instructions inside the PCHC archive (nor is 7002), so not sure what he meant there, or what to do from my end manually with FITc?
I guess that does not matter I just need to update it to >> 14.0.0.1002... Correct? If yes, why does this file not have "latest" flag in MEA, actually neither do?
* Edit - I went ahead with manual update via FITc to 1002 (from 7001), looks good I guess, but still don't like seeing this is not "latest"

I just downloaded the PCHC archive (R2) right before I made that post above, no txt file in there, nor any 7002 file either?
Did you update it after I made post #5120? * Edit, I just downloaded again to check, it's still same/same, no 7002 or ReadMe txt file So your package image above is not the contents linked on the repo thread
* Edit - Derp! I guess I should have looked at your image closer, I need to grab the 1002 package from this thread


So, did I make correct manual update move, from 7001 >> 1002 via FITc, and it's OK for us to do manually since we don't have to worry about FW Update tool restrictions?
MEA does not show either 1002 as latest, can't comment on 7002 since I don't have it

* Edit - So, 7002 is latest per MEA but 1002 is not?? Which should we use, when original is 7001 and doing manual clean/UPD for users via FITc, or since they are 100% same/same, does not not matter in such cases?
This not covered precisely enough in txt, for users who are updating via FITc

Thanks for the detailed info, I guess I will have to remake those BIOS then, I didn't think about your last point being a possible issue!

Thanks, done! So it's that simple, just replace one block, no checksum or anything needs fixed?
I had three BIOS made, but was just going to redo one, pull the FW and swap into the other two, but yeah this is much easier

Thanks - Everything looks OK except I see this >> Hash of Uncompressed module "pavp" is UNKNOWN
I also see in pre-edit file too, so must be normal/expected