I mean, ANY BIOS Backup you made BEFORE you flashed in ANY Modified BIOS, using ANY Method.

Zitat von Lost_N_BIOS im Beitrag #16

---

I mean, ANY BIOS Backup you made BEFORE you flashed in ANY Modified BIOS, using ANY Method.

---

No, you "Added" something to that, thus that is a modified BIOS. I want the file you dumped from BIOS, which you then edited. However, I doubt you did that, you probably edited stock BIOS, then flashed it.
If you did dump BIOS, before you edited it at first, send me that unedited first BIOS Dump/backup (not a stock BIOS, not an old stock BIOS, only an untouched BIOS backup from your system is what I mean)

The file i sent you before... (together with a pictur of AFUWin64GUI picture) is a CLEAN dump of stock Bios WITHOUT ANY EDIT or MOD's

this : CLICK

That one is messed up too, ie you flashed by /GAN before making that dump, or edited the BIOS and flashed in other way before making that dump - or someone else did possibly, if you are not the original purchaser of this board.
However, all these BIOS are working (ie bootable) for you, so we can properly edit any of them with NVME Mod. Which do you want me to use? I will make you mod BIOS properly with both MMTool and UEFITool, then you can test

i just need a working Bios for a normal M.2 PCie SSD.
I'm in your hands.. :D

Here you go - flash with EZ Flash (May need renamed to stock name, unsure, if so only put on on USB at time since it has to be in root of USB) - http://s000.tinyupload.com/index.php?fil...707945212611891

there are 2 ROM files in the archive.
I can flash anyone of those? or it's a sequence of flashing? one first and then second?

Yes, either. It's same mod BIOS, but one has NVME edit done with UEFITool and other done with MMTool.
In case one is failing on this board, use the other.

Zitat von Lost_N_BIOS im Beitrag #24

---

Yes, either. It's same mod BIOS, but one has NVME edit done with UEFITool and other done with MMTool.
In case one is failing on this board, use the other.

---

Either should be OK since CSM is enabled, just be sure NVME is RAW

Maybe @-=N&N=- will get a PM about this tag and stop in to advise too, if not, you could also try sending him a PM

UEFITool files has been not even recognized as valid from EZ Flash utility.
MMTool accepted and flashed but.. unfortunately it return the same issue.

NVme SSD is not initialized but once the MBR/CSM USB win10 installation reach the selection of the drive where to instal to, it mark the disk as Not bootable.





@Lost_N_BIOS

Sorry, I can't understand what that Win10 install page is showing since text is not in English (I need to see all buttons, info there in english (not you explain)
However, I thought of this, here is much easier thing you can do! Install Win10 on SSD normally (or spare HDD, but if you do HDD be sure to align partition first manually like it's SSD)
Then clone to NVME as I outline at following link, it's info about doing this for Win7, but you can do Win10 just the same - Installing Clean Win7x64 on M2.2280 PCIe Gen3x4 SSD A-DATA SX8200 Pro

Zitat von Lost_N_BIOS im Beitrag #28

---

Sorry, I can't understand what that Win10 install page is showing since text is not in English (I need to see all buttons, info there in english (not you explain)

---

As I mentioned, you explaining "Some" of what is shown there is not what I need. I need to see that exact image all in English

Please use edit option if you need to add more comments and no one has replied yet, thanks

This BIOS is UEFI, and it has CSM, and I linked you to a user with this exact model board that already flashed NVME mod BIOS and installed windows 10 to it in the past

I never mentioned Acronis, nor should you use it, unless you find a guide showing you the EXACT same thing I made guide for (which is not a general clone guide)

Until we hear from that user, you'll have to wait or send him PM. Obviously Secure boot mode is already enabled, since CSM is in the BIOS and enabled by default, if there was not secure mode enabled this option would not be in the IOS and enabled.
Just because you cannot see a setting doesn't mean it's not there or enabled etc. Plus, as mentioned, that other user already confirmed Win10 install on this system.