Reading up on some of these new ME firmware's I wanted to double check in here. My board is a 6-series board, however, not mentioned is that this board BIOS came with ME version 8.0. If I read correctly in the pages I can update this firmware to the 8.1 versions correct? Which would be the 8.1.70.1590.

Board is P8P67 Pro B3. Manufacturer BIOS 3207 came with ME FW 8.0.2.1410

Zitat von plutomaniac im Beitrag #3307

---

Zitat von bananenmann im Beitrag #3306

---

Sorry, my english isn't quite good - but doesn't this sentence mean, that I have to use a stock firmware and not a extracted one for cleaning the Data?

---

Yes, it does. Now read Step 4 of the actual guide carefully. You don't have to use the latest or exactly same RGN version as your current firmware. The closest version possible, which is RGN of course, will do just fine under most circumstances. There is even an example provided to highlight that.

---

Zitat von plutomaniac im Beitrag #3310

---

@ bananenmann:

If you want to clean the DATA then follow the guide with 8.1.65 RGN and then update manually to 8.1.70 via FWUpdate.

---

Zitat von plutomaniac im Beitrag #3312

---

I do use a Z77 board with i5-3570K overlocked to 4.4GHz which got updated via FWUpdate to 8.1.70 and didn't notice any issues.

Also, please do not tag me at my own threads, I monitor them regardless.

---

@plutomaniac - thanks. Now I ran in to a problem. On a 9-series board I tried running the meinfowin64 (Windows 8.1 64-bit Pro) just to see what version I had on that 9-series board. Followed instructions and placed folder within the C root. (using the appropriate info tool for 9-series)

When I ran the meinfowin64 I got the red error
Error 9470: Fail to load driver <PCI access for Windows>
Tool needs to run with administrator privilege account.

I even tried my last MEInfoWin64 from an older version I used before which back then did work as I have screen shots; it too does not work, same error.

Only change from when it was working to today's system is I had to do a clean install. Currently I am using the 11.7.0.1032 driver and I believe the firmware is 9.1.37.1002. I wanted to run the info to be sure so I can update my records, but I also wanted to run the MEManuf to check it out. First thing first though. My profile is an administrator. Not sure what is going on. Any advice on making this work?

@ plutomaniac
Ok, thx for answer.
For an example, if then I just want to reflash the current ME version for testing purposes via FWUpdLcl tool, where could I find older firmware versions? I think I need 9.0.30.1482 1.5MB. I found one on station drivers but there are some Asus staff in name and its 1.5&5MB together.

Hi, i need help whith to find ME Firmware for a Apple board whith i5 7267U .
i already try whith 11.6.14.1241_SLM_LP_C0_NPDM_PRD_EXTR but i have problem whith bot(pc restart on some condition)

Thx

Can someone help me in #3314?