@Lost_N_BIOS
Yes, I understand that.
I just thought previously that there is a separate location/chip (for LAN card for example)on motherboard that contains firmware, serial and MAC-id.

Thanks @plutomaniac, I guess re-flash enabled wouldn't help at flashback session then. ERALL is where you rename the rom erall.rom and it erases entire chip and writes new, supposedly. I've seen it used in instances where user could not flash back to older ME, and where user needed to lash back to .rom BIOS after already being converted to .cap style BIOS. I am not certain this can be used with originally cap style boards or from cap BIOS to cap BIOS, it may only be for the boards that originally had a .rom BIOS. I thought maybe you knew more about it is why I asked

Wish Fernando would create a separate thread entitiled 'Intel ME news and announcements' keeping new firmware announcements separate from troubleshooting issues people are having. Much like how for Ubutool there are two threads. My two cents. Thank you.

Zitat von Ataemonus im Beitrag #4127

---

Because you do not understand what they are talking about, probably because you don't read the messages carefully.

---

Zitat von Lost_N_BIOS im Beitrag #4128

---

And since you do not have your own thread, nor quoted what you're referring to @kevindd992002 I am not sure what your asking that in regards to.
If you are talking about our posts just towards the bottom of the last page @ 275, no one is discussing transferring setting to ME

---

Guys, need your help. The IME drivers almost every time corrupt my laptop's sleeping procedure. It can shut down itself when being asleep or not going to sleep fully which forces me to shut down.
My laptop is Asus GL703GE and I run Win10x64.

Even Asus saw the issue and says to install IMEI v11.0.0.1166/11.0.0.1176/11.0.0.1189. However when I download them here: https://www.station-drivers.com/index.ph...id=1867&lang=en I have an error "this platform is not supported".

How can I get working drivers which Asus says to get?

Optionally the laptop's manufacturer says to completely disable IME in Control Panel.

Sorry @kevindd992002 I probably assumed he was using a clean ME (ie no settings, from the guide/repository)

Zitat von Lost_N_BIOS im Beitrag #4138

---

Sorry @kevindd992002 I probably assumed he was using a clean ME (ie no settings, from the guide/repository)

---

@plutomaniac

I know you said this in the OP: "FWUpdate tool does not require any prior Engine Configuration (DATA) and can thus work with merged RGN/EXTR + PMC images at CSME 12+ or both RGN & EXTR images at 8 <= (CS)ME <= 11 platforms" so I take it that the RGN firmware for my ASUS Z370 board (ASUS Maximus X Code) that can be downloaded from the OP will work when flashed with FWUpdate. But some people are reporting here that that is not the case. And that you need to copy the DATA portion from a dumped BIOS that has a Configured + Initialized ME of the same firmware version on it. Since the latest BIOS available for our boards (1602) has only ME 11.8.50.3470 included, how will I go about flashing the latest ME 11.8.55.3510 on it?

Zitat von plutomaniac im Beitrag #4144

---

@ kevindd992002:

What the OP says is correct. That one person even quotes this thread but fails to understand. Obviously that reply cannot be trusted. Follow the instructions at the first post.

---