Zitat von Lost_N_BIOS im Beitrag #30

---

This BIOS is UEFI, and it has CSM, and I linked you to a user with this exact model board that already flashed NVME mod BIOS and installed windows 10 to it in the past

Until we hear from that user, you'll have to wait or send him PM. Obviously Secure boot mode is already enabled, since CSM is in the BIOS and enabled by default, if there was not secure mode enabled this option would not be in the IOS and enabled.
Just because you cannot see a setting doesn't mean it's not there or enabled etc. Plus, as mentioned, that other user already confirmed Win10 install on this system.

---

See post #2, and post #6 where I gave exact post #'s from that thread. I already tagged him here too in this thread, hopefully he'll stop in in next day or two
His BIOS would be same exact one I sent you and you are already using, mod BIOS for this only done two ways and you already confirmed UEFITool method wont flash so he had to use MMTool method.

Zitat von Lost_N_BIOS im Beitrag #32

---

See post #2, and post #6 where I gave exact post #'s from that thread. I already tagged him here too in this thread, hopefully he'll stop in in next day or two
His BIOS would be same exact one I sent you and you are already using, mod BIOS for this only done two ways and you already confirmed UEFITool method wont flash so he had to use MMTool method.

---

@Lost_N_BIOS

What do you think about the previus message here posted?
IS it really beliveable that CSM-UEFI boot is enable with this reported message?
here is the Bios chip file extracted with the USB programmer
Chip is a MX25L3206E

HERE IS THE FILE