Forum - RE: Intel Management Engine: Drivers, Firmware & System Tools

#4786 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Sun Feb 02, 2020 2:30 pm

@pustekuchencake:
Why don't you do what the tool recommends?
Run the Manuf tool with the suffix " -verbose".

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#4787 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Sun Feb 02, 2020 6:08 pm (Last edited: Sun Feb 02, 2020 6:13 pm)

I don't know why. Here is it:

Copyright(C) 2005 - 2011, Intel Corporation. All rights reserved.

MEManuf Test Done
Use -R option to get results

C:\IME\Intel ME System Tools v7 r2\MEManuf\WIN64>MEManufWin64.exe -VERBOSE

Intel(R) MEManuf Version: 7.1.50.1166
Copyright(C) 2005 - 2011, Intel Corporation. All rights reserved.

Platform stepping value is 4

FW Status Register1: 0x1E000245
FW Status Register2: 0x68000006

CurrentState: Normal
ManufacturingMode: Disabled
FlashPartition: Valid
OperationalState: M0 with UMA
InitComplete: Complete
BUPLoadState: Success
ErrorCode: No Error
ModeOfOperation: Normal
ICC: Valid OEM data, ICC programmed

Get FWU info command...done

Get FWU version command...done

Get FWU feature state command...done

Get ME FWU platform type command...done

Get ME FWU feature capability command...done
Feature enablement is 0xDF65C65
gFeatureAvailability value is 0x1
OEM ICC data valid and programmed correctly

Request Intel(R) ME test result command...done
vsccommn.bin was created on 04:35:50 08/08/2012 GMT
SPI Flash ID #1 ME VSCC value is 0x2005
SPI Flash ID #1 (ID: 0xEF4017) ME VSCC value checked
SPI Flash ID #1 BIOS VSCC value is 0x2005
SPI Flash ID #1 (ID: 0xEF4017) BIOS VSCC value checked
SPI Flash ID #2 ME VSCC value is 0x2005
SPI Flash ID #2 (ID: 0xEF4015) ME VSCC value checked
SPI Flash ID #2 BIOS VSCC value is 0x2005
SPI Flash ID #2 (ID: 0xEF4015) BIOS VSCC value checked
FPBA value is 0x800
Found an Intel Wireless device

Get Intel(R) ME test data command...done
Total of 33 Intel(R) ME test result retrieved
Micro Kernel - Blob Manager: Set - Passed
Micro Kernel - Blob Manager: Get - Passed
Micro Kernel - Blob Manager: Remove - Passed
Policy Kernel - SMBus: Read byte - Passed
Policy Kernel - ME Password: Valid MEBx password - Passed
Policy Kernel - Power Package: Package 1 supported - Passed
Policy Kernel - Power Package: Default package supported - Passed
Policy Kernel - ME Configuration: Wlan Power Well - Passed
Policy Kernel - ME Configuration: CPU Missing Logic - Passed
Policy Kernel - ME Configuration: M3 Power Rails Available - Passed
Policy Kernel - Embedded Controller: Get power source - Passed
MCTP - General: Connectivity to 3G using SMT1 - Failed
No error information for this application
MCTP - General: Connectivity to EC using SMT3 - Passed
Common Services - General: Low power idle timeout - Passed
Common Services - Provisioning: Valid MEBX password change policy - Passed
Common Services - Provisioning: Client Config mode is valid - Passed
Common Services - General: Vlan not enabled on mobile - Passed
Common Services - Provisioning: Both PID and PPS are set - Passed
Common Services - Provisioning: MEBX password set when PID and PPS set - Passed
Common Services - Wireless LAN: Connectivity to NIC - Passed
AMT - Privacy Level: Valid Privacy Level settings - Passed
AMT - Power: Valid WLAN power well (Mobile) - Passed
AMT - Power: WLAN enabled on mobile - Passed
AMT - Power: Power-package 2 supported - Passed
AMT - KVM: USBr is enabled when KVM is enabled - Passed
AMT - EC: Basic connectivity - Passed
AMT - Hardware Inventory: BIOS tables - Passed
AMT - KVM: Compare engine - Passed
AMT - KVM: Compression engine - Passed
AMT - KVM: Sampling engine - Skipped
AMT - KVM: VDM engine - Passed
AMT - USBr: Hardware - Passed
Policy Kernel - Power Package: Live Heap Test - Passed

Error 9314: Intel(R) ME test result reports error(s)

Clear Intel(R) ME test data command...done

Error 9296: MEManuf Test Failed (9314)

reply

#4788 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Sun Feb 02, 2020 8:25 pm

Did the update. Laptop looks find so far!

reply

#4789 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Sun Feb 02, 2020 8:29 pm

@pustekuchencake:
You should not look onto your laptop, but check the updated Intel ME components by running the MEManuf tool with the " -verbose" suffix.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#4790 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Wed Feb 05, 2020 7:26 am (Last edited: Sat Feb 08, 2020 1:48 pm)

Zitat von Fernando im Beitrag #4784
@gizmo28:
After having flashed any Intel (CS)ME Firmware for your specific mainboard/system, you can find out the results yourself by running the appropriate Intel ME System Tools MEInfo and MEManuf (to get a detailed report with the suffix " -verbose"). Please look into the start post.

Im not sure if i put the 2 parts together properly, which why i asked here, wouldn't i end up having a bricked mobo if i flash it first? I'm not asking anyone to do for it me, just for someone to just check the files in fit to if i followed guide properly before i try to continue with the flashing part and moving on to what you said.

reply

#4791 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Sat Feb 08, 2020 12:17 pm (Last edited: Sat Feb 08, 2020 1:49 pm)

@Fernando : Ok, I processed the command(s) but the strange error (when I use -R command) remains:

C:\WINDOWS\system32>cd C:\IME\Intel ME System Tools v7 r2\MEManuf\WIN64

C:\IME\Intel ME System Tools v7 r2\MEManuf\WIN64>MEManufWin64.exe -VERBOSE

Intel(R) MEManuf Version: 7.1.50.1166
Copyright(C) 2005 - 2011, Intel Corporation. All rights reserved.

Platform stepping value is 4

FW Status Register1: 0x1E000245
FW Status Register2: 0x60000006

CurrentState: Normal
ManufacturingMode: Disabled
FlashPartition: Valid
OperationalState: M0 with UMA
InitComplete: Complete
BUPLoadState: Success
ErrorCode: No Error
ModeOfOperation: Normal
ICC: Valid OEM data, ICC programmed

Get FWU info command...done

Get FWU version command...done

Get FWU feature state command...done

Get ME FWU platform type command...done

Get ME FWU feature capability command...done
Feature enablement is 0xDF65C61
gFeatureAvailability value is 0x1
OEM ICC data valid and programmed correctly

Request Intel(R) ME test result command...done
vsccommn.bin was created on 04:35:50 08/08/2012 GMT
SPI Flash ID #1 ME VSCC value is 0x2005
SPI Flash ID #1 (ID: 0xEF4017) ME VSCC value checked
SPI Flash ID #1 BIOS VSCC value is 0x2005
SPI Flash ID #1 (ID: 0xEF4017) BIOS VSCC value checked
SPI Flash ID #2 ME VSCC value is 0x2005
SPI Flash ID #2 (ID: 0xEF4015) ME VSCC value checked
SPI Flash ID #2 BIOS VSCC value is 0x2005
SPI Flash ID #2 (ID: 0xEF4015) BIOS VSCC value checked
FPBA value is 0x800
Found an Intel Wireless device

Request Intel(R) ME Full BIST test command...done

MEManuf Test Done
Use -R option to get results

C:\IME\Intel ME System Tools v7 r2\MEManuf\WIN64>MEManufWin64.exe -R

Intel(R) MEManuf Version: 7.1.50.1166
Copyright(C) 2005 - 2011, Intel Corporation. All rights reserved.

Error 9296: MEManuf Test Failed (9314)
Use <VERBOSE> option for more details

C:\IME\Intel ME System Tools v7 r2\MEManuf\WIN64>MEManufWin64.exe -VERBOSE

Intel(R) MEManuf Version: 7.1.50.1166
Copyright(C) 2005 - 2011, Intel Corporation. All rights reserved.

Platform stepping value is 4

FW Status Register1: 0x1E000245
FW Status Register2: 0x68000006

CurrentState: Normal
ManufacturingMode: Disabled
FlashPartition: Valid
OperationalState: M0 with UMA
InitComplete: Complete
BUPLoadState: Success
ErrorCode: No Error
ModeOfOperation: Normal
ICC: Valid OEM data, ICC programmed

Get FWU info command...done

Get FWU version command...done

Get FWU feature state command...done

Get ME FWU platform type command...done

Get ME FWU feature capability command...done
Feature enablement is 0xDF65C61
gFeatureAvailability value is 0x1
OEM ICC data valid and programmed correctly

Request Intel(R) ME test result command...done
vsccommn.bin was created on 04:35:50 08/08/2012 GMT
SPI Flash ID #1 ME VSCC value is 0x2005
SPI Flash ID #1 (ID: 0xEF4017) ME VSCC value checked
SPI Flash ID #1 BIOS VSCC value is 0x2005
SPI Flash ID #1 (ID: 0xEF4017) BIOS VSCC value checked
SPI Flash ID #2 ME VSCC value is 0x2005
SPI Flash ID #2 (ID: 0xEF4015) ME VSCC value checked
SPI Flash ID #2 BIOS VSCC value is 0x2005
SPI Flash ID #2 (ID: 0xEF4015) BIOS VSCC value checked
FPBA value is 0x800
Found an Intel Wireless device

Request Intel(R) ME Full BIST test command...done

MEManuf Test Done
Use -R option to get results

C:\IME\Intel ME System Tools v7 r2\MEManuf\WIN64>MEManufWin64.exe -R

Intel(R) MEManuf Version: 7.1.50.1166
Copyright(C) 2005 - 2011, Intel Corporation. All rights reserved.

Error 9296: MEManuf Test Failed (9314)
Use <VERBOSE> option for more details

C:\IME\Intel ME System Tools v7 r2\MEManuf\WIN64>

reply

#4792 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Sat Feb 08, 2020 1:52 pm

@pustekuchencake: Our expert for the Intel ME System Tools is plutomaniac. If you want an answer, you should wait for him.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#4793 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Sat Feb 08, 2020 1:56 pm (Last edited: Sat Feb 08, 2020 1:57 pm)

Zitat von pustekuchencake im Beitrag #4791
@Fernando : Ok, I processed the command(s) but the strange error (when I use -R command) remains:

C:\IME\Intel ME System Tools v7 r2\MEManuf\WIN64>MEManufWin64.exe -R
Intel(R) MEManuf Version: 7.1.50.1166
Copyright(C) 2005 - 2011, Intel Corporation. All rights reserved.
Error 9296: MEManuf Test Failed (9314)
Use <VERBOSE> option for more details

The r- option is meant to retrieve results stored in the firmware, possibly after -S4 and -S5 tests

Why don't you do as asked for by the software? Run "MEManufWin64.exe -R -verbose" and you'll get an explanation.....

For my (non-AMT) laptop it gives me:
Error 9313: No Intel (R) ME test result to retrieve
Error 9296: MEManuf Test Failed (9313)

Did you cut the result of "MEManufWin64.exe -verbose"? There are lines missing, I think?

reply

#4794 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Sat Feb 08, 2020 9:27 pm (Last edited: Sat Feb 08, 2020 9:42 pm)

@Fernando : OK, I will wait.

@lfb6 : Keep cool. I didn't knew that I can combine these commands (obviously Fernando also). Btw: No, I didn't remove anything from the results� the results of the commands are completely listed.
I combined it now and I'm not much more clever than before:

Microsoft Windows [Version 10.0.18363.628]
(c) 2019 Microsoft Corporation. Alle Rechte vorbehalten.

C:\Windows\system32>cd C:\Intel ME System Tools v7 r2\MEManuf\WIN64

C:\Intel ME System Tools v7 r2\MEManuf\WIN64>MEManufWin64.exe -R -VERBOSE

Intel(R) MEManuf Version: 7.1.50.1166
Copyright(C) 2005 - 2011, Intel Corporation. All rights reserved.

Platform stepping value is 4

FW Status Register1: 0x1E000245
FW Status Register2: 0x69000006

CurrentState: Normal
ManufacturingMode: Disabled
FlashPartition: Valid
OperationalState: M0 with UMA
InitComplete: Complete
BUPLoadState: Success
ErrorCode: No Error
ModeOfOperation: Normal
ICC: Valid OEM data, ICC programmed

Get FWU info command...done

Get FWU version command...done

Get FWU feature state command...done

Get ME FWU platform type command...done

Get ME FWU feature capability command...done
Feature enablement is 0xDF65C61
gFeatureAvailability value is 0x1
OEM ICC data valid and programmed correctly

Request Intel(R) ME test result command...done
vsccommn.bin was created on 04:35:50 08/08/2012 GMT
SPI Flash ID #1 ME VSCC value is 0x2005
SPI Flash ID #1 (ID: 0xEF4017) ME VSCC value checked
SPI Flash ID #1 BIOS VSCC value is 0x2005
SPI Flash ID #1 (ID: 0xEF4017) BIOS VSCC value checked
SPI Flash ID #2 ME VSCC value is 0x2005
SPI Flash ID #2 (ID: 0xEF4015) ME VSCC value checked
SPI Flash ID #2 BIOS VSCC value is 0x2005
SPI Flash ID #2 (ID: 0xEF4015) BIOS VSCC value checked
FPBA value is 0x800
Found an Intel Wireless device

Error 9313: No Intel(R) ME test result to retrieve

Error 9296: MEManuf Test Failed (9313)

C:\Intel ME System Tools v7 r2\MEManuf\WIN64>MEManufWin64.exe -R -VERBOSE

Intel(R) MEManuf Version: 7.1.50.1166
Copyright(C) 2005 - 2011, Intel Corporation. All rights reserved.

Platform stepping value is 4

FW Status Register1: 0x1E000245
FW Status Register2: 0x69000006

CurrentState: Normal
ManufacturingMode: Disabled
FlashPartition: Valid
OperationalState: M0 with UMA
InitComplete: Complete
BUPLoadState: Success
ErrorCode: No Error
ModeOfOperation: Normal
ICC: Valid OEM data, ICC programmed

Get FWU info command...done

Get FWU version command...done

Get FWU feature state command...done

Get ME FWU platform type command...done

Get ME FWU feature capability command...done
Feature enablement is 0xDF65C61
gFeatureAvailability value is 0x1
OEM ICC data valid and programmed correctly

Request Intel(R) ME test result command...done
vsccommn.bin was created on 04:35:50 08/08/2012 GMT
SPI Flash ID #1 ME VSCC value is 0x2005
SPI Flash ID #1 (ID: 0xEF4017) ME VSCC value checked
SPI Flash ID #1 BIOS VSCC value is 0x2005
SPI Flash ID #1 (ID: 0xEF4017) BIOS VSCC value checked
SPI Flash ID #2 ME VSCC value is 0x2005
SPI Flash ID #2 (ID: 0xEF4015) ME VSCC value checked
SPI Flash ID #2 BIOS VSCC value is 0x2005
SPI Flash ID #2 (ID: 0xEF4015) BIOS VSCC value checked
FPBA value is 0x800
Found an Intel Wireless device

Error 9313: No Intel(R) ME test result to retrieve

Error 9296: MEManuf Test Failed (9313)

C:\Intel ME System Tools v7 r2\MEManuf\WIN64>MEManufWin64.exe -VERBOSE -R

Intel(R) MEManuf Version: 7.1.50.1166
Copyright(C) 2005 - 2011, Intel Corporation. All rights reserved.

Platform stepping value is 4

FW Status Register1: 0x1E000245
FW Status Register2: 0x69000006

CurrentState: Normal
ManufacturingMode: Disabled
FlashPartition: Valid
OperationalState: M0 with UMA
InitComplete: Complete
BUPLoadState: Success
ErrorCode: No Error
ModeOfOperation: Normal
ICC: Valid OEM data, ICC programmed

Get FWU info command...done

Get FWU version command...done

Get FWU feature state command...done

Get ME FWU platform type command...done

Get ME FWU feature capability command...done
Feature enablement is 0xDF65C61
gFeatureAvailability value is 0x1
OEM ICC data valid and programmed correctly

Request Intel(R) ME test result command...done
vsccommn.bin was created on 04:35:50 08/08/2012 GMT
SPI Flash ID #1 ME VSCC value is 0x2005
SPI Flash ID #1 (ID: 0xEF4017) ME VSCC value checked
SPI Flash ID #1 BIOS VSCC value is 0x2005
SPI Flash ID #1 (ID: 0xEF4017) BIOS VSCC value checked
SPI Flash ID #2 ME VSCC value is 0x2005
SPI Flash ID #2 (ID: 0xEF4015) ME VSCC value checked
SPI Flash ID #2 BIOS VSCC value is 0x2005
SPI Flash ID #2 (ID: 0xEF4015) BIOS VSCC value checked
FPBA value is 0x800
Found an Intel Wireless device

Error 9313: No Intel(R) ME test result to retrieve

Error 9296: MEManuf Test Failed (9313)

C:\Intel ME System Tools v7 r2\MEManuf\WIN64>MEManufWin64.exe -VERBOSE

Intel(R) MEManuf Version: 7.1.50.1166
Copyright(C) 2005 - 2011, Intel Corporation. All rights reserved.

Platform stepping value is 4

FW Status Register1: 0x1E000245
FW Status Register2: 0x69000006

CurrentState: Normal
ManufacturingMode: Disabled
FlashPartition: Valid
OperationalState: M0 with UMA
InitComplete: Complete
BUPLoadState: Success
ErrorCode: No Error
ModeOfOperation: Normal
ICC: Valid OEM data, ICC programmed

Get FWU info command...done

Get FWU version command...done

Get FWU feature state command...done

Get ME FWU platform type command...done

Get ME FWU feature capability command...done
Feature enablement is 0xDF65C61
gFeatureAvailability value is 0x1
OEM ICC data valid and programmed correctly

Request Intel(R) ME test result command...done
vsccommn.bin was created on 04:35:50 08/08/2012 GMT
SPI Flash ID #1 ME VSCC value is 0x2005
SPI Flash ID #1 (ID: 0xEF4017) ME VSCC value checked
SPI Flash ID #1 BIOS VSCC value is 0x2005
SPI Flash ID #1 (ID: 0xEF4017) BIOS VSCC value checked
SPI Flash ID #2 ME VSCC value is 0x2005
SPI Flash ID #2 (ID: 0xEF4015) ME VSCC value checked
SPI Flash ID #2 BIOS VSCC value is 0x2005
SPI Flash ID #2 (ID: 0xEF4015) BIOS VSCC value checked
FPBA value is 0x800
Found an Intel Wireless device

Request Intel(R) ME Full BIST test command...done

MEManuf Test Done
Use -R option to get results

C:\Intel ME System Tools v7 r2\MEManuf\WIN64>MEManufWin64.exe -VERBOSE -R

Intel(R) MEManuf Version: 7.1.50.1166
Copyright(C) 2005 - 2011, Intel Corporation. All rights reserved.

Platform stepping value is 4

FW Status Register1: 0x1E000245
FW Status Register2: 0x68000006

CurrentState: Normal
ManufacturingMode: Disabled
FlashPartition: Valid
OperationalState: M0 with UMA
InitComplete: Complete
BUPLoadState: Success
ErrorCode: No Error
ModeOfOperation: Normal
ICC: Valid OEM data, ICC programmed

Get FWU info command...done

Get FWU version command...done

Get FWU feature state command...done

Get ME FWU platform type command...done

Get ME FWU feature capability command...done
Feature enablement is 0xDF65C61
gFeatureAvailability value is 0x1
OEM ICC data valid and programmed correctly

Request Intel(R) ME test result command...done
vsccommn.bin was created on 04:35:50 08/08/2012 GMT
SPI Flash ID #1 ME VSCC value is 0x2005
SPI Flash ID #1 (ID: 0xEF4017) ME VSCC value checked
SPI Flash ID #1 BIOS VSCC value is 0x2005
SPI Flash ID #1 (ID: 0xEF4017) BIOS VSCC value checked
SPI Flash ID #2 ME VSCC value is 0x2005
SPI Flash ID #2 (ID: 0xEF4015) ME VSCC value checked
SPI Flash ID #2 BIOS VSCC value is 0x2005
SPI Flash ID #2 (ID: 0xEF4015) BIOS VSCC value checked
FPBA value is 0x800
Found an Intel Wireless device

Get Intel(R) ME test data command...done
Total of 32 Intel(R) ME test result retrieved
Micro Kernel - Blob Manager: Set - Passed
Micro Kernel - Blob Manager: Get - Passed
Micro Kernel - Blob Manager: Remove - Passed
Policy Kernel - SMBus: Read byte - Passed
Policy Kernel - ME Password: Valid MEBx password - Passed
Policy Kernel - Power Package: Package 1 supported - Passed
Policy Kernel - Power Package: Default package supported - Passed
Policy Kernel - ME Configuration: Wlan Power Well - Passed
Policy Kernel - ME Configuration: CPU Missing Logic - Passed
Policy Kernel - ME Configuration: M3 Power Rails Available - Passed
Policy Kernel - Embedded Controller: Get power source - Passed
MCTP - General: Connectivity to 3G using SMT1 - Failed
No error information for this application
MCTP - General: Connectivity to EC using SMT3 - Passed
Common Services - General: Low power idle timeout - Passed
Common Services - Provisioning: Valid MEBX password change policy - Passed
Common Services - Provisioning: Client Config mode is valid - Passed
Common Services - General: Vlan not enabled on mobile - Passed
Common Services - Provisioning: Both PID and PPS are set - Passed
Common Services - Provisioning: MEBX password set when PID and PPS set - Passed
Common Services - Wireless LAN: Connectivity to NIC - Passed
AMT - Privacy Level: Valid Privacy Level settings - Passed
AMT - Power: Valid WLAN power well (Mobile) - Passed
AMT - Power: WLAN enabled on mobile - Passed
AMT - Power: Power-package 2 supported - Passed
AMT - KVM: USBr is enabled when KVM is enabled - Passed
AMT - EC: Basic connectivity - Passed
AMT - KVM: Compare engine - Passed
AMT - KVM: Compression engine - Passed
AMT - KVM: Sampling engine - Passed
AMT - KVM: VDM engine - Passed
AMT - USBr: Hardware - Passed
Policy Kernel - Power Package: Live Heap Test - Passed

Error 9314: Intel(R) ME test result reports error(s)

Clear Intel(R) ME test data command...done

Error 9296: MEManuf Test Failed (9314)

C:\Intel ME System Tools v7 r2\MEManuf\WIN64>MEManufWin64.exe -VERBOSE -R

Intel(R) MEManuf Version: 7.1.50.1166
Copyright(C) 2005 - 2011, Intel Corporation. All rights reserved.

Platform stepping value is 4

FW Status Register1: 0x1E000245
FW Status Register2: 0x68000006

CurrentState: Normal
ManufacturingMode: Disabled
FlashPartition: Valid
OperationalState: M0 with UMA
InitComplete: Complete
BUPLoadState: Success
ErrorCode: No Error
ModeOfOperation: Normal
ICC: Valid OEM data, ICC programmed

Get FWU info command...done

Get FWU version command...done

Get FWU feature state command...done

Get ME FWU platform type command...done

Get ME FWU feature capability command...done
Feature enablement is 0xDF65C61
gFeatureAvailability value is 0x1
OEM ICC data valid and programmed correctly

Request Intel(R) ME test result command...done
vsccommn.bin was created on 04:35:50 08/08/2012 GMT
SPI Flash ID #1 ME VSCC value is 0x2005
SPI Flash ID #1 (ID: 0xEF4017) ME VSCC value checked
SPI Flash ID #1 BIOS VSCC value is 0x2005
SPI Flash ID #1 (ID: 0xEF4017) BIOS VSCC value checked
SPI Flash ID #2 ME VSCC value is 0x2005
SPI Flash ID #2 (ID: 0xEF4015) ME VSCC value checked
SPI Flash ID #2 BIOS VSCC value is 0x2005
SPI Flash ID #2 (ID: 0xEF4015) BIOS VSCC value checked
FPBA value is 0x800
Found an Intel Wireless device

Error 9313: No Intel(R) ME test result to retrieve

Error 9296: MEManuf Test Failed (9313)

C:\Intel ME System Tools v7 r2\MEManuf\WIN64>

PS: I triggered the commands not only once ;-)

reply

#4795 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Sat Feb 08, 2020 9:39 pm (Last edited: Sat Feb 08, 2020 10:00 pm)

Try running "MEManufWin64.exe -VERBOSE -no3G" Seems your ME is configured 'with' 3G card. Seems to be a feature of (superseded) Intel Anti Theft Technology.

You might open your bios in FTIC and look for the setting 'Descriptor image'-PCH Straps' - 'PCH strap 2' - ''Intel® ME SMBus MCTP Address Enable": true = Using Intel® Anti-Theft Technology with a 3G NIC

reply

#4796 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Sun Feb 09, 2020 12:13 am (Last edited: Sun Feb 09, 2020 12:14 am)

Well... probably you are Right:

Microsoft Windows [Version 10.0.18363.628]
(c) 2019 Microsoft Corporation. Alle Rechte vorbehalten.

C:\Windows\system32>cd C:\Intel ME System Tools v7 r2\MEManuf\WIN64

C:\Intel ME System Tools v7 r2\MEManuf\WIN64>MEManufWin64.exe -VERBOSE -no3G

Intel(R) MEManuf Version: 7.1.50.1166
Copyright(C) 2005 - 2011, Intel Corporation. All rights reserved.

Platform stepping value is 4

FW Status Register1: 0x1E000245
FW Status Register2: 0x69000006

CurrentState: Normal
ManufacturingMode: Disabled
FlashPartition: Valid
OperationalState: M0 with UMA
InitComplete: Complete
BUPLoadState: Success
ErrorCode: No Error
ModeOfOperation: Normal
ICC: Valid OEM data, ICC programmed

Get FWU info command...done

Get FWU version command...done

Get FWU feature state command...done

Get ME FWU platform type command...done

Get ME FWU feature capability command...done
Feature enablement is 0xDF65C61
gFeatureAvailability value is 0x1
OEM ICC data valid and programmed correctly

Request Intel(R) ME test result command...done
vsccommn.bin was created on 04:35:50 08/08/2012 GMT
SPI Flash ID #1 ME VSCC value is 0x2005
SPI Flash ID #1 (ID: 0xEF4017) ME VSCC value checked
SPI Flash ID #1 BIOS VSCC value is 0x2005
SPI Flash ID #1 (ID: 0xEF4017) BIOS VSCC value checked
SPI Flash ID #2 ME VSCC value is 0x2005
SPI Flash ID #2 (ID: 0xEF4015) ME VSCC value checked
SPI Flash ID #2 BIOS VSCC value is 0x2005
SPI Flash ID #2 (ID: 0xEF4015) BIOS VSCC value checked
FPBA value is 0x800
Found an Intel Wireless device

Request Intel(R) ME Full BIST test command...done

MEManuf Test Done
Use -R option to get results

C:\Intel ME System Tools v7 r2\MEManuf\WIN64>MEManufWin64.exe -VERBOSE -no3G

Intel(R) MEManuf Version: 7.1.50.1166
Copyright(C) 2005 - 2011, Intel Corporation. All rights reserved.

Platform stepping value is 4

FW Status Register1: 0x1E000245
FW Status Register2: 0x68000006

CurrentState: Normal
ManufacturingMode: Disabled
FlashPartition: Valid
OperationalState: M0 with UMA
InitComplete: Complete
BUPLoadState: Success
ErrorCode: No Error
ModeOfOperation: Normal
ICC: Valid OEM data, ICC programmed

Get FWU info command...done

Get FWU version command...done

Get FWU feature state command...done

Get ME FWU platform type command...done

Get ME FWU feature capability command...done
Feature enablement is 0xDF65C61
gFeatureAvailability value is 0x1
OEM ICC data valid and programmed correctly

Request Intel(R) ME test result command...done
vsccommn.bin was created on 04:35:50 08/08/2012 GMT
SPI Flash ID #1 ME VSCC value is 0x2005
SPI Flash ID #1 (ID: 0xEF4017) ME VSCC value checked
SPI Flash ID #1 BIOS VSCC value is 0x2005
SPI Flash ID #1 (ID: 0xEF4017) BIOS VSCC value checked
SPI Flash ID #2 ME VSCC value is 0x2005
SPI Flash ID #2 (ID: 0xEF4015) ME VSCC value checked
SPI Flash ID #2 BIOS VSCC value is 0x2005
SPI Flash ID #2 (ID: 0xEF4015) BIOS VSCC value checked
FPBA value is 0x800
Found an Intel Wireless device

Get Intel(R) ME test data command...done
Total of 32 Intel(R) ME test result retrieved
Micro Kernel - Blob Manager: Set - Passed
Micro Kernel - Blob Manager: Get - Passed
Micro Kernel - Blob Manager: Remove - Passed
Policy Kernel - SMBus: Read byte - Passed
Policy Kernel - ME Password: Valid MEBx password - Passed
Policy Kernel - Power Package: Package 1 supported - Passed
Policy Kernel - Power Package: Default package supported - Passed
Policy Kernel - ME Configuration: Wlan Power Well - Passed
Policy Kernel - ME Configuration: CPU Missing Logic - Passed
Policy Kernel - ME Configuration: M3 Power Rails Available - Passed
Policy Kernel - Embedded Controller: Get power source - Passed
MCTP - General: Connectivity to 3G using SMT1 - Skipped
MCTP - General: Connectivity to EC using SMT3 - Passed
Common Services - General: Low power idle timeout - Passed
Common Services - Provisioning: Valid MEBX password change policy - Passed
Common Services - Provisioning: Client Config mode is valid - Passed
Common Services - General: Vlan not enabled on mobile - Passed
Common Services - Provisioning: Both PID and PPS are set - Passed
Common Services - Provisioning: MEBX password set when PID and PPS set - Passed
Common Services - Wireless LAN: Connectivity to NIC - Passed
AMT - Privacy Level: Valid Privacy Level settings - Passed
AMT - Power: Valid WLAN power well (Mobile) - Passed
AMT - Power: WLAN enabled on mobile - Passed
AMT - Power: Power-package 2 supported - Passed
AMT - KVM: USBr is enabled when KVM is enabled - Passed
AMT - EC: Basic connectivity - Passed
AMT - KVM: Compare engine - Passed
AMT - KVM: Compression engine - Passed
AMT - KVM: Sampling engine - Passed
AMT - KVM: VDM engine - Passed
AMT - USBr: Hardware - Passed
Policy Kernel - Power Package: Live Heap Test - Passed

Clear Intel(R) ME test data command...done

MEManuf Test Passed

C:\Intel ME System Tools v7 r2\MEManuf\WIN64>

reply

#4797 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Mon Feb 10, 2020 2:37 am

Any Difference between - Intel MEI drivers with their respective software & system services Vs ME driver only ,
Anynbody pls Explain....

SaHaF~
Acer NITRO VN7-592G LAP
i7-6700HQ-8GB RAM-256 GB SSD
NVIDIA GTX 960M

reply

#4798 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Mon Feb 10, 2020 9:22 am

@sahafdeen:
Somewhere within this thread plutomaniac has explained it.
Short summary: Users with a "normal" consumer PC/notebook will not really benefit from the installation of the complete installer Set.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#4799 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Tue Feb 11, 2020 12:09 am (Last edited: Tue Feb 11, 2020 12:13 am)

Wow, there's really an update for old SPS 3 Denlow!!! (Fujitsu PRIMERGY TX1320 M2 / TX1330 M2)

lfb6 has attached files to this post

SPS_3_0_7_60.zip

reply

#4800 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Tue Feb 11, 2020 8:45 am (Last edited: Tue Feb 11, 2020 8:45 am)

I screwed up and bricked my Asus p9x79 pro while trying to update my ME firmware using fptw64. I don't know what I was thinking as I have successfully updated ME using fwupl64 opposed to fptw64 which I have never used .

After the first flash and subsequent reboot using fptw64, the network card came up with yellow exclamation so I rushed and tried flashing an old ME firmware with FPT resulting in the PC turning on for one second then immediately off after the first reboot.

I cannot use bios flashback to flash my last successful bios update since this does not write to the ME region.

I am at the road now where I'm trying to figure out where to go next.
I ordered a ch341 bios programmer and am looking for some direction now that it's in my possession.

--- attached is the BIOS I was running prior to bricking along with a back up I made prior to updating ME successfully months/year before this latest incident occurred.

Any advice is greatly appreciated

Sorry for the multiple uploads I was having issues with the uploader.

Mickeytang has attached files to this post

reply

Please enter a reason for warning.