I updated to the lasted Inel ME 9.0.31.1487 Corporate 5MB Firmware but I don't understand what different form my older 9.0.30.1482 firmware . Can you tell me the changelog form the lasted Firmware? Thank you

Intel MEI Drivers & Software v11.0.5.1192 for Corporate systems complete package:

http://asrock.pc.cdn.bitgravity.com/Driv....5.1192_SW).zip

plutomaniac,

need to fix link for v11.0.5.1192 Corporate in OP.

hi,one question please.this me region clear me or not? i can use in apple?

Hello,

sorry to interrupt with a quick question but this seems the only place to ask:
Will i be able to unlock Intel Standard Manageability to Intel AMT with remote KVM using a reflash? Or is there any other way?
Hardware is an i5-6500 with Q150 chipset (Fujitsu D756) and Intel ME v11.0.10.1002

regards
t.

Hello plutomaniac,

thank you very much for investigating my case, it is also very helpful in understanding how to work with the tools supplied by OP.

R1.13 BIOS for the D3431-A1x board is correct, i just flashed from R1.11 just to see if it would unlock ME, but to no avail.
It still says Standard Manageability in MEBx.

The flash descriptor also seems to be locked, i tried fptw -d spi.bin - error 310, no access for host CPU.
There's also only one Recovery Jumper on the board, which Fujitsu tells me is for resetting a BIOS password.
I can deactivate ME in the BIOS, but it is hinted that works only for the BIOS Extension, not the entire ME hardware.
Running fptw -disableME as per Skylake-H Client SPI Programming Guide.pdf gives me Error396: The request to disable the ME failed.
(irrespective of turning MEBx on/off in BIOS)

When i run ME Analyzer(r51) on the newest BIOS file available, i get the same output as you, but also underneath in yellow text:

--> Note: Multiple (2) Intel Engine Firmware detected in file!

I guess that's why we see a fully unlocked ME in the BIOSfile, while only Std. Manageability is available in MEBx, right?

Do you have any further tips, or should i rather assume my case is lost?

regards,

t.

Update: Windows 10 is running great with ME version v8.1.65.1586 along with IME driver 11.0.0.1181 - I no longer have any issues in device manager.
Edit: My ME was corrupt I was doing some reading this morning and I flashed the ME region and was able to repair the corrupt ME. Going to upgrade to v8.1.65.1586 and try Windows 10 again.


Hello I have an Asus Maximus V Formula. I am having issues with my Intel Management Engine in Windows 10. It causes slow boot up and shutdown times. With any IME driver 11, when I install 9.5 it works fine. I am trying to flash the ME v8.1.65.1586 but I keep getting an error

"Can't locate ME device driver."

I installed Windows 8.1 to see if that was the issue but I get the same error.

When I try to use MEInfo I get error 9458 "Communication error between application and Intel<r> ME module (FW Update Client)

I am on the latest bios 1903

Edit more info: When IME 11 driver is installed I get error 10 in device manager. status power failure
Current driver installed with no issues 9.5.10.1658
Current ME version: 8.1.0.1248

Also added my 8MB dump

hi,where download the me region clear 7.0.0.1193(a1278 2011) and 8.0.4.1441(a1278 2012)
this me region this is foro,is upadate or clear me?,thank you

Intel MEI Drivers & Software v11.0.5.1192 (1.5M) is out.