While running MEManuf:
Warning 463: A test returned from FW does not match known test by the tool: App(34) Comp(0) Test(2)
Warning 463: A test returned from FW does not match known test by the tool: App(33) Comp(2) Test(2)
is this something to worry about? Win 10 Creators Update x64, Asus H110M-K D3 w/ Intel ME FW 10.0.10.1002 H

Edit: Found the solution via Google. Simply by using the 11.0.x Tools - I thought they're all backwards compatible? Hm, whatever.
Also, am I blind or is there no guide on how to update? I know flashing a firmware isn't something for non-techies, but something like "1) Run "FWUpdate -SAVE OLD.bin" 2) "FWUpdate -F downloadedFW.bin" to update" could save the day.

Another thing after upgrading now however:
MEInfo shows no errors, but MEManuf does:

Error 237: No valid OEM ICC data programmed
 
Error 117: MEManuf Operation Failed
 

Should I reflash with a OEM ID provided, or doesn't it matter? (MEInfo shows OEM ID 0000-0000-....)

Thank you a lot, that worked. MEManuf now shows the success message.

I have cleaned the ME region on a few Apple Macbook BIOS but this A1706 Model BIOS doesn't look correct to me. When I run the ME Analyzer v1.1, I see that it is a Consumer LP ME v11.0.12.1010 with a length of 0x127000. The closest ME I can find to it is the Intel ME Firmware v11.0.24.1000 (CON LP) here t596f39-Inte...tem-Tools.html. The size of the v11.0.24.1000 ME is length 0x1F0000. When I copy the v11.0.24.1000 ME into the A1706 BIOS, it seems to run into another area that has valid data (not FFFFFFFFFFF that I have seen in the past). This doesn't seem right. Its almost like the v11.0.24.1000 firmware is too big. BIOS is attached. Am I doing something wrong?

Hello plutomaniac,

Fujitsu informations are that the C5731 will receive a Intel ME update, but that model has been released with Intel ME 5.2
Do you think they had a typo there or is it really possible to place a ME 6.2 onto a 5.2 ?

Well, I guess it's possible they managed to convince Intel to fix 5.2 too (assuming it has the same bug) but I'm doubtful...

Hi, I'm trying to update asus maximus viii formula z270 with firmware Intel ME 11.7 Consumer PCH-H Firmware v11.7.0.1229 but error
Error 8758: The image provided is not supported by the platform.
Excuse my english use google

Intel ME System Tools v11.7 r0 link off-line

Can someone help me?

I successfully "downgraded" from v11.7.0.1229 to v11.6.29.3287 on my motherboard, Asrock Fatal1ty Z270 Gaming K6.

plutomaniac,

Thanks for your help. I am new to this so I must have got lucky the few other times I cleaned an Apple ME.

I am using the guide here: https://www.ghostlyhaks.com/blog/apple-e...clean-me-region Which is not very detailed.

Can you link to the guide you referenced in post #129? How do I know if Apple is using custom firmware? My ME is 11.0.x and there is 11.0.x in the repo on the first page of this post but that one is too big. Should I always assume Apple is using a custom ME then?

Okay, I have a stupid question, you have been warned! Is there any way of going back to an older version, if latest doesn't work? Next question, if the flash process fails, am i able to get back the system, like a recovery backup or something? Thank you for your time!