https://ufile.io/46u5h3yb

@Fernando
Thank you for your interest in my problem.
I will not put RAID but AHCI.
Because:
1) I only have the same two (2) old (and slow) 2T hard drives.
A (1) old (and slow) hard drive in 3T ... and ... A (1) fast hard drive at 4T.
and
2) I have no idea about RAID. I have never worked with RAID.
----
The "Standard SATA AHCI Controller" drive is unstable (when it is slow ... and ... when it is fast).
The best results (always in AHCI mode) in CrystalDiskMark 7.0.0 x64, given by the driver:
64bit Win8-10 Intel RSTe AHCI & RAID drivers v5.5.4.1036 WHQL.
-
There are no drivers for 13x series and Windows 10 20h2.
see this here:
https://www.station-drivers.com/index.ph...&id=269&lang=en
-
I have not found a solution. But : I have a lot of headaches and fatigue.
----
====
Can you modify my three Bios: https://ufile.io/46u5h3yb
https://ufile.io/46u5h3yb
So that I can be able to test them.
Thank you very much.

EDIT by Fernando: The original text has been recovered by me on 12/27/2020.

@Fernando
Lost_N_BIOS has not been making the 13.1.xxxx Bios I asked for for so many days.
Thank you very much.

EDIT by Fernando: The original text has been recovered by me on 12/27/2020.

Great info, learned something new today, thanks @Fernando ! (In reply to #180) Did not see above until I replied

I knew Kwstas did not use RAID, but was not 100% sure he was also not even testing RAID. I do believe @guru3d who tested many BIOS while I worked on this, IS using RAID.
And, I assume many other users will eventually use the final modified BIOS I post too, so I don't mind to update everything while I'm doing the mod
All is done now, in general, but I do think I should remove the ASMedia orom in some final package.

I m using raid (raid zero 2X 850 Evo as a game drive)with rst software v13.2.8.1002 , I am on the latest bios since the release

edit version typo v13.2.8.1002

@guru3d - Can you confirm, last BIOS I posted, RAID was OK there too? #164
If yes, then 13.5 is fine on this model (in BIOS @Kwstas )

Kwastas there is no reason to make 13.1 or 13.2 RAID BIOS, when 13.5 works fine. Your initial request was all the latest, that is "the latest"
Plus, you were concerned about others downloading and using too, saying latest would be best for everyone, so that's what I did and we worked long time to make it proper without breaking BIOS.
Why would you want older now? That goes against your main request of wanting all the latest Especially since you do not use RAID, no point to downgrade it now for no reason

@Lost_N_BIOS
it is fine

@guru3d - Thanks for confirmation

@Fernando, yes, I only ever spoke of EFI module / Option Rom. And I mean without issue, as in I read the info and guides, and found the highest appropriate RAID modules for this chipset/board based the EFI/oRom guide info.
I never spoke of any drivers in here, other than to say same I am now >> I was never talking about drivers

So, any info similar or same as you posted above about drivers, that would be up to the user to find and see in the driver thread/guides.
I never suggest any driver versions, only tell people to check the driver threads to see what is best/suggested per their chipset/board etc

So, based on your last bold bit, do you think I should remake this BIOS for them with 13.2 instead of 13.5 modules?
That last bit may be why Kwastas was wanting one more edit package, I guess he never explained it to me where I noticed 13.2 may be better than 13.5 performance-wise
However, he's never been after performance, and is NOT using RAID, so even if he understood 13.2 may be better for performance, it may not be better for his non-RAID issue/concern

@Fernando - Thanks for clarifying! It would not take too long to downgrade back to 13.2 from 13.5, I'd just have to make new 13.2 FFS and swap in there.
Oddly, this board, no matter how you try to edit the EFI RST module (MMtool ALL, UEFITool ALL, UBU etc), it causes various issues (failed OC, broken memory stuff, stall on POST Codes etc), unless you make or insert already made EFI FFS for RST
This also maybe applies to another EFI module too, I forget, but it's in the edit change log.

Plus, I do need to make a final here, and remove that inserted ASMedia orom, it's not loaded or used by anything so SoniX said no point to have in there.
So, do you think it's best for all users that I put in 13.2, or it's OK to leave 13.5, if/when I redo this?