Hi, everyone! I'm trying to add NVME support to Voyo i7 plus I download BIOS files (Dropbox link) and try to use this manual but I see two bin files for flashing BIOS (10US.bin - 64kb and 300t_8m.bin - 8192kb). I open 300t_8m.bin in UEFITool, so there is no CSMCORE section but it already has NVME DXE driver. So, can I add another NVME DXE driver and what section?
@sysunit: Welcome to the Win-RAID Forum! Since the linked BIOS for your Voyo i7 plus contains already the required NVMe modules, you will have full NVMe support without any BIOS modification. Enjoy it! Dieter (alias Fernando)
My current System: MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro Donation Link: If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.
None of what's shown in those images have anything to do with NVME. Install windows, from USB initialized as GPT, to RAW disk, then you will see NVME or Windows Boot Manager in BIOS area where you choose hard drive boot priority (in boot section usually) You may see NVME anytime, unsure, in the second image area, at the bottom option "NVME Config" that usually show NVME brand, size etc
Please don't send PM's for help on BIOS edits, I can't help with BIOS in PM's. Please make a thread and I will try to help as soon as I can - thanks! If you appreciate my efforts and are willing to donate to help improve my hardware, gift cards work for me (Amazn, NuEgg, eBa) - send me a PM I view the forum like this, please bump your thread 1x every 24-48 hours if no reply
I explained above how it works. Initialize USB as GPT, then transfer your install media to it like you would any other USB Install. Remove all other USB and HDD/SSD's etc, so only the NVME is there + USB Windows installer Then if partitions already on NVME delete and make disk RAW before or during install via the troubleshoot/advanced menu. You can use Diskpart from CMD prompt in the troubleshooter pre-installed, then reboot and start install again once done >> Diskpart >> Select disk (choose NVME by size, you will recognize it) >> Clean >> Done, reboot, install windows.
Do not create any partitions on the NVME, select the drive and let windows do the install, it will initialize the drive and setup it's own partitions
Please don't send PM's for help on BIOS edits, I can't help with BIOS in PM's. Please make a thread and I will try to help as soon as I can - thanks! If you appreciate my efforts and are willing to donate to help improve my hardware, gift cards work for me (Amazn, NuEgg, eBa) - send me a PM I view the forum like this, please bump your thread 1x every 24-48 hours if no reply
Print view
Mon Jan 06, 2020 1:34 pm
reply
Win-Raid Forum (Drivers - Firmware - Modding)
»
BIOS Modding
»
BIOS Modding Guides and Problems
»
[HELP] Add NVME support to VOYO i7 Plus
