Help! with z390 aorus ultra bios f9 HPET SETTINGS

#1 | Help! with z390 aorus ultra bios f9 HPET SETTINGS datum

Sun Dec 22, 2019 1:51 pm (Last edited: Tue Dec 24, 2019 1:03 am)

Hello,

Can someone help me with the bios settings. I want to disable Hpet settings, but can't find it in bios menu.
Z390 AORUS ULTRA BIOS F9

----------------

BIOS: https://download.gigabyte.com/FileList/B...us-ultra_f9.zip

------------------------

Can someone modificate the bios :?

------------------------

I'm trying to change by myself but getting this error:

( F8 bios opens normally, but cant save after changes)

reply

#2 | RE: Help! with z390 aorus ultra bios f9 HPET SETTINGS datum

Sun Dec 22, 2019 10:01 pm

Please don't make multiple posts in a row, if you need to add more thoughts or questions please use the edit button, thanks

I will make you BIOS with HPET and a few other settings visible, please wait. I can't do it until tonight, sorry but I only have a few minutes right now before I have to run.

Please don't send PM's for help on BIOS edits, I can't help with BIOS in PM's. Please make a thread and I will try to help as soon as I can - thanks!
If you appreciate my efforts and are willing to donate to help improve my hardware, gift cards work for me (Amazn, NuEgg, eBa) - send me a PM
I view the forum like this, please bump your thread 1x every 24-48 hours if no reply

reply

#3 | RE: Help! with z390 aorus ultra bios f9 HPET SETTINGS datum

Tue Dec 24, 2019 2:23 am (Last edited: Tue Dec 24, 2019 2:23 am)

Ok i changed the hpet settings. ( edited bios: https://easyupload.io/zjlo8h ).
Now i can't flash mod. bios using q-flash :D.
Any help:?

reply

#4 | RE: Help! with z390 aorus ultra bios f9 HPET SETTINGS datum

Tue Dec 24, 2019 7:14 am (Last edited: Tue Dec 24, 2019 7:15 am)

@jonasdanys - Please wait, before you brick the board, I will give you a full menu edit so you can access that entire section (PCH-IO Configuration)
If you can't wait, and want to try your mod BIOS, here is how you remove the Qflash block - [OFFER] Gigabyte GA-Z370-Aorus Gaming 7 BIOS mod (6)

Please don't send PM's for help on BIOS edits, I can't help with BIOS in PM's. Please make a thread and I will try to help as soon as I can - thanks!
If you appreciate my efforts and are willing to donate to help improve my hardware, gift cards work for me (Amazn, NuEgg, eBa) - send me a PM
I view the forum like this, please bump your thread 1x every 24-48 hours if no reply

reply

#5 | RE: Help! with z390 aorus ultra bios f9 HPET SETTINGS datum

Tue Dec 24, 2019 11:05 am

ok, i will wait. Thanks :)

reply

#6 | RE: Help! with z390 aorus ultra bios f9 HPET SETTINGS datum

Sat Jan 04, 2020 5:52 am

@jonasdanys - Sorry for the delay here!! Can you please show me image of your "misc" BIOS page, I will put HPET setting there for you I think

Please don't send PM's for help on BIOS edits, I can't help with BIOS in PM's. Please make a thread and I will try to help as soon as I can - thanks!
If you appreciate my efforts and are willing to donate to help improve my hardware, gift cards work for me (Amazn, NuEgg, eBa) - send me a PM
I view the forum like this, please bump your thread 1x every 24-48 hours if no reply

reply

#7 | RE: Help! with z390 aorus ultra bios f9 HPET SETTINGS datum

Sat Jan 04, 2020 12:51 pm

No problem, thank you :).
I have attached bios photos, it's all good?

reply

#8 | RE: Help! with z390 aorus ultra bios f9 HPET SETTINGS datum

Sat Jan 04, 2020 10:21 pm (Last edited: Sat Jan 04, 2020 10:27 pm)

@jonasdanys - Please zip those images, thanks - Also, is that BIOS F9? If not, please link me to that BIOS. Those images don't match AMIBCP or setup module structure, layout, names etc

Please don't send PM's for help on BIOS edits, I can't help with BIOS in PM's. Please make a thread and I will try to help as soon as I can - thanks!
If you appreciate my efforts and are willing to donate to help improve my hardware, gift cards work for me (Amazn, NuEgg, eBa) - send me a PM
I view the forum like this, please bump your thread 1x every 24-48 hours if no reply

reply

#9 | RE: Help! with z390 aorus ultra bios f9 HPET SETTINGS datum

Sun Jan 05, 2020 1:35 am (Last edited: Sun Jan 05, 2020 2:51 am)

My edited bios and photos (F9 BIOS) : https://gofile.io/?c=s7ulTJ

reply

#10 | RE: Help! with z390 aorus ultra bios f9 HPET SETTINGS datum

Sun Jan 05, 2020 6:16 am (Last edited: Sun Jan 05, 2020 6:16 am)

@jonasdanys - why you're edited BIOS too?? I am on limited internet, and only need the images zipped. Did your BIOS edit disable HPET for you? If yes, can you use that for a little bit >>
Since that is F9 BIOS, and due to what I mentioned above at post #8, if you want to be 100% everything will be OK, do you mind to wait until I get a Gigabyte Z390 myself? That way I can test edits on my end and make sure all is OK before I send you any BIOS.
I plan to order one (Z390 M Gaming) soon from Amazon, but am still a little short on $$, so may have to wait a little longer, or take risk and purchase one of their "Used" boards which probably come with bent pins I have to fix and no I/O shield

Please don't send PM's for help on BIOS edits, I can't help with BIOS in PM's. Please make a thread and I will try to help as soon as I can - thanks!
If you appreciate my efforts and are willing to donate to help improve my hardware, gift cards work for me (Amazn, NuEgg, eBa) - send me a PM
I view the forum like this, please bump your thread 1x every 24-48 hours if no reply

reply

#11 | RE: Help! with z390 aorus ultra bios f9 HPET SETTINGS datum

Sun Jan 05, 2020 3:16 pm (Last edited: Sun Jan 05, 2020 9:44 pm)

I'm just trying to disable hpet, because this setting causes input lag on my PC. But probably my edit didn't work.
AMIBCP:

I don't know why, but my edited bios not saving after changes by amibcp.

reply

#12 | RE: Help! with z390 aorus ultra bios f9 HPET SETTINGS datum

Mon Jan 06, 2020 5:44 am (Last edited: Mon Jan 06, 2020 6:07 am)

This BIOS is probably not fully compatible with AMIBCP, sorry, I thought you knew how to same edit outside of AMIBCP and did that already. I assumed, hadn't looked, that this BIOS didn't even open properly in AMIBCP (I see it does now)
What do you mean "edited bios not saving after changes by amibcp."?? Do you mean you edited BIOS with AMIBCP, then saved, and flashed it, and then BIOS is messed up and wont save changes anymore?

I will make you BIOS with just HPET disabled, that I can do anytime, will edit it into this post in few minutes

* Edit @jonasdanys - Flash via Qflash, choose in-tact if asked, and once flashed clear CMOS, then reboot to BIOS and load optimal defaults
If that fails to disable it, send me your BIOS region dumped with FPT, then I will edit all additional NVRAM areas too
http://s000.tinyupload.com/index.php?fil...634626152955930

Please don't send PM's for help on BIOS edits, I can't help with BIOS in PM's. Please make a thread and I will try to help as soon as I can - thanks!
If you appreciate my efforts and are willing to donate to help improve my hardware, gift cards work for me (Amazn, NuEgg, eBa) - send me a PM
I view the forum like this, please bump your thread 1x every 24-48 hours if no reply

reply

#13 | RE: Help! with z390 aorus ultra bios f9 HPET SETTINGS datum

Mon Jan 06, 2020 2:34 pm

Yes, after flashed bios (edited with AMIBCP) no changes at all. I tried disable hyperthreading just for look, but same results.
After flashing yours bios, same :/. NO changes

Zitat von Lost_N_BIOS im Beitrag #12
send me your BIOS region dumped with FPT, then I will edit all additional NVRAM areas too

You need bios by dumped by AFUWIN? Its correct ?
https://gofile.io/?c=BK9HCz

P.S sorry for my english :D.

reply

#14 | RE: Help! with z390 aorus ultra bios f9 HPET SETTINGS datum

Mon Jan 06, 2020 2:45 pm (Last edited: Mon Jan 06, 2020 2:45 pm)

@ jonasdanys - No, please test BIOS I linked above in #12 - Flash via Qflash, choose in-tact if asked, and once flashed clear CMOS, then reboot to BIOS and load optimal defaults
Then, if HPET still enabled, I need FPT BIOS region dump (AFU should never be used on this system to flash BIOS)

Check BIOS main page and see if ME FW version is shown, if not then download HWINFO64
Then on the large window on left side, expand motherboard and find ME area, inside that get the ME Firmware version.
Once you have that, go to this thread and in the section "C.2" download the matching ME System Tools Package
(ie if ME FW version = 10.x get V10 package, if 9.0-9.1 get V9.1 package, if 9.5 or above get V9.5 package etc)
Intel Management Engine: Drivers, Firmware & System Tools

Once downloaded, inside you will find Flash Programming Tool folder, and inside that a Windows or Win/Win32 folder.
Select that Win folder, hold shift and press right click, choose open command window here (Not power shell).
At the command prompt type the following command and send me the created file to modify >> FPTw.exe -bios -d biosreg.bin

Right after you do that, try to write back the BIOS Region dump and see if you get any error >> FPTw.exe -bios -f biosreg.bin
If you do get error, show me image of the command entered and the error given
^^ This is important step, don't forget ^^

If you are stuck on Win10 and cannot easily get command prompt, and method I mentioned above does not work for you, here is some links that should help
Or, copy all contents from the Flash Programming Tool \ DOS folder to the root of a USB Bootable disk and do the dump from DOS (FPT.exe -bios -d biosreg.bin)
https://www.windowscentral.com/how-add-c...creators-update
https://www.windowscentral.com/add-open-...menu-windows-10
https://www.laptopmag.com/articles/open-...ator-privileges

Or here is simply registry edit that adds "Open command window here as Administrator" to the right click menu
Double-click to install, reboot after install may be required
http://s000.tinyupload.com/index.php?fil...134606820377175

Please don't send PM's for help on BIOS edits, I can't help with BIOS in PM's. Please make a thread and I will try to help as soon as I can - thanks!
If you appreciate my efforts and are willing to donate to help improve my hardware, gift cards work for me (Amazn, NuEgg, eBa) - send me a PM
I view the forum like this, please bump your thread 1x every 24-48 hours if no reply

reply

#15 | RE: Help! with z390 aorus ultra bios f9 HPET SETTINGS datum

Mon Jan 06, 2020 4:12 pm

Zitat von Lost_N_BIOS im Beitrag #14
@ jonasdanys - No, please test BIOS I linked above in #12 - Flash via Qflash, choose in-tact if asked, and once flashed clear CMOS, then reboot to BIOS and load optimal defaults

Yep i did everything. Flashed via qflash and cleared cmos. No changes. :/
Dumped bios FPT:
https://gofile.io/?c=htEDx9

reply

Please enter a reason for warning.