After ME_cleaner with flag -S - lock bclk and 99.8mhz bus on z97. Any solutioins?

Cleanes some parts of ME and add Disable bit. What are you speaking for? You recomend not use this stuff?

Hi there guys and girls , i'm new to this forum and i've been a follower especially for the region files and the flash tools , i work on a electronic laboratory specially more into laptop and fones and i do this for quiet few years allready , and i've been cleaning many regions for many machines for a long time until yesterday where something happened and that intrigued me so since i notice there is here some great minds on the codding so here it is my question

i got here a toshiba ~P50 MBR version VGSG mb rev 2.1 and i'm having issues with the region due to the delay between display image after turn on (usually lapse of 16 seconds ) so cheking region on my computer it shows me it is version 9.0.20.1447

so i open FITC version 9.0.21.1452 and i do what i usually do , i add the bios to the fitc go to MEregion and select the region that is suposed to be on that file in this case 9.0.20.1447 and the oddest thing is that it usually create and outimage .bin with the correct megabytes sizes ,,,but specially with this bios or machine FITC is creating me 3 dumps .,.. (for ex the region bios on this machine is the 2mb file ) so it create one files of 2mb another of 4mb and a third of 6.144mb knowing that the suposed correct is the 2mb file even if i solder it again to the board well then it wont display image at all (just like if bios got damaged or something ) and i've done this hundreds of times and never had issues , perhaps something is missing me , but that completely weird , anyone can explain why is that happening ? and wich other infos do you need ?

PCH is a HM86 sr17e
i apreciate some explanation :)

cheer and thk for that very good site

thk for your quick reply plutomaniac

if i try to use a more recent tool FITC in this case it will display error saying not possible .im not a expert in software coding merging area , about electronics well ask me anyting , software is my worst part unfortunetly

yes the machine has 2 bios usually one with 2 mb and another with 4 mb , so my question is how can i clean the region on this one ? first of all i flash bios with outisde programmer like TL866cs and others , so i got here both dump 2mb and 4 mb

so resuming you say i should flash to the bios both files , the 2mb files to the 16bv bios and the 4mb files to the 32bv rom (the ones that FIT create ) ?

reading well your post it makes not much sense to me , the 4mb file , how does fit knows the entire contente of the 4mb bios ? and how fit can from a 2mb orighinal bios mais + 1.5mb region file , create both bios for the computer , EC and main ?
sorry all this question , but i like to understand the concept :) of how things work

Plutomaniac here are my dumps , both 2mb and 4mb .

i read the flash descriptor info , but there is still that intrigue me about your previous post , you say the FIT will make both version and also the 6mb file , but my question mainly IS : suposedly when we flash region it will only inbeed the 1.5mb file to the region SPI rom , but in the case of 2 bios like in this motherboard , 2mb is were it suposed to be the MEregion and the 4mb regards other infos .. but the thing that is killing me is why you tell me to flash both files that FITC creaate , i mean if i do that for ex , i flash the 2mb file to the spi of 2mb and the 4 mb file to the 4mb spi rom i think majhor part of what is really in the original 4mb file will not be in the file that FIT create so therefor once i solder back the bios to the board it will certainly not boot correctly or not even boot (because FIT read my 2mb files but he give me info for the 4mb files as well , thats crazy :| perhaprds normal for you and perhaps im not seeing the true point here , so if you can elucidate me i apreciate a lot to learn with who knows about it :D
sorry perhaps you have more to do , but would be nice ehehhe

is there any tool for i can merge both files the 2mb plus 4 mb ? sorry asking you this but really trying to learn your way of doing this !
thk in advance