Forum - RE: Intel Management Engine: Drivers, Firmware & System Tools

Win-Raid Forum (Drivers - Firmware - Modding) � Special Topics � Intel Management Engine � Intel (Converged Security) Management Engine: Drivers, Firmware and Tools

Page 236 of 380 � Page 1 ... 231 232 233 234 235 236 237 238 239 240 ... 380 Page �

Topic settings

Print view

Jump to forum

General & Forum related Topics News / Announcements Forum-related Questions & Suggestions Off Topic Important Drivers (AHCI/RAID, NVMe, USB etc.) General: Storage Drivers (AHCI/RAID, NVMe and USB) Specific: Intel AHCI/RAID Drivers Specific: NVIDIA nForce Chipset Drivers (incl. AHCI/RAID) Specific: NVMe Drivers Other Drivers System Performance RAID Performance AHCI/NVMe Performance Solid State Drives BIOS Modding BIOS Modding Guides and Problems BIOS modules (PCI ROM, EFI and others) BIOS Modding Requests Reports: BIOS Modding Results Offers: Already modded special BIOSes Special Topics Intel Management Engine CPU Microcodes NVMe Support for old Systems Other Tools (not BIOS modding related) Interesting PC Hardware & Software OS related Topics Windows 11 Windows 8-10/Server 2012-2019 Windows 7/Vista/Server 2008 Windows XP/2000/Server 2003 DOS/Windows 3.X/9X/ME - Retro Gaming Other Operating Systems

#3526 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Tue Nov 28, 2017 9:23 pm

Zitat von plutomaniac im Beitrag #3496
The "Notice for INTEL-SA-00086 vulnerabilities" has been revamped completely.

Reminders:

CSME v11.0 - v11.7, v11.10 & v11.20 firmware will be removed and replaced in the near future by v11.8, v11.11 & v11.21 respectively.

Flash Image Tool v11.7 is not compatible with CSME v11.8 PCH-LP firmware. An updated FIT v11.8 needs to be found.

Can I update Consumer PCH-LP v11.0.26.3000 to v11.8.50.3425 through the Intel (R) Firmware Update Utility v11.8.50.3425 ? (from the Intel CSME System Tools v11 r5)

reply

#3527 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Tue Nov 28, 2017 9:48 pm

Yes you can. Mind the three Warnings (1st/2nd CSME v11 and PCH-LP 100-series) in the first post please.

reply

#3528 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Wed Nov 29, 2017 12:13 am

Zitat von plutomaniac im Beitrag #3532
Yes you can. Mind the three Warnings (1st/2nd CSME v11 and PCH-LP 100-series) in the first post please.

It worked but a simple reboot was not enough. I had to turn it off, remove battery and reset bios to be sure. Pictures are before and after.
There's not much difference, except for the "EK Revoke State". It's "Revoked" now but I don't know what does it mean exacly.

ilario has attached files to this post

MEInfo report.txt

ilario has attached images to this post

intel_sa_00086.png

intel_sa_00086_2.png

reply

#3529 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Wed Nov 29, 2017 3:07 pm

Intel CSME 11.21 Corporate PCH-H Firmware v11.21.50.1424

@ ilario:

You're good to go. A general reset via Flash Programming Tool "fptw -greset" command should have been enough. You have a PCH-LP system so that's why the Re-Key extra fix was needed (something DRM related).

reply

#3530 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Thu Nov 30, 2017 8:38 am

Hi. I have some questions for everyone. Long story short, ME is an important part of my HTPC. In order to play Ultra HD Blu-Rays (i.e., 4K discs) on PCs, Hollywood has forced Cyberlink (the maker of PowerDVD, the only software that can play UHD discs) to use SGX. So, this means installing ME drivers and all that. The system was working fine until I installed the ME 11.8.50.3425 firmware. Now, discs won't play. Cyberlink's advisor software claims that the system doesn't support HDCP 2.2 (encrypted handshake protocol). This isn't true. Unfortunately, I've spent the past few days basically being ignored by Intel and Cyberlink (and ASRock, the motherboard manufacturer).

Any ideas on how this can be resolved, or how I can gather more info, or anything, really? Now that *ahem* there are alternative methods for accessing the data on some of my discs, it's not as big an issue. Still, this is a showstopping bug, and it's not exactly cheap to put together a UHD-conformant system. I've pasted relevant (IMO) system info below, along with info from MEInfo. Since the Protected Audio Video Path (PAVP) is present and enabled, it's hard to say if this is an Intel bug or Cyberlink bug. (Alas, I haven't found anybody yet who has a similar setup as mine and is willing to help me troubleshoot this issue.) I tried downgrading the firmware but I got an 8805 error (i.e., the SVN prevents downgrades).

Thanks!

-----------
ASRock Fatal1ty Z370 Gaming-ITX/ac motherboard (1.11 beta BIOS)

Coffee Lake i7-8700 CPU
LG WH16NS60 Ultra HD Blu-Ray drive
Windows 10 (1709 - fully up-to-date)
PowerDVD 17 Ultra (fully up-to-date)
Intel UHD 630 driver version 15.60.0.4849 (fully up-to-date)
Intel ME consumer driver version 11.8.50.3425 (fully up-to-date - upgraded from 11.7.4.3314)
No discrete graphics cards

--------
Intel(R) MEInfo Version: 11.6.25.1229
Copyright(C) 2005 - 2017, Intel Corporation. All rights reserved.

Intel(R) ME code versions:

BIOS Version L1.11
MEBx Version 0.0.0.0000
GbE Version 0.2
Vendor ID 8086
PCH Version 0
FW Version 11.8.50.3425 H
LMS Version 11.7.0.1037
MEI Driver Version 11.7.0.1032
Wireless Hardware Version 2.1.77
Wireless Driver Version 20.10.2.2

FW Capabilities 0x31101140

Intel(R) Capability Licensing Service - PRESENT/ENABLED
Protect Audio Video Path - PRESENT/ENABLED
Intel(R) Dynamic Application Loader - PRESENT/ENABLED
Intel(R) Platform Trust Technology - PRESENT/DISABLED

TLS Disabled
Last ME reset reason Firmware reset
Local FWUpdate Enabled
BIOS Config Lock Enabled
GbE Config Lock Enabled
Host Read Access to ME Enabled
Host Write Access to ME Disabled
Host Read Access to EC Disabled
Host Write Access to EC Disabled
SPI Flash ID 1 C22018
SPI Flash ID 2 Unknown
BIOS boot State Post Boot
OEM ID 00000000-0000-0000-0000-000000000000
Capability Licensing Service Enabled
OEM Tag 0x00000000
Slot 1 Board Manufacturer 0x00000000
Slot 2 System Assembler 0x00000000
Slot 3 Reserved 0x00000000
M3 Autotest Disabled
C-link Status Disabled
Independent Firmware Recovery Disabled
EPID Group ID 0xFFB
LSPCON Ports None
5K Ports None
OEM Public Key Hash FPF 0000000000000000000000000000000000000000000000000000000000000000
OEM Public Key Hash ME 0000000000000000000000000000000000000000000000000000000000000000
ACM SVN FPF 0x0
KM SVN FPF 0x0
BSMM SVN FPF 0x0
GuC Encryption Key FPF 0000000000000000000000000000000000000000000000000000000000000000
GuC Encryption Key ME 0000000000000000000000000000000000000000000000000000000000000000

FPF ME
--- --
Force Boot Guard ACM Disabled Disabled
Protect BIOS Environment Disabled Disabled
CPU Debugging Enabled Enabled
BSP Initialization Enabled Enabled
Measured Boot Disabled Disabled
Verified Boot Disabled Disabled
Key Manifest ID 0x0 0x0
Enforcement Policy 0x0 0x0
PTT Enabled Enabled
PTT Lockout Override Counter 0x0
EK Revoke State Not Revoked
PTT RTC Clear Detection FPF 0x0

reply

#3531 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Thu Nov 30, 2017 1:54 pm

Neglected to mention what kind of panel your using? Sure you have a 4k hdcp 2.2 capable monitor? Not all 4k monitors support hdcp 2.2.

reply

#3532 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Thu Nov 30, 2017 4:03 pm

Intel MEI Driver v11.7.0.1052 MEI-Only Installer

Intel CSME 11.8 Consumer PCH-LP Firmware v11.8.50.3425 (YPDM & NPDM)

Intel CSME System Tools v11 r6

@ crown_nick:

Please download the latest CSME System Tools v11 from this thread and post a "MEInfo -verbose" report in spoiler tags.

reply

#3533 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Thu Nov 30, 2017 7:17 pm

Zitat von plutomaniac im Beitrag #3301
@ MorLipf:

This is set at a ME NVAR (FWUpdLcl is called I think, 0 for Disabled and 1 for Enabled) and can be changed via Flash Programming Tool but probably when the system is in manufacturing mode (Flash Descriptor unlocked and ME Manufacturing Done Bit not set). Check out the options at FPT for NVAR, CVAR etc to see if you can achieve anything.

Thanks for your answer regarding my local FwUpdate problem. I did not notice that you already answered me weeks ago. So today I tried it again. FPT can read the FwUpdLcl variable but it cannot write it because "EOM - End of Manufacturing?" bit is set.
My next try was to flash in pure DOS mode with CSM enabled in the UEFI - without success.

Next year Dell wants to release the current CSME version officially for my Alienware 17 R3 notebook without updating the complete bios.
I suppose that this will be getting very interesting because of my problem when they release it together with the regular FwUpdate tool.

Is there any other chance to enable local FwUpdate?

reply

#3534 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Thu Nov 30, 2017 7:35 pm (Last edited: Thu Nov 30, 2017 7:43 pm)

In the german MSI FTP repository there is a patch:
http://msi-ftp.de:8080/login.html (enter as Anonym and select the BIOS folder)
it worked for me (apart from "updating" to an older driver version)

WORD OF WARNING!!! try it at your risk, it may cause you issues or BSOD.

reply

#3535 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Thu Nov 30, 2017 8:15 pm

Hi guys,

Got a Dell Inspiron H81 chipset running a i5-4460. Trying to run Meinfo64 from the 9.1 system tools package to get the ME details but MEInfo fails miserably errors all in red that it cant access the ME. HWInfo64 however details all the ME info: 9.1 build 1120.

So are Dells extra special? The usual tools not compatible?

Thanks

reply

#3536 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Thu Nov 30, 2017 9:29 pm

Zitat von davidm71 im Beitrag #3536
Neglected to mention what kind of panel your using? Sure you have a 4k hdcp 2.2 capable monitor? Not all 4k monitors support hdcp 2.2.

Yep. Vizio M55-E0. As mentioned before, everything was fine before the ME firmware was updated. (Well, Cyberlink's software didn't work half the time, but their software is notoriously buggy. Yay.)

Zitat von plutomaniac im Beitrag #3537
@ crown_nick:

Please download the latest CSME System Tools v11 from this thread and post a "MEInfo -verbose" report in spoiler tags.

Thank you. It's pasted below, after upgrading various bits of software as mentioned a bit later. The only thing that jumps out at me at first glance is the lack of LSPCON ports. I have no idea if that's accurate but I do know that LSPCON is part of the HDMI/HDCP chain. I believe what's happening is that the motherboard actually uses DisplayPort 1.2 natively and then uses a MegaChips MDCP2800 chip to convert the signal to HDMI 2.0 with HDCP 2.2. Not ideal but it does work, or at least, it worked before the firmware upgrade. Maybe the upgrade somehow altered the chip and/or its connection? I took a huge gamble and tried upgrading the chip's firmware (1.66 -> 1.72) via an upgrade tool Intel supplies for a couple of their NUCs. The upgrade seemed to finish successfully but, even after upgrading the ME drivers to the latest version and reinstalling my display drivers, HDCP 2.2 is still not listed as functional by Cyberlink. (Does anybody know of a program I can run that'll test for HDCP 2.2? Frankly, I wouldn't be surprised if the FW upgrade exposed a bug in Cyberlink's code.)

Intel(R) MEInfo Version: 11.8.50.3425
Copyright(C) 2005 - 2017, Intel Corporation. All rights reserved.

Windows OS Version : 10.0

FW Status Register1: 0x90000245
FW Status Register2: 0x06F60506
FW Status Register3: 0x00000020
FW Status Register4: 0x00084000
FW Status Register5: 0x00000000
FW Status Register6: 0x40000000

CurrentState: Normal
ManufacturingMode: Disabled
FlashPartition: Valid
OperationalState: CM0 with UMA
InitComplete: Complete
BUPLoadState: Success
ErrorCode: No Error
ModeOfOperation: Normal
SPI Flash Log: Not Present
Phase: ROM/Preboot
ICC: Valid OEM data, ICC programmed
ME File System Corrupted: No
PhaseStatus: AFTER_SRAM_INIT
FPF and ME Config Status: Match
FW Capabilities value is 0x31101140
Feature enablement is 0x11101140
Platform type is 0x72440322
Found an Intel non-vPro Wireless device
Intel(R) ME code versions:

Table Type 37 ( 0x 25 ) found, size of 0 (0x 00 ) bytes
BIOS Version L1.11
Table Type 37 ( 0x 25 ) found, size of 0 (0x 00 ) bytes
Table Type 0 ( 0x 00 ) found, size of 67 (0x 43 ) bytes
Table Type 1 ( 0x 01 ) found, size of 166 (0x A6 ) bytes
Table Type 2 ( 0x 02 ) found, size of 127 (0x 7F ) bytes
Table Type 3 ( 0x 03 ) found, size of 138 (0x 8A ) bytes
Table Type 9 ( 0x 09 ) found, size of 24 (0x 18 ) bytes
Table Type 11 ( 0x 0B ) found, size of 29 (0x 1D ) bytes
Table Type 32 ( 0x 20 ) found, size of 22 (0x 16 ) bytes
Table Type 40 ( 0x 28 ) found, size of 22 (0x 16 ) bytes
Table Type 16 ( 0x 10 ) found, size of 25 (0x 19 ) bytes
Table Type 17 ( 0x 11 ) found, size of 109 (0x 6D ) bytes
Table Type 19 ( 0x 13 ) found, size of 33 (0x 21 ) bytes
Table Type 7 ( 0x 07 ) found, size of 29 (0x 1D ) bytes
Table Type 4 ( 0x 04 ) found, size of 189 (0x BD ) bytes
Table Type 20 ( 0x 14 ) found, size of 37 (0x 25 ) bytes
Table Type 130 ( 0x 82 ) found, size of 22 (0x 16 ) bytes
MEBx Version 0.0.0.0000
GbE Version 0.2
Vendor ID 8086
PCH Version 0
FW Version 11.8.50.3425 H
Security Version (SVN) 3
LMS Version 11.7.0.1037
MEI Driver Version 11.7.0.1045
Wireless Hardware Version 2.1.77
Wireless Driver Version 20.10.2.2

FW Capabilities 0x31101140

Intel(R) Capability Licensing Service - PRESENT/ENABLED
Protect Audio Video Path - PRESENT/ENABLED
Intel(R) Dynamic Application Loader - PRESENT/ENABLED
Service Advertisement & Discovery - NOT PRESENT
Intel(R) NFC Capabilities - NOT PRESENT
Intel(R) Platform Trust Technology - PRESENT/DISABLED

Re-key needed True
Platform is re-key capable True
TLS Disabled
Last ME reset reason Firmware reset
Local FWUpdate Enabled
BIOS Config Lock Enabled
GbE Config Lock Enabled
Get flash master region access status...done
Host Read Access to ME Enabled
Host Write Access to ME Disabled
Get EC region access status...done
Host Read Access to EC Disabled
Host Write Access to EC Disabled
Protected Range Register Base #0 0x0
Protected Range Register Limit #0 0x0
Protected Range Register Base #1 0x0
Protected Range Register Limit #1 0x0
Protected Range Register Base #2 0x0
Protected Range Register Limit #2 0x0
Protected Range Register Base #3 0x0
Protected Range Register Limit #3 0x0
Protected Range Register Base #4 0x0
Protected Range Register Limit #4 0x0
SPI Flash ID 1 C22018
SPI Flash ID 2 Unknown
BIOS boot State Post Boot
OEM ID 00000000-0000-0000-0000-000000000000
Capability Licensing Service Enabled
OEM Tag 0x00000000
Slot 1 Board Manufacturer 0x00000000
Slot 2 System Assembler 0x00000000
Slot 3 Reserved 0x00000000
M3 Autotest Disabled
C-link Status Disabled
Independent Firmware Recovery Disabled
EPID Group ID 0xFFB

Retrieving Variable "LSPCON Port Configuration"
LSPCON Ports None

Retrieving Variable "eDP Port Configuration"
5K Ports None
OEM Public Key Hash FPF 0000000000000000000000000000000000000000000000000000000000000000

Retrieving Variable "OEM Public Key Hash"
OEM Public Key Hash ME 0000000000000000000000000000000000000000000000000000000000000000
ACM SVN FPF 0x0
KM SVN FPF 0x0
BSMM SVN FPF 0x0
GuC Encryption Key FPF 0000000000000000000000000000000000000000000000000000000000000000

Retrieving Variable "GuC Encryption Key"
GuC Encryption Key ME 0000000000000000000000000000000000000000000000000000000000000000

FPF ME
--- --
Force Boot Guard ACM Disabled
Retrieving Variable "Force Boot Guard ACM Enabled"
Disabled
Protect BIOS Environment Disabled
Retrieving Variable "Protect BIOS Environment Enabled"
Disabled
CPU Debugging Enabled
Retrieving Variable "CPU Debugging"
Enabled
BSP Initialization Enabled
Retrieving Variable "BSP Initialization"
Enabled
Measured Boot Disabled
Retrieving Variable "Measured Boot Enabled"
Disabled
Verified Boot Disabled
Retrieving Variable "Verified Boot Enabled"
Disabled
Key Manifest ID 0x0
Retrieving Variable "Key Manifest ID"
0x0
Enforcement Policy 0x0
Retrieving Variable "Error Enforcement Policy"
0x0
PTT Enabled
Retrieving Variable "Intel(R) PTT Supported"
Enabled
PTT Lockout Override Counter 0x0
EK Revoke State Not Revoked
PTT RTC Clear Detection FPF 0x0

reply

#3537 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Thu Nov 30, 2017 10:36 pm (Last edited: Thu Nov 30, 2017 10:38 pm)

@ MorLipf:

To leave the "Manufacturing Done bit" unset, you need to use Flash Image Tool. Also, you need to leave all Flash Descriptor permissions to 0xFFF. Then reflash the output SPI image back. Of course you need to have read/write access to do that (programmer or maybe a BIOS option to Enable ME Re-Flash etc). Then, theoretically you can play with the VNARs. Sometimes the FWUpdate capability is blocked by the OEM via the BIOS from what I've seen.

@ davidm71:

Close any background programs when using Intel tools which require the MEI driver. For example, HWInfo must not be running at the same time. Otherwise, use the DOS and/or EFI versions of the Intel tools which avoid OS interferences.

@ crown_nick:

I believe the issue is related to this "Re-key needed True" result. It should be "False" if the OEM has done their job properly from what I've seen. The fix is relatively new so I'm not sure what "Re-Key" is exactly, probably some key revocation that needs to be done due to Intel-SA-00086 fix. Download this (hopefully) fixed SPI image and flash it via the in-BIOS flasher (InstantFlash). Once it is done, reboot and run Flash Programming Tool with command "fptw -greset" and check if the problem persists after the reboot. Show us a new "MEInfo -verbose" as well after these are done.

reply

#3538 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Thu Nov 30, 2017 10:40 pm

Thanks for your immediate answer. That sounds hard to accomplish. I will wait for Dell's official update in january and then see what will happen.

reply

#3539 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Thu Nov 30, 2017 11:31 pm

Zitat von plutomaniac im Beitrag #3542
@ crown_nick:

I believe the issue is related to this "Re-key needed True" result. It should be "False" if the OEM has done their job properly from what I've seen. The fix is relatively new so I'm not sure what "Re-Key" is exactly, probably some key revocation that needs to be done due to Intel-SA-00086 fix. Download this (hopefully) fixed SPI image and flash it via the in-BIOS flasher (InstantFlash). Once it is done, reboot and run Flash Programming Tool with command "fptw -greset" and check if the problem persists after the reboot. Show us a new "MEInfo -verbose" as well after these are done.

Thanks for helping. I really appreciate it. :) Alas, this didn't fix the problem. The key thing is a good catch. I've pasted the MEInfo log below. Looks like a re-key is still being requested.

Intel(R) MEInfo Version: 11.8.50.3425
Copyright(C) 2005 - 2017, Intel Corporation. All rights reserved.

Windows OS Version : 10.0

FW Status Register1: 0x90000245
FW Status Register2: 0x02F60506
FW Status Register3: 0x00000020
FW Status Register4: 0x00084000
FW Status Register5: 0x00000000
FW Status Register6: 0x40000000

CurrentState: Normal
ManufacturingMode: Disabled
FlashPartition: Valid
OperationalState: CM0 with UMA
InitComplete: Complete
BUPLoadState: Success
ErrorCode: No Error
ModeOfOperation: Normal
SPI Flash Log: Not Present
Phase: ROM/Preboot
ICC: Valid OEM data, ICC programmed
ME File System Corrupted: No
PhaseStatus: AFTER_SRAM_INIT
FPF and ME Config Status: Match
FW Capabilities value is 0x31101140
Feature enablement is 0x11101140
Platform type is 0x72440322
Found an Intel non-vPro Wireless device
Intel(R) ME code versions:

Table Type 37 ( 0x 25 ) found, size of 0 (0x 00 ) bytes
BIOS Version L1.11
Table Type 37 ( 0x 25 ) found, size of 0 (0x 00 ) bytes
Table Type 0 ( 0x 00 ) found, size of 67 (0x 43 ) bytes
Table Type 1 ( 0x 01 ) found, size of 166 (0x A6 ) bytes
Table Type 2 ( 0x 02 ) found, size of 127 (0x 7F ) bytes
Table Type 3 ( 0x 03 ) found, size of 138 (0x 8A ) bytes
Table Type 9 ( 0x 09 ) found, size of 24 (0x 18 ) bytes
Table Type 11 ( 0x 0B ) found, size of 29 (0x 1D ) bytes
Table Type 32 ( 0x 20 ) found, size of 22 (0x 16 ) bytes
Table Type 40 ( 0x 28 ) found, size of 22 (0x 16 ) bytes
Table Type 16 ( 0x 10 ) found, size of 25 (0x 19 ) bytes
Table Type 17 ( 0x 11 ) found, size of 109 (0x 6D ) bytes
Table Type 19 ( 0x 13 ) found, size of 33 (0x 21 ) bytes
Table Type 7 ( 0x 07 ) found, size of 29 (0x 1D ) bytes
Table Type 4 ( 0x 04 ) found, size of 189 (0x BD ) bytes
Table Type 20 ( 0x 14 ) found, size of 37 (0x 25 ) bytes
Table Type 130 ( 0x 82 ) found, size of 22 (0x 16 ) bytes
MEBx Version 0.0.0.0000
GbE Version 0.2
Vendor ID 8086
PCH Version 0
FW Version 11.8.50.3425 H
Security Version (SVN) 3
LMS Version 11.7.0.1037
MEI Driver Version 11.7.0.1045
Wireless Hardware Version 2.1.77
Wireless Driver Version 20.10.2.2

FW Capabilities 0x31101140

Intel(R) Capability Licensing Service - PRESENT/ENABLED
Protect Audio Video Path - PRESENT/ENABLED
Intel(R) Dynamic Application Loader - PRESENT/ENABLED
Service Advertisement & Discovery - NOT PRESENT
Intel(R) NFC Capabilities - NOT PRESENT
Intel(R) Platform Trust Technology - PRESENT/DISABLED

Re-key needed True
Platform is re-key capable True
TLS Disabled
Last ME reset reason Global system reset
Local FWUpdate Enabled
BIOS Config Lock Enabled
GbE Config Lock Enabled
Get flash master region access status...done
Host Read Access to ME Enabled
Host Write Access to ME Disabled
Get EC region access status...done
Host Read Access to EC Disabled
Host Write Access to EC Disabled
Protected Range Register Base #0 0x0
Protected Range Register Limit #0 0x0
Protected Range Register Base #1 0x0
Protected Range Register Limit #1 0x0
Protected Range Register Base #2 0x0
Protected Range Register Limit #2 0x0
Protected Range Register Base #3 0x0
Protected Range Register Limit #3 0x0
Protected Range Register Base #4 0x0
Protected Range Register Limit #4 0x0
SPI Flash ID 1 C22018
SPI Flash ID 2 Unknown
BIOS boot State Post Boot
OEM ID 00000000-0000-0000-0000-000000000000
Capability Licensing Service Enabled
OEM Tag 0x00000000
Slot 1 Board Manufacturer 0x00000000
Slot 2 System Assembler 0x00000000
Slot 3 Reserved 0x00000000
M3 Autotest Disabled
C-link Status Disabled
Independent Firmware Recovery Disabled
EPID Group ID 0xFFB

Retrieving Variable "LSPCON Port Configuration"
LSPCON Ports None

Retrieving Variable "eDP Port Configuration"
5K Ports None
OEM Public Key Hash FPF 0000000000000000000000000000000000000000000000000000000000000000

Retrieving Variable "OEM Public Key Hash"
OEM Public Key Hash ME 0000000000000000000000000000000000000000000000000000000000000000
ACM SVN FPF 0x0
KM SVN FPF 0x0
BSMM SVN FPF 0x0
GuC Encryption Key FPF 0000000000000000000000000000000000000000000000000000000000000000

Retrieving Variable "GuC Encryption Key"
GuC Encryption Key ME 0000000000000000000000000000000000000000000000000000000000000000

FPF ME
--- --
Force Boot Guard ACM Disabled
Retrieving Variable "Force Boot Guard ACM Enabled"
Disabled
Protect BIOS Environment Disabled
Retrieving Variable "Protect BIOS Environment Enabled"
Disabled
CPU Debugging Enabled
Retrieving Variable "CPU Debugging"
Enabled
BSP Initialization Enabled
Retrieving Variable "BSP Initialization"
Enabled
Measured Boot Disabled
Retrieving Variable "Measured Boot Enabled"
Disabled
Verified Boot Disabled
Retrieving Variable "Verified Boot Enabled"
Disabled
Key Manifest ID 0x0
Retrieving Variable "Key Manifest ID"
0x0
Enforcement Policy 0x0
Retrieving Variable "Error Enforcement Policy"
0x0
PTT Enabled
Retrieving Variable "Intel(R) PTT Supported"
Enabled
PTT Lockout Override Counter 0x0
EK Revoke State Not Revoked
PTT RTC Clear Detection FPF 0x0

reply

#3540 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Thu Nov 30, 2017 11:34 pm

Thanks Plutomaniac. Must have been either hwinfo or driver issue. Just wish I knew how to extract the Dell bios from the executable. Thanks.

reply

Repair MEI on Samsung NP550P7C-S04PL � � Strange ME Region size mismatch after reconfiguring and rebuilding

Page 236 of 380 � Page 1 ... 231 232 233 234 235 236 237 238 239 240 ... 380 Page �

Please enter a reason for warning.