Zitat von zanca.racing im Beitrag #515

---

I don't know which device don't work! The pc works perfectly!

---

Zitat von zanca.racing im Beitrag #507

---

Hi. I have a big problem with my board Asrock X79 Extreme 11. I'm going to format my pc and reinstall the driver but when I install the Intel Management Engine I have allways this problem:

Impossible to start up the device. Code 10

---

Zitat von zanca.racing

---

Zitat von Fernando

---

2. Have you ever tried to update the Intel ME Firmware? If yes, has it been successful?

---

I try from DOS; I made a bootable pen and with the file that you tell me to download I try to upgrade but the result is the same error!!!

---

I have neither recommended to update the Intel ME Firmware nor given you any link to a special Intel ME Firmware version.
My advice was to uninstall the yellow marked device from within the Device Manager, to reboot and to reinstall the Intel ME driver.
When you asked me, if it is possible to update the Intel ME Firmware, I answered: It is possible, but the first step is to check the currently working Intel ME Firmware. That is why I gave you the advice to run the Intel MEInfo tool.

Zitat von zanca.racing im Beitrag #517

---

I already uninstall the yellow marked, reboot and install intel ME 10.0.28.1006 driver------> Same result!
Ok but if MEInfo tool don't work? I think that all X79 motherboard can upgrade with the same ME firmware or not?

---

Zitat

---

Can I try to change the bios chip???

---

You can try everything, but you have to make sure, that the BIOS chip is suitable for your mainboard.
Good luck!

@ all:

Update of the Start Post
Changelog:

• new: Intel MEInfo Tool for ME10 systems v10.0.25.1048 dated 06/25/2014
• new: Intel ME FWUpdate Tools for ME10 1.5M systems v10.0.25.1048 dated 06/25/2014
• new: Intel ME Firmware for ME10 1.5M systems v10.0.25.1048 dated 06/25/2014

It is for mobile only, from FITC, Intel LP Chipsets:
Premium Mobile, Mainstream Mobile, Premium BDW U Mobile, Base BDW U Mobile & Premium BDW Y Mobile.

So for Broadwell, and it seems it may work with 9-series mobile and NUC that now have 9.5 FW (Premium & Mainstream Mobile), 9.5.x FW load without error in FITC, 9.1.x gives error.

@ pacman:
Thanks for your comment regarding the systems, which may be supported by the newest Intel ME10 tools and the new Intel ME Firmware v10.0.xx.xxxx.
Meanwhile I have added a link to your post to the start post of this thread.

@ all:
If anyone should try to flash the new Intel ME Firmware v10.0.xx.xxxx, please give us your feedback regarding the result, but don't forget to mention the most important informations about your system (name of the mobile/desktop device, chipset, CPU generation).
Thanks in advance!

@Fernando

Have you kept any older 6 series ME tools (for ME v7 series)? I'm looking mostly for the latest DOS & WIN counterparts of FWUpdLcl, MeManuf & MeInfo. Yes I have checked the first post of course. ;)

@ plutomaniac:

Within the start post you can find the latest Intel MEInfo tool and the latest Firmware Updates for ME7 systems (1.5M/5M).
What are you missing?

I am looking for the DOS versions of FWUpdLcl, MeInfo & MeManuf. The pack includes the Windows-based tools, that's why I said that I saw the first topic.

Zitat von plutomaniac im Beitrag #525

---

I am looking for the DOS versions of FWUpdLcl, MeInfo & MeManuf.

---

They are, I have all three of them at v7.1.20.1197 versions. The Windows ones are more recent like 7.1.52, 7.1.50 etc. Anyway, thank you for replying Fernando.

Zitat von plutomaniac im Beitrag #527

---

They are, I have all three of them at v7.1.20.1197 versions.

---

They work but they are older. I remember reading an Intel revision pdf mentioning that MeInfo before 7.1.30 or something was reporting some stuff wrong. The Windows version I found is the 7.1.50 or 52 so it should be ok. But not the DOS version. This is just an example of why I'm generally looking for the more "updated" versions of them even if they work. A more extreme example would be the fact that Intel FITC v7.1.20.1197 cannot rebuild BIOS images without corrupting them on 6-series systems as reported at other forums. Unfortunately it's the only leaked version of FITC v7.1 that I know of and it's flawed so it can only be used for reading info unless you want a bricked motherboard.

Check this: Intel Management Engine: Drivers, Firmware and Tools (4)