Forum - RE: Intel Management Engine: Drivers, Firmware & System Tools

Win-Raid Forum (Drivers - Firmware - Modding) � Special Topics � Intel Management Engine � Intel (Converged Security) Management Engine: Drivers, Firmware and Tools

Page 223 of 380 � Page 1 ... 218 219 220 221 222 223 224 225 226 227 ... 380 Page �

Topic settings

Print view

Jump to forum

General & Forum related Topics News / Announcements Forum-related Questions & Suggestions Off Topic Important Drivers (AHCI/RAID, NVMe, USB etc.) General: Storage Drivers (AHCI/RAID, NVMe and USB) Specific: Intel AHCI/RAID Drivers Specific: NVIDIA nForce Chipset Drivers (incl. AHCI/RAID) Specific: NVMe Drivers Other Drivers System Performance RAID Performance AHCI/NVMe Performance Solid State Drives BIOS Modding BIOS Modding Guides and Problems BIOS modules (PCI ROM, EFI and others) BIOS Modding Requests Reports: BIOS Modding Results Offers: Already modded special BIOSes Special Topics Intel Management Engine CPU Microcodes NVMe Support for old Systems Other Tools (not BIOS modding related) Interesting PC Hardware & Software OS related Topics Windows 11 Windows 8-10/Server 2012-2019 Windows 7/Vista/Server 2008 Windows XP/2000/Server 2003 DOS/Windows 3.X/9X/ME - Retro Gaming Other Operating Systems

#3331 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Tue Oct 10, 2017 1:40 pm

Hi, thx for answer, i already try the clean guide, the same result:

Error 11: [FitActions] Not enough flash space.
Error 51: [FitActions] Failed to expand ME Region.
Error 3: [CsmeBinaryGen] Build general error. In build action.
Error 8: [CsmeBinaryGen] Error building attribute. data
Error 8: [CsmeBinaryGen] Error building attribute. MeRegionData
Error 8: [CsmeBinaryGen] Error building attribute. RegionData
Error 8: [CsmeBinaryGen] Error building attribute. FlashLayout
Error 3: [CsmeBinaryGen] Build general error.
Error 15: Failed to build.
Failed to build!

reply

#3332 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Tue Oct 10, 2017 11:23 pm

@ Zilog:

Yes, the pinmod works at your system with the Realtek chip. It's usually pins 1 and 5 for Realtek but try to find the datasheet online to verify the pinout. As for methodology, do not use FTK (there instructions are 3 years old) but manually download FPT, MEinfo, MEManuf etc from this thread.

@ dany_l2003:

It's the first time you mentioned any error. Can you compress and attach the image that you are trying to clean?

reply

#3333 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Fri Oct 13, 2017 1:58 pm

Intel ME 11.7 Corporate PCH-H Firmware v11.7.0.3307

reply

#3334 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Tue Oct 17, 2017 7:34 pm

Feyd1364

Show info

Posts:	19
Registered since:	02.26.2016

CFL ME FW 11.8.50.3399_CON_H_D0_PRD_EXTR

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
 

-------[ ME Analyzer v1.30.0 r100 ]-------
 
File:     11.8.50.3399_CON_H_D0_PRD_EXTR.rgn (1/1)
 
Family:   CSE ME
Version:  11.8.50.3399
Release:  Production
Type:     Region, Extracted
SKU:      Error, unknown CSME 11.8 Minor version! *
Rev:      D0
SVN:      3
VCN:      269
LBG:      No
PV:       Yes
Date:     2017-09-26
FIT Ver:  11.8.50.3399
FIT SKU:  PCH-H No Emulation Z370
Size:     0x1F0000
 
SKU from Kernel: Invalid
SKU from Extension 0C: H
SKU from Flash Image Tool: H
SKU from ME Analyzer Database: NaN
 
* Please report this issue!
 
Warning: File size exceeds firmware, unneeded padding!
 
Note: This firmware was not found at the database, please report it!
 
Press enter to exit
 
 

Feyd1364 has attached files to this post

11.8.50.3399_CON_H_D0_PRD_EXTR.zip

reply

#3335 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Wed Oct 18, 2017 11:02 am (Last edited: Wed Oct 18, 2017 11:02 am)

Intel ME System Tools v11.7 r2
~~Flash Programming Tool(EFI64): 11.7.0.3307~~ old version in the archive 11.6.0.3307 correct this please if possible.

reply

#3336 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Wed Oct 18, 2017 4:02 pm

Zitat von jjxaker im Beitrag #3341
Intel ME System Tools v11.7 r2
~~Flash Programming Tool(EFI64): 11.7.0.3307~~ old version in the archive 11.6.0.3307 correct this please if possible.

It is not old. There is no 11.6.0.3307 version. Intel made a typo and wrote a minor of 6 instead of 7. The version is 11.7.0.3307, as written at my text file.

reply

#3337 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Wed Oct 18, 2017 5:15 pm (Last edited: Wed Oct 18, 2017 5:15 pm)

Zitat von plutomaniac im Beitrag #3342
Intel made a typo and wrote a minor of 6 instead of 7.

I'm understood, thank you.

reply

#3338 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Thu Oct 19, 2017 1:41 am

Hi!
I have an Asus G551VW laptop with HM170 chipset and the newest available BIOS (209). I installed Intel MEI v11.7.0.1043 for consumer, then I wanted to manually update the firmware. Seemingly I could do it, but after a PC restart I couldn�t see my firmware, because i got the following error:
� Error 86: Communication error between application and Intel(R) ME module (FWU client)
� Error 81: Internal error (Could not determine FW features information)

After restart I ran the command: FwupdLcl64.exe -f 11.7.4.3314_CON_H_D0_PRD_RGN.bin (in Admin Command Prompt) and I got the next error message:
Error 8193: Fail to load MEI device driver (PCI access for Windows)
Above error is often caused by one of below reasons:
Administrator privilege needed for running the tool
ME is in an error state causing MEI driver fail
MEI driver is not installed

I used these files:
Intel ME system tools 11.7 r2 FWupdLcl64.exe
11.7.4.3314_CON_H_D0_PRD_RGN.bin
I did the procedure after this Video

reply

#3339 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Thu Oct 19, 2017 10:06 am (Last edited: Thu Oct 19, 2017 10:57 am)

Zitat von eroli23 im Beitrag #3344

Error 86: Communication error between application and Intel(R) ME module (FWU client)
Error 81: Internal error (Could not determine FW features information)

ME FW region is damaged. most likely the file you were stitching was damaged....
If your ME Region is unlocked in your BIOS? (Intel Flash Programming Tool: FPTW64 -i) then you can restore it (through Intel Flash Programming Tool FPTW64 -f bios.bin -me). if not? then you need a SPI programmer.
If you do not have a SPI programmer? then you can make a short circuit on the audio chip (see datasheet!) of the first and fifth contact (before passing the POST, then release), in this case all bios regions are unlocked.
Good luck.

reply

#3340 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Thu Oct 19, 2017 11:09 am (Last edited: Thu Oct 19, 2017 11:10 am)

Intel ME 11.10 Consumer PCH-H Firmware v11.11.50.1402
http://rgho.st/7wYjzXzhx

PS. This is ME Region file! do not flash with Intel Firmware Update Utility!!! special preparation of the file is required.

reply

#3341 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Thu Oct 19, 2017 12:50 pm (Last edited: Thu Oct 19, 2017 5:40 pm)

Zitat von jjxaker im Beitrag #3345

ME FW region is damaged. most likely the file you were stitching was damaged....
If your ME Region is unlocked in your BIOS? (Intel Flash Programming Tool: FPTW64 -i) then you can restore it (through Intel Flash Programming Tool FPTW64 -f bios.bin -me). if not? then you need a SPI programmer.
If you do not have a SPI programmer? then you can make a short circuit on the audio chip (see datasheet!) of the first and fifth contact (before passing the POST, then release), in this case all bios regions are unlocked.
Good luck.

Very likely you can also unlock the ME Region for reading and writing by booting a modified grub and change these two settings
ME State, Variable: 0x3D4 => default value 0x01 (enabled) => setup_var 0x3D4 0x00
Me FW Image Re-Flash, Variable: 0x3C5 => default value 0x00 (disabled) => setup_var 0x3C5 0x01

If the modified grub doesn't work you can use fpt to flash a patched NVAR Store (size 0x20000). This is what I usually do, because it is much quicker. Of course you must know what you are doing ...

reply

#3342 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Thu Oct 19, 2017 4:36 pm (Last edited: Thu Oct 19, 2017 4:36 pm)

Intel CSME 11.11 Consumer PCH-H Firmware v11.11.50.1402

Intel CSME 11.8 Consumer PCH-H Firmware v11.8.50.3399

@ eroli23:

A driver update cannot cause this issue so it must have been like that from before you tried anything. Use the DOS or EFI tools. First run Flash Programming Tool with command "fpt -greset" and after the reboot boot into DOS/EFI again and try MEInfo and MEManuf.

reply

#3343 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Thu Oct 19, 2017 9:30 pm

Successfully updated to Intel CSME 11.8 Consumer PCH-H Firmware v11.8.50.3399

System : i7-7700K , MB: Asus Strix Z720H

MEInfo:

Intel(R) MEInfo Version: 11.8.50.3399
Copyright(C) 2005 - 2017, Intel Corporation. All rights reserved.

Intel(R) ME code versions:

BIOS Version 1009
MEBx Version 0.0.0.0000
GbE Version 0.2
Vendor ID 8086
PCH Version 0
FW Version 11.8.50.3399 H
Security Version (SVN) 3
LMS Version 11.7.0.1043
MEI Driver Version 11.7.0.1040
Wireless Hardware Version Not Available
Wireless Driver Version Not Available

FW Capabilities 0x31111540

Intel(R) Capability Licensing Service - PRESENT/ENABLED
Protect Audio Video Path - PRESENT/ENABLED
Intel(R) Dynamic Application Loader - PRESENT/ENABLED
Intel(R) Platform Trust Technology - PRESENT/DISABLED

Re-key needed False
TLS Disabled
Last ME reset reason Firmware reset
Local FWUpdate Enabled
BIOS Config Lock Enabled
GbE Config Lock Enabled
Host Read Access to ME Enabled
Host Write Access to ME Disabled
Host Read Access to EC Disabled
Host Write Access to EC Disabled
SPI Flash ID 1 20BA18
SPI Flash ID 2 Unknown
BIOS boot State Post Boot
OEM ID 00000000-0000-0000-0000-000000000000
Capability Licensing Service Enabled
OEM Tag 0x00000000
Slot 1 Board Manufacturer 0x00000000
Slot 2 System Assembler 0x00000000
Slot 3 Reserved 0x00000000
M3 Autotest Disabled
C-link Status Disabled
Independent Firmware Recovery Disabled
EPID Group ID 0x1FD9
LSPCON Ports None
5K Ports None
OEM Public Key Hash FPF 0000000000000000000000000000000000000000000000000000000000000000
OEM Public Key Hash ME 0000000000000000000000000000000000000000000000000000000000000000
ACM SVN FPF 0x0
KM SVN FPF 0x0
BSMM SVN FPF 0x0
GuC Encryption Key FPF 0000000000000000000000000000000000000000000000000000000000000000
GuC Encryption Key ME 0000000000000000000000000000000000000000000000000000000000000000

FPF ME
--- --
Force Boot Guard ACM Disabled Disabled
Protect BIOS Environment Disabled Disabled
CPU Debugging Enabled Enabled
BSP Initialization Enabled Enabled
Measured Boot Disabled Disabled
Verified Boot Disabled Disabled
Key Manifest ID 0x0 0x0
Enforcement Policy 0x0 0x0
PTT Enabled Enabled
PTT Lockout Override Counter 0x0
EK Revoke State Not Revoked

reply

#3344 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Thu Oct 19, 2017 9:35 pm

Thank you for the report kostar20071.

I see that Intel now added a Security Version Number (SVN) field at MEInfo 11.8. Neat.

reply

#3345 | RE: Intel Management Engine: Drivers, Firmware & System Tools datum

Thu Oct 19, 2017 10:33 pm

Ok, thanks for the help until now.
@ jjxaker: I don�t have SPI programmer, because my BIOS is not unlocked.
@ plutomaniac: I ran the �FPT -greset� as you described, then the PC restarted automatically. I booted from a pendrive and I used DOS files. I could earn these informations.

MEinfo Video

I apologise, I do this for the first time but I would really like to do it.

reply

Repair MEI on Samsung NP550P7C-S04PL � � Strange ME Region size mismatch after reconfiguring and rebuilding

Page 223 of 380 � Page 1 ... 218 219 220 221 222 223 224 225 226 227 ... 380 Page �

Please enter a reason for warning.