Hello everyone, I encountered a problem.
I have a DELL PowerEdge R740 server. Can I modify its logo and delete the product model name (PowerEdge R740) in BIOS?
Who has experience in this area？ Thx

BIOS:
https://dl.dell.com/FOLDER05789612M/1/BI...WN64_2.3.10.EXE

@nightwind - Check BIOS main page and see if ME FW version is shown, if not then download HWINFO64 and on the large window on left side, expand motherboard and find ME area, inside that get the ME Firmware version.
Once you have that, go to this thread and in the section "C" download the matching ME System Tools Package (ie if ME FW version = 10.x get V10 package, if 9.0-9.1 get V9.1 package, if 9.5 or above get V9.5 package etc)
Intel Management Engine: Drivers, Firmware & System Tools

Or, you may need SPS or TXE System Tools packages, unsure, since the BIOS you linked above only extracts to a encrypted partial BIOS file (R740-020310C.cap)
You may be able to tell which type you need by the ME FW driver type on your driver download page, but ME Driver version has nothing to do with ME FW version, so you still need to find what FW is used before you can select the right tool package
If you have a flash programmer, that would resolve all the uncertainty here, dump BIOS and send to me
Intel Trusted Execution Engine: Drivers, Firmware & System Tools
SPS - no link, if you have SPS ME FW type, let me know version and I will send you PM


Once downloaded, inside you will find Flash Programming Tool folder, and inside that a Windows or Win/Win32 folder. Select that Win folder, hold shift and press right click, choose open command window here (Not power shell).
At the command prompt type the following command and send me the created file to modify >> FPTw.exe -bios -d biosreg.bin

Right after you do that, try to write back the BIOS Region dump and see if you get any error, if you do show me image of the command entered and the error given >> FPTw.exe -bios -f biosreg.bin
^^ This is important step, don't forget ^^


If you are stuck on Win10 and cannot easily get command prompt, and method I mentioned above does not work for you, here is some links that should help
Or, copy all contents from the Flash Programming Tool \ DOS folder to the root of a USB Bootable disk and do the dump from DOS (FPT.exe -bios -d biosreg.bin)
https://www.windowscentral.com/how-add-c...creators-update
https://www.windowscentral.com/add-open-...menu-windows-10
https://www.laptopmag.com/articles/open-...ator-privileges

Or here is simply registry edit that adds "Open command window here as Administrator" to the right click menu
Double-click to install, reboot after install may be required
http://s000.tinyupload.com/index.php?fil...134606820377175