Zitat von Fernando im Beitrag #100

---

Zitat

---

I´ve been looking to update the IME Firmware on my ASUS P8Z77 WS board. What latest and newest firmware do you recomend me to update to?

---

If you want just to update the Intel ME Firmware, I recommend to use the "Intel ME 8 Consumer FWUpdate v8.1.51.1471", which you can find wthin the start post of >this< thread.

---

Can you recommend the Asus P8Z77 WS BIOS to add the possibility of using the PCI-E NVME SSD as a boot drive?

Zitat von JohnnyGui im Beitrag #4222

---

Guys, sorry if this is a dumb question but I have no clue which Intel Management Engine driver would be compatible for my device.

I have a Gigabyte Z370 HD motherboard (Z370 Chipset) with an i5-8600K CPU. The one Gigabyte's website offers is outdated. Intel's website does not offer any Intel Management Engine drivers for my device components.

Is there an official compatible IME Driver for my device?

---

They already have, but you did not bother to read. It's all detailed in the first post.

Hi,

Can someone point me to a guide that details how to prepare the ME ver 12 firmware for flashing? Seems all of a sudden it has become complicated.

Thank you

hi, can anyone enlighten me about MEI firmware & how to use or install or update them & how they're different from MEI normal software/driver exe or MSI installer

Just curious..My last flash on Asus Z270 mb was 11.8.55.3510_CON_H_D0_PRD_RGN.bin and the new flash 11.8.60.3560_CON_H_D0_PRD_EXTR.bin.I take it mine has to say RGN.bin and the EXTR.bin is not for me or is this safe to flash.Thought to ask fist before trying anything...

Thanks Fern,so the 11.8.60.3560_CON_H_D0_PRD_EXTR.bin is go to go for me...

@plutomaniac,

Trying to configure 12.0.10.1127 for flashing and have a couple questions if you don't mind:

1. The instructions said that you need to input the PMC Region binary into the ME with FIT at the Intel(R) Me and Pmc Region > PMC Binary File step. So I decomposed my full bios file provided by the manufacturer of my mainboard with FIT and used 'PMC Region.bin' as the input file in 12.0.10.1127 using FIT. Is that correct because the resulting ME file according to ME analyzer doesn't have the latest PMC ?

2. Opening up 12.0.10.1127 in Fit resulted in these errors:
Warning: Invalid value specified for "GbE PCIe Port Select": Port13, reverting to previous/default value: Port 13
Warning: Invalid value specified for "eSPI / EC Slave Attached Flash Multiple Outstanding Requests Enable": Single, reverting to previous/default value: Single Outstanding Request
Warning: Invalid value specified for "eSPI / EC Slave Attached Flash Channel OOO Enable": In Order, reverting to previous/default value: In-Order SAF Requests
Warning: Invalid value specified for "USB2 DbC port enable": No USB3 Ports, reverting to previous/default value: No USB2 Ports
Warning: Invalid value specified for "Intel(R) Precise Touch and Stylus Controller 1 Maximum Frequency": 30MHz, reverting to previous/default value: 30 MHz


So I changed each one to match what there was in my original bios file changing port 13 to port 5 for example. Is that correct?

After that I followed the rest of the instructions changing the top detail to Intel ConnonLake H Series - Z390 and number of flash components to 0 and built the ME rom file.

Am I ready to flash? I am attaching my final file for review. Change extension from .doc to .bin.

Thank you.

Edit: Found the list of newer PMC files and used the newer one instead. Attached my final final rom file:

Thank you

@plutomaniac,

I guess I'm going to go for it then. Wish me luck..

Thanks