Someone can help me for my previous request ???
Intel Management Engine: Drivers, Firmware & System Tools (230)

Thanks.

@andr84, afaik — yes.

http://station-drivers.com/index.php?opt...id=3197&lang=fr is this for 1.5 Mo for sure or 5M like in this post ?

In station has the firmware Intel ME Version 9.1.42.3002 for 1.5Mo released by hp.
-http://www.station-drivers.com/index.php...id=3197&lang=fr

if I just want to reflash(not update) full bios and Me Region(data+code) using official manufacturer's bios and want to be sure that it was really reflashed, does flash programming tool suit well for that purpose and it is safe to use? According to ME analyzer FD is unlocked.

and command can be: fptw64 -f officialbios.bin ?
if yes, it can be done in Windows too or only in DOS?

Zitat von plutomaniac im Beitrag #3462

---

@ andr84:

If your OEM gives a full SPI image (FD + ME + BIOS etc) .

---

there is a new version of Intel ME Firmware Version 9.1.42.3002, there is a changelog?
it's compatible with intel x99 platform?

Zitat von pipes80 im Beitrag #3465

---

there is a new version of Intel ME Firmware Version 9.1.42.3002, there is a changelog?
it's compatible with intel x99 platform?

---

It's not compatible as it is a 5 meg SKU firmware (Corporate). It is not suitable for x99 consumer motherboards.

@ plutomaniac
thank you, I discovered one more tool(UEFITool) for myself.

Zitat

---

Gigabyte used to leave the FD unlocked back then after the manufacturing line. Their in-BIOS flasher was also capable of re-flashing the entire SPI image

---

if it is really true its bad then because I can't get rid of these unexpected restarts after shut down and wakes from sleep. Reflashed already few times with built in utility.
* I can mistake but the only difference after these reflashings is that if i disable BIOS 'Eup'(some low power mode in standby) in power settings I don't have restarts after shutdowns but for sleep still persists. Before reflashing disabling Eup didn't affect.

Can exclude Windows (when holding power button down for 4 seconds, PC can also shut down and start again itself back sometimes, even with disconnected HDD) and PSU(tried another one).

When board was new it showed just black screen and in local warranty I was said that ME was dead and thats why board didn't post at all.
I got back the same board and they said that as they don't see soldering marks so they assume that manufacturer service just flashed it.
But what exactly was flashed I don't know.
I thought they used hardware programmer(or more advanced flashing ways) and I hoped to find more advanced way to reflash all BIOS than Gigabyte official flashing utility. But if in my case hardware programmer = BIOS built-in flasher (as all is unlocked) it is pointless.

I can try Ctrl+F10(if it works) to switch between main and backup BIOS but I'm absolutely not sure if second chip is not corrupted, I dont even know which chip I'm using now(backup or main).
But maybe this issue is not refers ME at all, on one forum I read that it is maybe due to CMOS corrupted register(the part which is responsible for standby line).

ftp://ftp.hp.com/pub/softpaq/sp80001-80500/sp80087.html
it's compatible with intel z97 lga 1150

9.1.41.3024 it's 5M also......
link.....ftp://ftp.hp.com/pub/softpaq/sp80001-80500/sp80087.exe

Btw,
v9.1.42.3002 - Security fixes.
v9.1.41.3024 - Security fix.