Unfortunately, @Enzaii never came back. I'm still very interested to get Port 2 shared so I can use a Dual-NVME card from Supermicro.

Thanks guys anyway.

Hello everyone!
I am grateful for the help on this forum.
I want to tell you about my experience with the motherboard that I have.
After they helped me to make BIOS in the branch, I reflashed it.
I didn't get the result with 4 NVME drives because of the architecture of the motherboard itself.
At most, if you have one 8-lane line to one PCIe, then only two drives on this connector will work. The second two do not turn on.
In order for all four disks to be recognized and work in the system as expected, 16 lines without switches need to go to the PCIe connector.
If there are switches (multiplexers) on the PCIe bus, they will not work in this form, or one or two at most.
All 4 disks in my PC configuration I could only enable by purchasing an adapter with a chip on it (PCI-E 16X to 4P NVMe adapter, Model LM313), ASMedia ASM2824 chipset is equipped with a PCIe 3.0x8 input port.

Hey Guys,
are there any updates on pcie bifurcation on the Asus Z10PA-D8?
I've got the Asus Hyper 2 4x Nvme and wanna use it on one of my pci 16x
Can anyone help me with bios modding?
Thanks!

[quote=Lost_N_BIOS|p99993]Maybe you didn't choose correct port to edit? It's not always what you think, how it looks to be ect, usually you have to change them one by one to then see the change and be able to tell which setting applies to what port.
In general though, probably AFUWin is only making you think it's flashing the BIOS, when it's really not. Does this board not have USB Flashback? If not, see below

Can you already see IntelRCSetup page in the BIOS?

Once downloaded, inside you will find Flash Programming Tool folder, and inside that a Windows or Win/Win32 folder.
Select that Win folder, hold shift and press right click, choose open command window here (Not power shell).
At the command prompt type the following command and send me the created file to modify >> FPTw.exe -bios -d biosreg.bin

Right after you do that, try to write back the BIOS Region dump and see if you get any error >> FPTw.exe -bios -f biosreg.bin
If you do get error, show me image of the command entered and the error given
^^ This is important step, don't forget ^^


If you are stuck on Win10 and cannot easily get command prompt, and method I mentioned above does not work for you, here is some links that should help
Or, copy all contents from the Flash Programming Tool \ DOS folder to the root of a USB Bootable disk and do the dump from DOS (FPT.exe -bios -d biosreg.bin)





















Could you please help me modding my Bios please? ;)