Just as above Lenovo Thinkcentre M800 Desktop PC i5-6400, so using Intel ME Firmware v11.0.28.3002 (COR H)

Thanks, would the CPU change for one with vPro ie i5-6500 allow it?

Hi @plutomaniac
I got some problem with the update tools.
I was able to successfully dump using fptw64.exe -d spi.bin, but with any others tools I couldnt. I got this error "Error 9470 fail to load driver (pci access for windows".
I have z87-hd3 with AMI aptio 4 F8 bios running on i5-4670k. I have v9.0 ME come with the lastest bios F8 from Gigabyte, but I couldnt use v9.0 tool, so I give v9.1 tool a try and able to dump spi.bin but thats all.
Any suggestion for this? Thank you so much.


Edit:I did read through your guide and research around that if the lastest bios is 9.0 then i need to use v9.0 ME and tool, but I could only use the -greset command and -d command with only v9.1 fptw64, v9.0 or any other version won't work, thats why I use 9.1 instead.

That error message also appear when I use Afuwin.

So what can I do to solve "Error 9470 fail to load driver (pci access for windows)"? Will flash a cleab region fix this? I dumped the spi and seem like file wasnt corrupted. Also tried the SCS discovery to scan but only found ME driver and the FW was fail. So it might have something to do with the firmware right?

Hi, im sorry to reply this.. i really need help..

have na ASUS p8z77-v lx out of nothing bios only recognize 8GB of my 16GB 4x4, the GPU doenst work anymore and the CPU multiplier has gone.. i cant find it anymore.
Im from brazil and i having trouble to understand what program i get.
can you please help me ?

I will try to reinstall my windows also do a clean bios update, and install a clean ME region after. Will report back my result.

I have a few questions and I hope someone could help me out. Motherboard is Its for ASUS Maximus Hero VIII and the latest BIOS for it is MAXIMUS-VIII-HERO-ASUS-3504.

1. For MEI Firmware 11.7.4.3314 - Win-RAID version of this firmware for S & H differs in size and name compared to the one found on Station Drivers, even though both are specific for/to Consumer S & H SKU's, the ones I need, and both are of identical version - 11.7.4.3314. Which one should I use? Currently, the name of the MEI Firmware within official BIOS is 11.6.10.1196 CON_H_D0 . I am inclined to use 11.7 firmware file from Win-RAID because file name resembles the one already in official BIOS. Another confusing point is that OP states (or at least implies) that motherboards/BIOSes with MEI version 11.6 should be updated with 11.6 Tools and motherboards/BIOSes with MEI version 11.7 should be updated with 11.7 Tools. OK, but what if I want to update 11.6 to 11.7? What tools should I use - 11.6 or 11.7???

2. UBU stated:

Zitat

---

This BIOS on Aptio 5 platform, known issues:
- It is not supported by the update files in the GUID A0327FE0-1FDA-4E5B-905D-B510C45A61D0
- There may be problems with updating the CPU microcode

---

What does that mean? Does it mean "Not Flash!" or "May not work" or "Likely will not work" ??? I did not flash the MicroCode to avoid problems, but I do not want to brick the motherboard. I have used UBU on 5 or 6 machines and never had an issue, but I also never had that message about not supported update files...

Thank you for your hard work and keeping UBU alive!