That method you linked it for use on WinPE only, you'd have to install this to some spare HDD/SSD or boot to live WinPE CD etc.
Thanks for video, yes, that is odd what's going on there! Did you try both enter keys (if two on the KB)?

Here is what you need at Amazon, this also includes 1.8V adapter, that you may or may not need, but will come in handy for you in the future if not needed here (only $2-3 more to add, so might as well get)
https://www.amazon.com/Organizer-EEPROM-...r/dp/B07V2M5MVH

@Lost_N_BIOS Thanks, ordered....It should be here tomorrow. I just noticed I didn't have the latest BIOS & ME Firmware, I opened RU after I updated everything but still the same issue. Would the newest BIOS & ME Firmware make a difference in the other processes we tried?

Also, I booted with a Hirens Windows PE Live as suggested but couldn't run the Utility as it needs Net Framework and it comes disabled and no way to enable it on that particular Windows PE Live version.

Thanks!

@Downloader - Latest BIOS may help, but seems like it didn't?
Hiren's is too old, and meant for other purposes, unless there is some new/updated version (Says here last update was 2012).
You may be able to install needed .NET while in there though, unless reboot post-install is required?

You need something like this, modern, both of these look like they show you how to setup .NET pre-install too. Lots of random links/methods to follow
https://docs.microsoft.com/en-us/windows...npe--windows-pe
https://4sysops.com/archives/winpe-for-w...or-a-usb-stick/

See also
https://docs.microsoft.com/en-us/windows...nents-reference

Guide
https://deploymentresearch.com/windows-8...and-powershell/

Or, here, they discuss how to integrate .NET into a win8 PE, probably same/similar method for Win10
https://www.neeosearch.com/add-framework...on-environment/
https://superuser.com/questions/1146933/...t-on-windows-pe

Or, see link above (about Hirens), there is two mod Win10 PE versions chosen as #2-3 in their "best PE" list

I did find some mod versions of Hirens here, with Win10 PE, one is in the uubyte list above too
https://www.aioboot.com/en/hirens-bootcd-pe/

But, all moot point, once your programmer arrives

@Lost_N_BIOS My programmer will be here in a hour so I want to be ready, I know I will need to read my BIOS Chip and send it to you for modding right? Please direct me on what else do I need (software, drivers etc...) to do the process. I'm super excited as it looks like I could have this done soon!

Thanks!

@Downloader - Don't get in hurry!! You will need to read the chip ID off the chip, then I can tell you what is best software to read and write to chip.
Here is guide - [GUIDE] Flash BIOS with CH341A programmer
And here is software package with many versions of software - https://ufile.io/p21lj9ck

Yes, once you know what software to use, you will read chip, verify, and then save once verify is OK. Then send to me, I will edit, then you will open program again >> erase >> blank check >> Open BIOS file >> Write >> Verify

@Lost_N_BIOS Opened up the laptop and found the Bios Chip, attached a photo. I think is the same as another poster at the beginning of this thread that has a Micron 25Q128A (real name N25Q128A) according to him.

Programmer in hand! What's next?

Thanks!

@Lost_N_BIOS Probably you must be pretty busy so whenever you have the chance I'm waiting for instructions. Really appreciate all your help.

Thanks in advance @Lost_N_BIOS

@Lost_N_BIOS Can you help me with the next steps to complete this?

Thanks in advance

@Lost_N_BIOS Hello, can you please help me to complete this?